Reviews
Timing to introduce is a limited item.
Misrepresentation repayment sticker, what size Size is Large
Does not it slightly interfere with Mounting Bolt when trying to paste Balance well on the License Plate?
I used Bolt with high designality, so I was always worried.
As a product to solve it, I bought it and wore it.
There are plenty of choices such as Color of Anodized, you can demonstrate personality.
Low head HexBolt was also included and easy to install.
The only drawback is that Timing to introduce should be done when renewal of mandatory vehicle liability insurance...
* Re-issue of Seal during the contract period, since it takes much time and effort to confirm the identity, Large change - - -
Since it comes with Ring when used as Key Holder,
It is possible to use it as Key Holder until the time of mandatory vehicle liability repayment renewal.
After that, I'd like to find a long Size in the same design as Bolt of Right Side and make it available.
View detail
Fits: HONDA little cub, HONDA Press Cub 50, HONDA Super Cub 90, HONDA Super Cub 70, HONDA Super Cub 50, HONDA little cub, HONDA Press Cub 50, HONDA Super Cub 90, HONDA Super Cub 70, HONDA Super Cub 50
I am using it for SUPER CUB 90Custom
CoverBand has responded to it before the crack of the end of the Leg shield occurs. I attached Vietnam Carrier so it took time to install but it was able to install safely View detail
Radiator guard was made cheaply.
I bought it instead of Radiator guard.
Material : Because it is Aluminum, Guard can not be done from the big lures such as stepping stones, but I think that it protects from insects and so on. We cut it to the Large size of the Radiator and used the rest for the Duct part of Front tireCover. The color is slightly darker than Kawasaki's Lime green a bit..
View detail
Only looks!
Motorcycle performance, not just the appearance, only looks! Carbon Material thought that it was a harder product, but it is surprisingly soft, it is thin with Funafunha. - - - Anxiety factor.
Installation is a pon attachment! (5 minutes)
View detail
It is good to be able to multiply with Chain
When removing Wheel, multiply Swingarm with Dustcloth
It will cure by preventing scratches by Chain
It is convenient to be hooked by this hook.
But I wonder if I will put Dustcloth in front of Hook.
Installation of Chain cover Nut (6mm) Is not used
Carbon fender's Chain cover part
Cut and install it to the rear side.
It's an Anodized Treatment so it looks nice.
View detail
Looks nice Parenthesis?
RearBrake master 's Tank looks awesome, someday I want to buy it, it was good that I could buy it cheaply at Sale. The installation is to fix Color with Bolt biting Color. View detail
Fits: HONDA dachshund, HONDA Shirley 70, HONDA dachshund
Brake meter cable
Nice part for my fender, lil think put this part for tidy up my cable meter. My dax still process building, i still need any parts View detail
price - Materials were good together
Although the margin liability Plate was putting down because the price setting was high to what mind
Engine Displacement Volume As you change the Number and change the mandatory vehicle liability
Is it cheaper compared to others and it's your favorite color? (Material) I bought it together because there was.
Easy to install and easy to install, as long as it knows how to use the hexagon stick.
However, although it is a black board in this picture, since there are some patterns on the Reverse side
Perhaps I may be attaching it in reverse.
Well, if you attach it in reverse, I think that this is fine.
View detail
It is largely satisfactory.
The color is vivid and beautiful.
The shape of NASA Type is Cool.
It became a good Accent, the appearance was tightened.
View detail
It is Image.
As I tried installing it, it was Image, but I thought that it was somewhat cluttered every time I saw Visual from behind for a few days I removed it.
It is nice to be able to stick the Simple, mortuary liability Seal beautifully, but for that I thought that it might not bother to increase Parts.
View detail
Instruction Manual is hard to understand
Handlebar End is difficult to understand ...
Cap bolt installation location (Recommended position attached to Instruction Manual)
Windshield : Can be installed even with Y's Gear Middle Screen
- Around Handlebar : Can only use Cap when using Y's Gear Handlebar Clamp
- Around Rear Carrier : Y's Gear Side stay can not be installed when using
View detail
Fits: YAMAHA TT-R50E, YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA YZ250F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ400F
FashionItems. Functionality Nothing particularly (lol
zeta's FashionItems.
Anodized processed and coloring is beautiful.
It is a self-satisfying product.
A hexagon of 10 mm is required for installation
View detail
Very good at Other Parts of Design.
Normally, most people exchange only Fluid Tank Cap,
This is a type that covers the entire Fluid Tank Type that is not in other companies Parts.
As Black Ninja 250, Fluid Tank had plastic White as a conspicuous one,
By attaching this Tank Guard, the whole is tightened with Black.
I am very satisfied..
View detail
It is convenient after changing name
After registering Motorcycle Motorcycle
Although mandatory vehicle liability insurance is indispensable
If you attach insurance Seal directly to Number
When name changes When Number changes
Seal needs to be reissued.
This is quite time consuming
Bolt included is also a hexagonal Bolt with small irregularities
We will also refresh its appearance.
View detail
Quality is good.
Quality is good, but it is expensive.
It is easy to purchase if you make it cheaper.
As a use place, I use it instead of Bolt's Washer fixing Plastic parts etc..
It is a good feeling that the contact surface increases, and when I tighten Bolt it does not bite me, I am saved.
View detail
High quality
Satisfied!
Price, also a little cheap and Large satisfied!
If there is no fading of Anodized in the future, it is good, it is good ... Because there is only a crown of Premium, sole is a shine which seems to be unlikely, so Large durable.
Because I had a disappointment that one product faded in half a year.
View detail
Fits: HONDA CRF150R, HONDA CRF250R, HONDA CRF450R, HONDA CRF450X, HONDA TRX400 EX, HONDA TRX450 ER, HONDA TRX450 R, HONDA XR250, HONDA XR250 Baja, HONDA XR400 Motard, HONDA XR250MOTARD, HONDA CRF1100L AFRICA TWIN ADV SPORTS
FashionUp
What made you decide the purchase?】 Appearance and weight saving. And Campaign price
【How was it actually used?】 No change
【Was it difficult to install? (Hard parts case)】 Since OEM was removed many times, it was easy
【Please tell me the point of installation and hang (in the case of Hard parts)】 Insert the tool with high accuracy and firmly in the back
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
[Is there anything I was disappointed about?]
【Hope for Manufacturer - Please let me know if you have any improvement points]
【Have you compared items?】 None
[Others] Oil leak can be avoided if you work after defeating a little to Right Side at the time of installation. I worked as is and spilled the Oil. As a precaution, I also recommend receipt of Oil
View detail
A beautiful dish
There is nothing, just Bolt,
Anyway it's a beautiful shade and perfect for Dress-up.
This product is only Bolt, Nut is not included,
You are going to divert what you are currently using.
It is a little expensive item, but it will be good for a change of pace.
I bought at Point. I wonder if I did not purchase it at actual expenses (Bitter smile)
01. Wallet has room
02. Point can afford
03. Somehow I want to customize somewhere
I think that it is a product of Recommendation for such people.
View detail
Will it tighten?
Although there are no issues at all if there is nothing, Parts around Rear think that you can see a little tightening around it.
I was at a loss as to whether to make Dry carbon, but made FRP Black for price and delivery.
I think that this was good with this.
View detail
Imechen
I was concerned since purchasing. I purchased Twill Weave Carbon. Since other Carbon uses the same material, the atmosphere is perfect. Just because I am wearing an Exhaust Bracket outside the company, it is regrettable that I did not feel like FEM like OEM, but when dealings I will become a different image. View detail