Reviews
Fits: SUZUKI V STROM 1050, SUZUKI V STROM 650
Purchased for Loading Hook
I purchased this for the installation of the Loading Hook.
I may replace the Blinker sooner or later, so I need one with Service hole.
It is well made
View detail
Inexpensive and functional!
Nut is anti-loosening Type, which is good for Number. View detail
I wanted Black!
This is great! It's a bit of an accent. View detail
Lightweight and good.
[How is it used?
When I replaced the Tail Lamp on my Vmax 1200 with Universal Product 'It would be better to make the License Plate Holder lighter and less shaky.' and ad vise, so I exchanged it.
Was the one you received as per Image?
It was lightweight (about 149g) and had a good texture.
How was your experience with it?
no problem 。 Titaniumium Flange Bolt Standard Brand:ZETA Item Number:D6594 I was thinking of purchasing this Bolt, but I didn't need it because the Bolt that came with the product was also of good quality.
[Points to note]
Spring washer is not included.
How did it compare to other products?
I am satisfied. I looked for something lightweight, so Material:License Plate Holder in Aluminum was excluded.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Product weight should be stated.
Installation instructions are in the photos only. I think it would be safer if precautions and other information were on the back of the PACKAGE.
The Black colored Washer was not included for 126cc and above. it seems to be different from the 50−125cc Washer.
View detail
Expectations for weather resistance. I think it will sell better if there are results of weather resistance test.
Unusual Material for License Plate Holder:Plastic, and AES resin. I had been a little curious about it for a while, but this time I decided to use it for my air-cooled LTWIN, which seems to generate more vibration than the air-cooled 4-shot that I ride on a daily basis.
First, Carbon Like." However, it is quite luxurious. It is not a smooth surface, but a texturing-like finish that gives the Carbon ground.
Compared to cheap carbon, this one has a more luxurious feel.
Also, whether it is Carbon or FRP, there are some edges missing due to slight tipping, etc, [Color] It would be quite poor and disastrous if Clear were floating or yellowing, but that does not seem to be a concern.
For functionality, if you want to use it on a motorcycle that vibrates a lot, use a license plate holder made of aluminum or other gold alloys, or FRPMaterial.:I definitely recommend this over Carbon's License Plate Holder.
Since it can tolerate quite a bit of sway in terms of material, it is excellent for vehicles that are off-road, SR400, or larger vehicles with Big single or TWIN engines.
I know many people suffer from cracking of the License Plate itself due to vibration in Single Motorcycle, but I think just replacing the Holder with this would be a preventive measure.
We have heard that AES resin is often used in automobiles such as Aero and Bumper because of its good weather resistance and moldability, which can be said to be upwardly compatible with ABS resin, but we would like to measure the Level of weather resistance compared to ABS resin in future use.
In the first place, Quantity:It's like 1pc.2000 yen, so if it keeps for a year, [Color] I think it's totally more cost-effective than paying 10,000 yen for Real Carbon, where Clear's Yellow change is inevitable.
However, AES is sensitive to organic solvents, so it is desirable not to apply too much VANVAN to parts cleaners and the like.
I had a feeling that the Large hand would imitate the Genre items in the future, since they had not existed in the Motorcycle Aftermarket parts until now.
View detail
perfectly (suited)
Perfect for your local Number!
The number is small, so it is not likely to be bent even if it was there much.
It is safe.
I'm putting up the Seal of the Shrine Amulet.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
License Plate bend prevention
Before I installed the License Plate Base, I used to catch my pants and bend them, but since I installed the License Plate Base, I haven't had any problems. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Simple is Best!
It is a perfect score because it was intended to reinforce the License Plate. 。
It is excellent in terms of strength, texture, and cosmetics.
It is not suitable for dress-up purposes, as it has almost no dress-up effect.
View detail
To one point!
I put it on because I wanted a change in appearance. View detail
Fits: Others Universal
DAYTONALicense Plate Holder
I had been looking for the color I wanted, but could not find it. I was able to buy other items at the same time, so I was able to get free shipping and I am satisfied with the large size. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Necessary and sufficient
Solidly made, thick and strong enough.
It is necessary and sufficient since it is installed for the purpose of preventing distortion and bending of the Number.
View detail
Parenthesis OK
This is especially true for off-road motorcycles, but if the License Plate is simply attached to the Fender, it will bend easily at the slightest touch.
For this purpose, various license plate holders are available, but to be honest, they are just license plates, so there is no need to demand such high quality (they are not visible anyway), and it is difficult to choose the right product.
This Carbon Plate-like back plate by MotoServiceEdge has a Carbon-like finish on the surface, which looks really cool at a glance, like a Carbon plate.
The size is a little larger than the License Plate. Carbon-like." pattern is a little visible.
The price is reasonable and I recommend this!
View detail
Casual Accent but satisfying!
Balance of price and texture is good.
I wanted to match the color of the car body, so I am satisfied.
View detail
Effective for License Plate resonance countermeasures
I was going to have the License Plate of VANVAN200 reissued because the crack started from the edge of the Mounting Bolt seat and the crack has been growing since then. I decided to purchase this product as reinforcement. 。
View detail
man who will not bend
I once had a crack on my moped license plate, and after consulting with a motorcycle shop, I was told that I could use a washer between the screw and the plate holder to prevent vibration. Since then, I have been buying and using PlateHolder for all types of vehicles.
DAYTONA's License Plate Holder comes in a variety of colors, so it was hard to decide. At first, I thought I would choose Gold, which is not seen very often. However, I thought that the yellow color Number would look too large, so I decided to go with black this time.
It is easy to install and the material is aluminum plate. The spacer is also more solid than shown in the photo. The PlateHolder gives the PlateHolder a high quality feel and a top ranking. It also protects the thin and bendable moped license plate.
Moped License Plates have different shapes depending on the municipality. The recently popular local moped numbers are often of a unique shape. Plate holders with raised edges cannot be installed. It is advisable to check the shape of the number before purchasing.
Basically, when you buy a new car, you also get a new License Plate. New plates look good on new cars, so I buy a new Plate Holder every time I buy a new car. I am planning to change the color of the Number to Pink in the near future, so I will buy a new one in a new color. It comes with Washer, but the price is not too expensive, so it is very helpful.
View detail
License Plate is cool.
I am very pleased with the new License Plate and think it looks great. I think it is worth the price. View detail
Carbon peeks out while protecting the License Plate. "Tune." 。
[How is it used?
SEROW250 was originally used for mountain riding, but recently SEROW225WE has been used more frequently for mountain riding, and SEROW250 has become almost a street riding spec.
I was browsing Webike's product introductions to replace my flashy License Plate Holder with a more subdued product, when I found this product.
So-called "Carbon Style" It is a Holder with a pattern that is not a "Tune." The material is ABS plastic, and the price is low, so it is an exact product for my purpose and my wallet situation.
How was your experience with it?
The holder is not as strong as the Gold License Plate Holder, and is almost as large as the License Plate, so it is barely visible from the front side after installation.
Quantity:Pair (for Left and Right) or License Plate, but it is only glimpsed from the bottom of the License Plate, I don't want to put a prominent License Plate Holder on it." I think this product is just right for those who are interested in this kind of product.
Although it is a little less strong than the Gold series, it is strong enough to function as a license plate holder, and at this price, I think it is an attractive enough product.
How did it compare to other products?
As mentioned above, it is only slightly larger than the extra License Plate, so it is not noticeable. The type of Holder that can protect even the frame of the License Plate attached to the SEROW225WE that I use for mountain activities stands out, for better or worse. Intended Use." Ya Preference I think you can buy whichever you like.
It makes the License Plate harder to bend." and other functional aspects are not a problem for any product, so you can find a product with the Type you like at Webike.
[Points to note]
Material is Material:Because it is plastic, it can crack if handled roughly and may melt or deform in high-temperature environments.
the last "Carbon Style" The pattern of the "K" is a "K" pattern, so it may seem cheap to those who are interested in the real thing.
Other items that would be helpful
The deciding factor in the purchase
It is discreet, functional, and inexpensive.
I was looking for such a product and was able to purchase it at just the right Timing.
【Included Parts:presence or absence】.
This is a Simple product with only one Plate of approximately 3mm thickness.
[ITEMS TO BUY TOGETHER
If you purchase Bolt of your favorite design or Aluminum Collaretc. of your favorite design at the same time, you may save on shipping charges.
If you own a Motorcycle in an area where theft is common. Bolt for anti-theft." It may also be a good idea to consider
Opinions and requests to Manufacturer.
We look forward to your continued development of affordable products and continued sales for many years to come.
View detail
I wanted to protect the License Plate as much as possible.
[How is it used?
The License Plate of SEROW250, which is used for mountain play, has been bent into a squishy shape due to frequent falls caused by the inexperience of the rider. "A little protection." I purchased this product because I thought it was a good idea.
I purchased a cheap iron Plating License Plate Holder made by KITACO from Webike and installed it on my SEROW225 WE, and it worked well above a certain level, so this time I decided to install an Anodized Blue License Plate Holder made by RCEngineerRing. I decided to try my hand at the License Plate Holder made by RCEngineerRing, which is dyed anodized blue.
How did you like it?
As I mentioned above, I purchased the Blue product to match my car's body color, and the Anodized treatment is very beautiful and a little less expensive than similar products made by other companies.
The rigidity of the Holder and the durability of Anodized are unknown at this point, but it seems to be reasonably rigid as I tested it when I installed it, and I am positive that I will be able to paint it if it fades quickly.
How did it compare to other products?
The outer frame of the License Plate is Large, which stands out for better or worse, and this is a matter of personal preference.
If you don't want the frame to stand out, Webike offers a wide variety of products with different designs to suit your taste.
[Points to note]
Anodized staining is the same "Blue" Even if it is labeled "Black," each company has a slightly different color, and colors other than black vary from company to company, so it may be best to check the actual product at a motorcycle accessory store.
There are no particular points to note on the functional aspect of the product itself. Design of Holder." When Anodized dye tints." Please examine the
Other items that would be helpful
The deciding factor in the purchase
Material:This is a relatively inexpensive license plate holder made of aluminum with anodized staining.
Well, I'm the one who can't improve my driving skills. Tints." Ya "Design" I understand that even if I care about something, I will soon be left in a mess due to repeated falls, but I wanted to make it beautiful at least for the first time.
【Included Parts:presence or absence】.
PlateQuantity:1pc. and Bolt&Nut for installationQuantity:2 Sets, Aluminum Collar instead of Washer is also available in Quantity:2pc. It comes with a set.
Frankly speaking, this price is a great value for the money with all this.
[ITEMS TO BUY TOGETHER
As mentioned above, all parts for installing the License Plate are included in the package, so there is nothing else to purchase.
If you own a Motorcycle in an area where theft is common. Bolt for anti-theft." It may also be a good idea to consider
Opinions and requests to Manufacturer.
I am considering purchasing a Repeat when the Plate I purchased this time falls apart, so please keep up the good work with Lineup for a long time to come.
View detail
Metallic feel is very elegant!
Installed on YB-1FOUR.
It prevents the License Plate from bending, and matches well with the Chrome plating Fender.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail