Reviews
![[WALLESS] Aluminum License Plate Base Plate](https://img.webike-cdn.net/catalogue/images/59796/wls-001_01_TS.jpg)
Effective for License Plate resonance countermeasures
I was going to have the License Plate of VANVAN200 reissued because the crack started from the edge of the Mounting Bolt seat and the crack has been growing since then. I decided to purchase this product as reinforcement. 。
View detail
Fits: Others Universal
Yo...
Installed on the License Plate of Mrs. Rebel250.
I have pushed and pulled this product with it installed before and it went gasketed, but it bent with the License Plate, so I think it has no strength at all.
but purchased and installed again lol
This product is a little larger than the License Plate, and the main points of this product are that it is lightweight and can be easily installed. (´∀`)
Incidentally, when using the included anti-vibration sponge, the gap between the license plate and the panel becomes too large and the panel floats.
Overall, I think it is a good product for dress-up purposes.
View detail
man who will not bend
I once had a crack on my moped license plate, and after consulting with a motorcycle shop, I was told that I could use a washer between the screw and the plate holder to prevent vibration. Since then, I have been buying and using PlateHolder for all types of vehicles.
DAYTONA's License Plate Holder comes in a variety of colors, so it was hard to decide. At first, I thought I would choose Gold, which is not seen very often. However, I thought that the yellow color Number would look too large, so I decided to go with black this time.
It is easy to install and the material is aluminum plate. The spacer is also more solid than shown in the photo. The PlateHolder gives the PlateHolder a high quality feel and a top ranking. It also protects the thin and bendable moped license plate.
Moped License Plates have different shapes depending on the municipality. The recently popular local moped numbers are often of a unique shape. Plate holders with raised edges cannot be installed. It is advisable to check the shape of the number before purchasing.
Basically, when you buy a new car, you also get a new License Plate. New plates look good on new cars, so I buy a new Plate Holder every time I buy a new car. I am planning to change the color of the Number to Pink in the near future, so I will buy a new one in a new color. It comes with Washer, but the price is not too expensive, so it is very helpful.
View detail
I like the color.
This is my first ReturnRider in 8 years, but I have been using DRC mono for a long time, so this is a Repeat purchase.
I love the texture and color.
However, you should be careful not to widen the claws on the bottom side, otherwise the Wound will get into the edge of the License Plate.
(I actually inserted it without expanding it, and when I removed it, it had a Wound in it…)
Currently I am using only the color Washer and Bolt because they interfere with the Fender Eliminator Kit that I installed separately.
View detail
License Plate is cool.
I am very pleased with the new License Plate and think it looks great. I think it is worth the price. View detail
Carbon peeks out while protecting the License Plate. "Tune." 。
[How is it used?
SEROW250 was originally used for mountain riding, but recently SEROW225WE has been used more frequently for mountain riding, and SEROW250 has become almost a street riding spec.
I was browsing Webike's product introductions to replace my flashy License Plate Holder with a more subdued product, when I found this product.
So-called "Carbon Style" It is a Holder with a pattern that is not a "Tune." The material is ABS plastic, and the price is low, so it is an exact product for my purpose and my wallet situation.
How was your experience with it?
The holder is not as strong as the Gold License Plate Holder, and is almost as large as the License Plate, so it is barely visible from the front side after installation.
Quantity:Pair (for Left and Right) or License Plate, but it is only glimpsed from the bottom of the License Plate, I don't want to put a prominent License Plate Holder on it." I think this product is just right for those who are interested in this kind of product.
Although it is a little less strong than the Gold series, it is strong enough to function as a license plate holder, and at this price, I think it is an attractive enough product.
How did it compare to other products?
As mentioned above, it is only slightly larger than the extra License Plate, so it is not noticeable. The type of Holder that can protect even the frame of the License Plate attached to the SEROW225WE that I use for mountain activities stands out, for better or worse. Intended Use." Ya Preference I think you can buy whichever you like.
It makes the License Plate harder to bend." and other functional aspects are not a problem for any product, so you can find a product with the Type you like at Webike.
[Points to note]
Material is Material:Because it is plastic, it can crack if handled roughly and may melt or deform in high-temperature environments.
the last "Carbon Style" The pattern of the "K" is a "K" pattern, so it may seem cheap to those who are interested in the real thing.
Other items that would be helpful
The deciding factor in the purchase
It is discreet, functional, and inexpensive.
I was looking for such a product and was able to purchase it at just the right Timing.
【Included Parts:presence or absence】.
This is a Simple product with only one Plate of approximately 3mm thickness.
[ITEMS TO BUY TOGETHER
If you purchase Bolt of your favorite design or Aluminum Collaretc. of your favorite design at the same time, you may save on shipping charges.
If you own a Motorcycle in an area where theft is common. Bolt for anti-theft." It may also be a good idea to consider
Opinions and requests to Manufacturer.
We look forward to your continued development of affordable products and continued sales for many years to come.
View detail
I wanted to protect the License Plate as much as possible.
[How is it used?
The License Plate of SEROW250, which is used for mountain play, has been bent into a squishy shape due to frequent falls caused by the inexperience of the rider. "A little protection." I purchased this product because I thought it was a good idea.
I purchased a cheap iron Plating License Plate Holder made by KITACO from Webike and installed it on my SEROW225 WE, and it worked well above a certain level, so this time I decided to install an Anodized Blue License Plate Holder made by RCEngineerRing. I decided to try my hand at the License Plate Holder made by RCEngineerRing, which is dyed anodized blue.
How did you like it?
As I mentioned above, I purchased the Blue product to match my car's body color, and the Anodized treatment is very beautiful and a little less expensive than similar products made by other companies.
The rigidity of the Holder and the durability of Anodized are unknown at this point, but it seems to be reasonably rigid as I tested it when I installed it, and I am positive that I will be able to paint it if it fades quickly.
How did it compare to other products?
The outer frame of the License Plate is Large, which stands out for better or worse, and this is a matter of personal preference.
If you don't want the frame to stand out, Webike offers a wide variety of products with different designs to suit your taste.
[Points to note]
Anodized staining is the same "Blue" Even if it is labeled "Black," each company has a slightly different color, and colors other than black vary from company to company, so it may be best to check the actual product at a motorcycle accessory store.
There are no particular points to note on the functional aspect of the product itself. Design of Holder." When Anodized dye tints." Please examine the
Other items that would be helpful
The deciding factor in the purchase
Material:This is a relatively inexpensive license plate holder made of aluminum with anodized staining.
Well, I'm the one who can't improve my driving skills. Tints." Ya "Design" I understand that even if I care about something, I will soon be left in a mess due to repeated falls, but I wanted to make it beautiful at least for the first time.
【Included Parts:presence or absence】.
PlateQuantity:1pc. and Bolt&Nut for installationQuantity:2 Sets, Aluminum Collar instead of Washer is also available in Quantity:2pc. It comes with a set.
Frankly speaking, this price is a great value for the money with all this.
[ITEMS TO BUY TOGETHER
As mentioned above, all parts for installing the License Plate are included in the package, so there is nothing else to purchase.
If you own a Motorcycle in an area where theft is common. Bolt for anti-theft." It may also be a good idea to consider
Opinions and requests to Manufacturer.
I am considering purchasing a Repeat when the Plate I purchased this time falls apart, so please keep up the good work with Lineup for a long time to come.
View detail
Metallic feel is very elegant!
Installed on YB-1FOUR.
It prevents the License Plate from bending, and matches well with the Chrome plating Fender.
View detail
To protect the license plate.
[How is it used?
I searched for a License Plate Holder on Webike to protect my SEROW225WE License Plate. I was looking for the cheapest product and came across KITACO's product.
How was your experience with it?
The appearance is that of steel with plating, so the Material:If you compare it with the products that are Anodized Treatment for each color in Aluminum. Cheapness." cannot be hidden.
However, the motive for purchasing License Plate protection that bends every time I go out to play in the mountains." Therefore, since they are going to be bent anyway, Cost is more important than texture.
How did it compare to other products?
As I said above. "Cheapish" The price is actually cheap, so there is nothing to be done about it.
Material of the same thickness, perhaps due to the material of steel:It is a little more rigid than the Aluminum product, and so far the License Plate has not bent.
[Points to note]
The product is made of steel with plating treatment, so it will eventually be rusted if scratched.
Even without Wound, Rust may be unavoidable depending on the environment, so it may be better to protect it with Wax or similar.
There is a possibility that you may get hurt if you handle it roughly with your bare hands. [Color] I sprayed ClearSpray.
Other items that would be helpful
The deciding factor in the purchase
Cheapness, that's what it's all about.
In my case. "the expendables" However, if you are looking for texture, Material:Aluminum and Material:I think you will have less post-purchase regret if you consider Carbon's other products.
【Included Parts:presence or absence】.
Only one Plate is available.
Simple, low price, just the right product for me.
[ITEMS TO BUY TOGETHER
The existing Bolt can be used to install the License Plate with no problem, but it may be a good idea to add an Aluminum Collar or CoolBolt (if you are in an area where theft is common, you may want to consider an anti-theft Bolt).
Opinions and requests to Manufacturer.
We look forward to a long-lasting Lineup for Cost-conscious Users.
View detail
Bolt part to Custom
[How is it used?
License Plate Bolt to Custom
Was the one you received as per Image?
Yes, it was exactly what I expected.
How was your experience with it?
Bolt section is now custom made.
[Points to note] It takes a little time to install.
How did it compare to other products?
No comparison, so no.
Other items that would be helpful
None
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
When installing on CT110 HUNTER CUB, it seems to be easier to loosen the Rear Reflector, though.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91947_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
For One point in the License Plate Department!
I purchased it as a one point accent for the license plate section, and as a result of installation, the license plate section looks tighter! View detail
Fits: Others Universal
It was a little too flashy.
I bought this for Number protection and dress-up.
I imagined that the License PlateBody would fit in the body, but it was not quite large enough, so it stuck out. I had to put the attached cushion on it because it floated.
The frame itself is a bit Large, so in the case of Gold, it was an unfortunate point that it would stand out too much.
I think it is an Exactly product for those who like to be flashy.
View detail
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
Simple but well-made License Plate Bolt
I bought it for Dress-up for One point.
The screws on the license plate are the same for all car models, so I think it will fit most large car models.
After several years of use, the color has not deteriorated and there are no bald spots.
Parenthesis has a simple structure with a slit design that is compatible with other PremiumZone products.
View detail
![PREMIUM ZONE License Plate HolderQuantity:Set [M6]](https://img.webike-cdn.net/catalogue/images/15903/91946_1_TS.jpg)
Fits: HONDA 400X, HONDA CB1000R, HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER FOUR SP, HONDA CB250R, HONDA CB650R, HONDA CB650R, HONDA CBR650R, HONDA CBR650R, HONDA NC750X, HONDA PCX125, SUZUKI GSX-R125, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX-S750, SUZUKI GSX250R, YAMAHA YZF-R25, HONDA CB125R
DAYTONA for peace of mind
Since I installed the Fender Eliminator Kit, I wanted to change the License Plate Bolt as well, so I bought it. I bought the blue color to match the color of the car body, but the anodized blue color is also shiny and matches well with the car body. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Thick and solid product
It is the same size as the Number, so it is not suitable for those who want to dress-up the outer frame of the Number, but I think it is an excellent choice for those who do not want to bend the Number. It is thick and the texture is not bad. View detail
Fits: Others Universal
License Plate Reinforcement
I was riding my CB1300SF and was rear-ended by a car and although I did not fall over, the License Plate was bent. I bought a Plate Stabilizer and installed it to avoid any more rear-end collisions! View detail
Special Material to prevent damage
This number base is a resin containing glass fibers, which is also used in handguns. It is the same class of material as that used in handguns used by the military, and is not likely to crack unless the vibration frequencies match.
The design is martial but the finish is excellent, not a single BALI.
The resin material is thick enough to prevent squeaking, and there is even a rubber bush on the lower part of the plate.
The color is Black only, so it may not be to your taste, but the texture is good, so it is an option.
This is an ideal product for those who want a shibu Number base.
View detail
The License Plate is bent, so it is reinforced with a License Plate Holder!
I was looking for an inexpensive License Plate Holder before the License Plate bent into a squishy mess, and I found KITACO's License Plate Holder!
I like it because of its simple design and good texture!
View detail
License Plate Protection
I purchased this to protect my License Plate and it fits my License Plate perfectly without any size problem. View detail
Fits: Others Universal
To prevent unexpected bending.
[How is it used?
It took some time to restore the LITTLE CUB that was given to us by hanghang, but we managed to get it into shape and acquired the numbers for public road driving.
Was the one you received as per Image?
It is not a type of holder that protrudes a large amount from the perimeter of the license plate, but a type that works quietly on the reverse side of the license plate, so it was exactly what I had imagined.
Was the installation difficult?
Bolt and Nut in 2Quantity:Set Loosen and remove the License Plate, insert this product into the NumberReverse side, and tighten the supplied bolt from the rear side with the nut.
This is a Custom that can be done by even beginners in Motorcycle maintenance.
How was your experience with it?
Quantity:Pair (for Left and Right) and the Holder protrudes just a little bit on the underside, but it looks great.
In my case, I purchased the black color, but I felt it was tasteless, so I put Carbon Style Decal on it. It is not noticeable at all, but it is enough to satisfy my self-satisfaction.
[Included Parts:were they on?
License PlateStabilizer (aluminum plate with cut-outs) Body and 2 quantities of Bolt and Nut for License Plate fixation.:Set, for preventing resonance caused by vibration? UrethaneTape is included in the package.
[Was there anything that disappointed you?
Personally, none at all.
If you want to make it stand out even more, there is also a lineup of types with edges, so please check out Webike's product introduction section for more details.
Other items that would be helpful
Point and hang of installation
The holes for fixing the bolt on the License Plate Stabilizer side are slightly larger and wider, so please adjust the holes to your liking when installing the number and bolt to the car body together with the number.
Installation with proper Torque management.
When installing in a vehicle with a lot of vibration, it may be safer to apply Screw lock agent to the nut on the back side or replace it with a Lock nutType nut.
[Availability and clarity of the Instruction Manual
I think a simple Installation Instruction Manual was included...sorry my memory is a bit fuzzy.
I think it is a top level product in terms of ease of understanding.
[Points to note]
As I mentioned above, it is about proper Torque management.
Install it securely so that it will not fall off while driving.
[ITEMS TO BUY TOGETHER
There is no shortage of basic installation with this product alone.
As mentioned above, consider using Screw lock agent or lock nut as a self-protection measure when used on a vehicle with a lot of vibration.
Opinions and requests to Manufacturer.
The abundance of trapezoidal and rectangular types and lineups is very helpful when making purchases.
View detail