Reviews
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail
poor in cost performance
Tank Pad was attached before it was scratched because of the large Tank surface.
I think it is well made and thick because it is OEM.
I don't think it would detract from the design of the vehicle.
It is difficult to put it on straight because of its wide surface.
Be careful not to stretch slowly from the edges, otherwise air can easily enter.
View detail
Tank capPad
The texture is good but the detailed workmanship is not good. Holes are misaligned. View detail
Easy dress-up
I put it on for dress-up and to reduce hand numbness etc. I could have used Universal Product for just the tank side, but I wanted the SIDE part closer to the frame, so I went with this product. The material is thick and cushiony, and the adhesive surface is super strong. We are planning to go to Long to see the effect of reducing fatigue. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank cap bolt
Low price and good looking. Easy to install. View detail
Fits: SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Installation with processing
Since this product is installed with modification, it cannot be mounted with a simple bolt. However, even with modification, the bolt holes are not perfectly aligned, so those who are concerned about clearance should not use the bolt holes. There are two places where the OEM speed nut is transplanted and fixed, but the holes obviously do not fit and the bolt does not pass through, so I would like you to inspect and make it right. (Lol) I know it's not what Large did, but it's a shame because it's a Brand I had high hopes for. View detail
Fits: HONDA VFR750, HONDA VFR800, HONDA VTR250, HONDA VTR1000 SP-1 RC51, HONDA NSR250R SE, HONDA NSR250R, HONDA NSR250 MC18 MC21, HONDA CBR250 MC19 MC22
cheap and has a bad finish
I bought ai-net fuel tank cap to replace the old cap that was damaged. The new ai-net cap is cheap and has a bad finish. The new tank cap is raised higher with the fuel tank. View detail
Mounted on EC250
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The Hose stuck in the Tank allows Gasoline to flow back into the HeadBike when it falls over.
In this case, grease around the Stem will drop, causing Rust and worsening Handling.
This cap is available in a lineup of different colors, and it is a good part with an easy customizable feel.
However, after two rides after installing it, it came off when I fell down somewhere or lost it.
I ended up buying a second one right away, also in tears.
View detail
Looks good and lightweight.
It looks great and is lightweight, but the Tank's mounting accuracy is not very good, so some machining kills are required.
Side covers in particular do not fit properly without machining long holes.
After Color:The unpainted condition has several small holes and the surface is not clean, but it can be covered depending on the skill of the painter.
Even without that, the Parenthesis in its installed state is excellent.
It is now half as light and rust is no longer a concern.
View detail
Tank Pad
The price is high because it is an OEM product. It is normal. View detail
Quality is better with Stomp Grip.
I had installed the Stomp Grip but the seat on the side cowl side was too small and didn't hit my knee area, so I left the Stomp Grip on the tank side as is and replaced it with the EasyGrip on the side cowl side. As other reviewers have said, the EasyGrip is a large size, and I am satisfied with its functionality, but the EasyGrip looks like it is cut out from a large Seat to fit the car model, but the StompGrip has no warts on the edges and is molded one by one, so the texture and appearance are parenthesis. The StompGrip has no warts on the edges and is molded one by one. It's a choice between functionality and appearance. View detail
Reliable EasyGrip
We used EasyGrip about 3-4 years ago when we switched from StompGrip.
Since then, EasyGrip has been my choice, and I personally think that EVOType has better gripping power than Stomp.
Recommended for people who drive on circuits and mountain passes, and for sports drivers.
View detail
I think the things are outstanding.
In my personal opinion, I enjoy how the shape changes from NORMAL because of the two-layer structure.
The upper rear part of the foot rises backward about 3cm to 5cm, and the upper rear part rises backward as well, making the foot look more like a racer from the side. The increased area also makes it easier to get a good knee grip.
Carbon eyes were selected for twill weave.
It's just beautiful. It's great to be able to still have a good looking sc59 that is getting old.
Installation is not so difficult, as it is just a matter of using the double-sided tape already installed on the back side of the product and then snapping it in place.
If you are looking for looks and ease of holding, this is the one to choose.
However, the delivery time is very long. It takes from six months to a year. Only those who can endure the long delivery time should purchase this product.
The company's efforts have made it one month earlier than scheduled, but five months is still a long time to wait.
View detail
Just for looks?
When I saw the product photo, I thought it was a Rubber quality product, but when I looked at it, it was a little thicker Sticker. The sticker is applied by spraying it with diluted neutral detergent, and there are no problems with air removal or positioning. View detail
Fits: YAMAHA YZF-R3, YAMAHA YZF-R25
Not an exact match.
The texture is good
I think the adhesion is also firm.
View detail
Quality is good, but accuracy is subtle.
The quality of the carbon itself is fine, but the accuracy of both SIDES is not so good. The tank cover itself is difficult to install, because it is made in the shape of the tank cover, and the gap is inevitably caused by the thickness of the double-sided tape. Well, I think every manufacturer has this kind of accuracy.
Tolerable.
View detail
Increases the sense of Hold.
Compared to OEM, the tank shape is raised so that the body can be held without moving too far forward when breaking.
The use of a tank pad will further reduce slippage and increase the hold feeling. It is especially recommended for those who run Circuit with GunGun.
View detail
Leaks.
Is it just my Motorcycle?
Fuel leaks if you roll or willy.
The Chinese one I used to wear on Yahoo!
Is the attached Hose Material not good enough?
View detail
I am generally satisfied, but I would like to have a larger size.
I like the affordable price and the Grip feel and have purchased several times now.
The size is one size, so depending on the vehicle, one piece may not be enough.
View detail
Fits: HONDA , HONDA CB500X, HONDA CBR500R, HONDA Rebel1100 DCT, HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CBR650R, HONDA CBR400R, HONDA CB650R, HONDA CB1300SUPER FOUR SP, HONDA CB1300SUPER FOUR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR, HONDA CB1000R, HONDA 400X, HONDA Rebel1100 T, HONDA Rebel1100, HONDA CBR650R, HONDA CB650R
Exclusive product and perfect for Size
The double-sided tape is in good condition and applies cleanly.
The new condition is clean, but I have a feeling that the soft urethane?material will discolor white after long-term use.
View detail