Motorcycle Fuel Tanks, Caps & Accessories Reviews

Filter

Write a review and get Webike Points!

Reviews

ODAX

21 Apr 2024

OBERON Fuel Filler Kit

Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-07, YAMAHA MT-25, YAMAHA MT-03, YAMAHA Tracer9GT, YAMAHA Tracer900, YAMAHA Tracer900GT, YAMAHA MT-09Tracer , YAMAHA XSR900, YAMAHA XSR700, YAMAHA FZ1/Fazer

Japanese Webike user

5/5

Very satisfactory product

The finish is satisfactory in terms of both texture and ease of use.
However, the gap between the tank and the cap is a little empty, so we have to be a little careful when washing the car in the rain or when washing the car, but there is no problem because water never enters the tank. View detail

Eazi-Grip

21 Apr 2024

CenterTank Pad Centre Tank Pads

Fits: Others

Japanese Webike user

5/5

Excellent Material

[How is it used?
I bought this CenterTank Pad to prevent scratches on the Tank.

I regretted that I bought it so early because I didn't put anything on it at first, so it was damaged at the Center just two months after delivery and the gloss was gone.

Was the one you received as per Image?
There is something needed for installation, so it can be attached easily.
Package is also Green type, so Kawasaki users may be pleased!

Was the installation difficult?
It is just like a regular Sticker because you just paste it.
But since it is a Center pad, it is useless unless it is attached to the Center, so it is better to Center out.
It might take that long. After that, there was no problem when I applied it while slowly releasing the air.

Universal Product, so it can be used for any type of car.

How was your experience with it?
It feels like a proper anti-scratch expectation.
Material is also cool and full of luxury.

At first I was going to use a GSX1300R HAYABUSA OEMCenter pad, but it's big in the middle. "GSX 1300 R HAYABUSA" I just wanted something thimble, and since I also use EasyGrip's Knee grip, I decided to go with this one, partly because I wanted to unify the two.

[Included Parts:were they on?
Sticker or Alcohol Tissue.
I find it very convenient because it has everything I need for pasting.

[Was there anything that disappointed you?
No, I don't!
Perfection
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer

I chose EasyGrip to avoid corroding the Paint with poor quality glue, which inevitably leads to sunburn and deterioration due to UV rays in inexpensive products that often ruin the texture. I believe this will never be a problem. View detail

Eazi-Grip

21 Apr 2024

Knee grip support TANK GRIP PERFOMANCE

Fits: SUZUKI GSXR1300R HAYABUSA

Japanese Webike user

5/5

I'm glad I bought it

[How is it used?
I purchased this product to prevent scratches after delivery, but the knee grip is more effective than the actual scratch protection.

I'm new to wearing a Knee grip myself, and I'm so pleased with the effect that I'm bummed after installing it.

Was the one you received as per Image?
First purchase of the famous EasyGrip
The delivery time was a little long, but I think it was worth the wait.

When I open a new one, it smells like Rubber from a shoe store, I like myself Large.
Material is soft and nice to the touch

How was your experience with it?
After attaching the grips, I tried riding the bike, and wow! The knee grips were great. I have always leaned forward, so it was hard for me to ride for a long time or to make a sudden break because all the weight of my body would be on my wrists. After attaching this product, my knees became the fulcrum and the weight on my wrists was alleviated, and my upper body felt lighter.

Also, even when cornering, the knees are firmly hooked, so you feel as if you are one with the vehicle, without slipping.

[Points to note]
When pasting, please be slow
If you do it in a hurry, you get a lot of air, which is not aesthetically pleasing.

How did it compare to other products?
I can't say I've used any other products.

Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer

My Motorcycle is pure White, [Color] I thought Clear would be the best, but EasyGrip's [Color] Clear is a bit with-color or yellowish, so it stands out even if you put it on a normal white motorcycle. So, I think Black would be more suitable for White Motorcycle. View detail

DAYTONA

12 Apr 2024

Fuel Cap Pad (Potting Type) KAWASAKI 3

Fits: KAWASAKI NINJA400 (2014-), KAWASAKI NINJA250R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR

Japanese Webike user

5/5

Scratch protection.

Whenever I refueled my gasoline tank, the keys and key holders seemed to get scratched, so I stuck them on the tank to prevent scratches as well as the tank.
Is it thick? It became a little difficult to close, but I am generally satisfied. View detail

ACERBIS

20 Mar 2024

BigFuel tank

Fits: HONDA CRF300L, HONDA CRF250L

Japanese Webike user

5/5

That was a good purchase

I replaced it with Big tank because it was hard to Ladder on the forest road.
The price is quite expensive, but I don't have to use Gasoline many times a day anymore.

I wanted a Skeleton, so I went with Natural without hesitation.

The lower front side of the Tank is directly above the Engine, so I put an insulated Seat on it for heat protection. I used Seat from Daytona and Tape from Posh.
Because of the complicated shape of the lower part of the Tank, the Posh one was easier to apply, and I should have just used this one.
After putting on the front and Right Side of the Pump under the Tank, it became too much of a hassle and I had to stop in the middle of the process. I'm going to try it in the summer and see how much heat will be generated in the lower part of the tank, and if necessary, I'm going to add more.

Since the tank is blocked up to the heat venting hole of the Radiator on the RightSide cowl, I carefully applied insulation tape to this area.
I think it's a bit much to go this far.:Pair (for Left and Right) It would be nice if only the Right Side could be asymmetrical so that heat can escape.

The width of the front side of the tank did not match with the body of the vehicle, so we inserted two washers on each side for a total of four washers, and the width was just right.
For the back side Screw, it was written to use the OEM Washer, but since the Washer could not be removed from the OEM Screw, it seemed that a Washer would be required here as well.

The side cowl was installed with the screw holes slightly out of alignment, but the left side went on without difficulty.
The Right Side is slightly obstructed by the Radiator guard, so I cut a screw hole in the Cowl to make it fit.

The hose connecting the Tank to the Canister is specified to be connected to the Cap with a One-Way Valve in between.
However, the One-Way Valve is oriented from the canister to the tank, so the gasoline in the tank vaporizes and does not enter the canister even if the pressure is increased.
This is not good for the Tank, and it is a hassle to remove the hose from the cap every time I fill up the Gasoline, so I added a Zita Uni-flow cap. This will make the air pressure inside the Tank Large and looks good for the Tank.
The Hose going to the Canister was put in a Screw coated with Liquid Gasket and clamped with a Hose clamp.

The Nempon Gasket and Dust Seal were replaced with new ones, and the gold surface of the tank where the seals meet was coated with engine oil, as Honda's service manual specifies that oil should be coated on this part of the OEM tank. There were traces of oil on this part of the OEM tank.
I think this is so that when the gasket is compressed and stretched thin, it does not stick and distort strangely.
No one seems to be applying Oil here, even on the Net, but since the Manufacturer specifies it, I think it is better to apply it.
The torque of the Nenpon mounting screw is 12Nm, and it was properly tightened with a torque wrench.

It seems a lot lighter with almost no Gasoline in it, which is understandable since it is the upper part of Motorcycle.
On the other hand, it feels much heavier when set to full tan, and you may need to adjust Spring and Shock.

I plan to apply Porlmate frequently to prevent the outside of the tank from getting crusty.

Now I only need to refuel once a day, so I'm glad I made the change, even though it was expensive. View detail

KAWASAKI

11 Mar 2024

Tank Pad

Fits: KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z650, KAWASAKI Ninja 1000SX, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z650, KAWASAKI VERSYS 1000 SE

skooby

5/5

Genuine Kawasaski Tank Pad for Ninja 650

This was purchased for the Ninja 650 to help protect the fuel tank from scuffs. This does happen with the leathers zip section so always best to help stop that in the first place. The correct part was not hard to find, I just used the search facility on Webike and narrowed down the search to OEM Kawasaki and fuel tank protection. There was a few to choose from but only this one was specifically Kawasaki branded for this model. The cost was pretty good for such a good tank protector and along with a few other items in my basket, I got them all shipped together to save on a bit of shipping cost. I generally use EMS these days as they just get the job done. I almost always get my order delivered within a week and more so in 5 days from shipping Webike warehouse. This was no exception, the order arrived in 5 days as expected. The outer box was sealed along each side and the inner was well padded out. With the tank pad being flat and needing to stay that way during transit, Webike had this taped to a large piece of cardboard to keep them safe. This worked a treat. The tank pad itself was packaged in a nice Kawasaki standard packet. They are flexible but do have some structure to them. They were slightly on the thin side but when you think about it, if they were much thicker, you would struggle to get it placed where you need it anyway. I am very pleased with the purchase and look forward to trying them out on the road as they also supposed to give a little grip to the tank too. Added bonus. Thanks Webike View detail