Reviews
To commemorate a reservation to purchase a vehicle
I have reserved a 2024 CB650RECLutch.
Since I have some time left before the delivery of the car, I would like to prepare a few Option Parts that I can install by myself.
Back at home, I hurriedly went to webike to register My Motorcycle and search for Parts.
As a start, I found and purchased the OEMTank Pad.
OEMPartsSale was being held and I was able to purchase it at a lower price than the Dealer.
The product was in stock and arrived about 2 days after ordering.
The actual product proved to be a solid product, just like OEMParts.
The CB's Logo is also reliable.
However, I think that a slightly larger size would be more effective in preventing tank wounds.
View detail
Purchased for a Circuit run.
I bought Plain Weave Carbon, the mold with Tank is also good as it fits Exactly.
Less movement of the hips and lower back in Circuit driving and easier in Breaking.
Almost all of my Circuit buddies are installing them!
View detail
Cool?
For XSR (For SEA BASS GSX) I bought it because the color was Red and the design was good for Parenthesis. I tried to put it on anyway, and it went on surprisingly well. However, the two edges on both ends are angled, so they might come off. But I was satisfied with it in my own way, so I am glad. View detail
I'm glad it arrived on the promised date.
It arrived well packaged and intact on the promised date, but the ending was a bit disappointing.
There are places that look broken...
However, it was easy to install and I think it is a very satisfactory product if you are a little careful.
You will be able to see my bike change a lot in just a short amount of time...
I know that the knee grip is better thanks to the shape of the tank cover.
If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning.
-------------------------------------------------- -------- It arrived well packaged and intact on the promised date, but the ending was a bit disappointing. There are places that look broken... However, it was easy to install and I think it is a very satisfactory product if you are a little careful. You will be able to see my bike change a lot in just a short amount of time... I know that the knee grip is better thanks to the shape of the tank cover. If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning. Powered by Google Translator
View detail
We will prepare all the necessary parts before delivery.
I have reserved a 2024 HondaCB650RECLutch.
We are looking for Option Parts for delivery of the car, which is still undecided.
With the Points I have saved up to now due, I decided to purchase the Tank Pad I needed first.
I found the OEMTank Pad on webike's vehicle search and bought it immediately.
It was in stock and delivered the next morning.
Since it is OEMParts, I don't have to worry about quality, and I am happy to be able to buy at a discount with Sale Discount and Points.
I don't have the vehicle yet, but I think the size is a little small.
View detail
CLEVERWOLF Tank protector 2019mod. 2BL-SC54
2019 2BL-SC54 I installed it on a CB1300SB and it was Exactly in Tank shape. View detail
I consider it an ornament.
Knee grip does not match the knee position well.
Nonsense as scratch prevention.
Looks nice, good Accent on the Tank.
I bought it cheap and knowingly dared to buy it, so I have no complaints.
View detail
Tank Pad
Satisfactory, but not great value for money. View detail
scratch-resistant
It was put up to prevent Tank from being scratched. View detail
For Normal tank installation
Used on a 2000 XL883XL1200C SPORTSTER 1200 which was a Custom vehicle and the Tank had been replaced.Bolt&Nut and thankfulQuantity to be fixed when converting back to the NORMAL 3.3 GallonFuel Tank.:It was a Set. The length is right, but the fit is not quite right, as it seems to use Universal Product such as Rubber packing. However, I am satisfied with it because it fulfills the minimum function and it was easier than buying from Rose. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
Knee grip is easy!
It was installed with only Circuit use in mind.
It's easier to knee grip.
It looks good.
View detail
Easier Knee grip
This will be a reReview.
Immediately after delivery, only the side cover was attached, but later the tank side was also attached because the legs hit the tank side when the vehicle body is supported by the outer legs with the ass shifted, such as when driving on a mountain pass.
The positioning was done without any particular instruction manual, and the position of the legs was determined by straddling the tank, making sure not to miss the point where the legs hit the tank, and fine-tuning the position so that the line of the tank would be consistent with the line of the tank.
As with the Side cover section, when attaching, peel off the backing paper gradually to prevent air bubbles from entering, and apply it from the center outward in a way that releases air.
Although I am rather clumsy, I think I was able to apply it reasonably neatly.
As a result of driving on the pass, the Tank was well supported during Cornering and had the expected effect.
Especially in the forward leaning posture of SS, it is somewhat easier to support the upper body by having a good knee grip.
As I wrote in my last Review, [Color] Even though it is called Clear, I am a little dissatisfied with the Cream coloring.
A little more transparency would be nice without destroying the design of the car body.
View detail
Fits: HONDA VFR800X, HONDA VFR800F, HONDA VFR1200X, HONDA VFR1200F, HONDA CBR900RR, HONDA CBR600RR, HONDA CBR600F, HONDA CBR400R, HONDA CBR1000RR, HONDA CB750, HONDA CB400X, HONDA CB400SF, HONDA CB400SB, HONDA CB400F, HONDA CB1300SF, HONDA CB1300SB, HONDA CB1000SF, HONDA CB500X, HONDA CBR500R, HONDA VTR1000F
sense of unity
The last time I bought and installed the same Black color, I thought it would be more consistent with the same color, so I decided to buy a Blue color before the Point expired.
I like the texture but the Design is so-so.
View detail
The dignified appearance is atmospheric.
I use the IMSBig tank's OEM fuel cap, which does not have an arrowhead retaining mechanism, so no matter how hard I push it in, it comes off after 30 minutes due to the reaction force of the hose. The adhesive strength of the Aron Alpha is definitely ??????????. I like the way it stands up to the Chocolate. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
Fits: HONDA CB1000R, HONDA CB1300S, HONDA CBR650F, HONDA CRF1000, HONDA CRF1100, HONDA CRF250RLAC, HONDA GROM125G, HONDA CBR250RR, HONDA CB400SF, HONDA CBR650R
To PetitCustom
I think it is good because it looks different.
It would be better if it were cheaper.
View detail
Fits: BMW S1000R, BMW S1000RR, BMW M1000RR
Tank Pad
I am very satisfied with the texture this time.
I had a good business transaction with Large.
View detail
To prevent scratches on Tank
I bought this to prevent scratches to the Tank as it is SS.
It is not limited to this product, but it is rather difficult to make sure that the center is exactly in the center when applying.
The adhesion is neither too strong nor too weak, and I think there is a good balance between strength that does not seem to peel off on its own and weakness that does not damage the paint when peeling it off.
The size is a little larger than the cheap ones from other companies, and the cover range is wider. The texture is glossy and gives a sense of high quality, but the durability against sunlight is yet to be seen.
View detail
Required Items for SS
I chose this well-known product because there are not many other SC77 exclusive products available. The shape was Exactly to the Coloring and Shape of the Tank.
The installation itself is easy, but you need to be reasonably careful to apply it without air bubbles. I don't care much about it, so it took me about 10 minutes to apply it. The surface is smooth, so air bubbles don't bother me too much.
I accidentally applied it right after coating and it came off. However, I was able to cleanly peel off the adhesive tape and reapply it with a 3M double-sided tape that I bought separately. Since the product originally came with 3M, I did not feel any discomfort and it was finished beautifully.
View detail