Reviews
Ligh Tech tail tidy
The quality of the components are excellent. Fit is also great, when you figure out how to do it! Zero instructions and resorted to YouTube tutorial from a different manufacturer. The hardest part was actually dismounting the OEM number plate holder. You need to cut the number plate light wire and reroute it. After that it was straight forward. View detail
Fits: KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650, KAWASAKI W650
Nice chrome parts
It had a shorter tail than the original and a Lukatsu tail brake light, so it had a sense of unity, and it was nice to have all the additional parts to attach a license plate. View detail
Genuine Pyramid Plastics Enduro Fender for 2020 MT07
A customer wanted to get an extender for their MT07 to help stop water flick from the front wheel. Having not used one of these before on any bike, I asked the customer what they preferred. They chose this one from Pyramid Plastic. Good choice from doing my own research. The fender extender was not hard to find once you put your bike details in the website and the options appear. The extender was not overly expensive and added to a few other small parts in my order, I had them all shipped via EMS. I do have more than one item per order as this does cut back on the shipping cost somewhat. The order arrived in 5 days from being shipped and was well packaged and in 100% perfect condition. The fender extender came in the Pyramid Plastic sealed packet and was wrapped in bubble wrap from Webike warehouse to keep it safe. You do have the option of using the stick pads for this fitment or better yet, just drill the fender and attach for a more secure fit. This was the route we went. The extender is made of and ABS plastic as far as I can tell and the fitment of this is absolutely spot on. The quality of the part is excellent. A nice matte finsih which does go very well with the bike anyway too. I did think there may be a slight gap once test fitting but there was no gap at all. Took a little over an hour to do the job right but the result is really good. View detail
Easy dress-up
[How is it used?
I wanted to change the look of the SUPER CUB110 (JA59) a bit, and also to have an anti-agitation effect.
Was the one you received as per Image?
Nothing of particular concern.
Was the installation difficult?
You will need a #3 Driver and a 10mm Wrench, nothing too difficult as you just need to remove the License Plate and install them together.
How was your experience with it?
It looks a bit Wilde. I'm not sure how effective it is in preventing agitation (partly because I didn't get something so blatant to begin with). Well, it makes it look more like an Off-road Motorcycle, which is better than nothing.
[Included Parts:were they on?
Nothing in particular, just Body.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Since the material is Rubber, I don't think I need to worry about it, but I thought it might hit the Fender that comes with the Motorcycle from the beginning, so I put Urethane Seat on it (2nd photo).
View detail
Price suitable
The screw holes were accurate and there are no problems with installation or appearance. View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
After much waiting, it finally arrived!
Cool! I'm glad I put it on! ♪ (??????) ♪ View detail
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
I'm satisfied
PMC-made z2TypeTailBracket Kit (sold separately)
Purchase includes installation of z2Tail
Blinker mounting position is also better than OEM.
It can be installed in the front, giving it the feel of an old car.
Enjoying OEM for a while
I was thinking of changing to z2Tail if I wanted to change my mind.
I think
View detail
As a light Fender
Purchased as a lightweight for Fender.
There is a different MODEL of the same ACERBIS, but this one separates the front and back Fenders.
I also bought it with the expectation that it would have a cooling effect since it can send VANVAN running air to the Radiator as it is, since it is shaped to have a hole in the middle when used only with the front Fender.
As a result, handling is lighter and we have no complaints about cooling.
In addition, since a back fender would have to be attached to the car if it is to be driven on dirt roads, please consider this as a proposal for use by Maine city drivers or those who can drive only on paved roads.
View detail
It's a great product.
It's a great product.
It is very easy to assemble, and it is sturdy enough that there is no risk of it falling off and being lost while driving.
The design is much better than other products, so it goes very naturally with existing car body parts.
I was worried after ordering, but I am very satisfied. ----------------------------------------- ----------------- It's a great product. It is very easy to assemble, and it is sturdy enough that there is no fear of it falling off and being lost while driving. The design is much better than other products, so it goes very naturally with existing car body parts. I was worried after ordering, but I am very satisfied. Powered by Google Translator
View detail
It is a good item
I think it is a very good product, simple and easy to install.
It looks better
View detail
Good service.
Fast delivery, well packaged, goods received in good condition. Genuine product, correct description. No additional costs arise. -------------------------------------------------- -------- Fast delivery, well packaged, goods received in good condition. Genuine product, correct description. No additional costs arise. Powered by Google Translator View detail
Fits: TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH Daytona675, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE R, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE Rx, TRIUMPH STREET TRIPLE RS
Genuine R&G Tail Tidy (Fender Eliminator) for Triumph Street Triple R 2016
As with most manufacturers, they put massive fender eliminators on their bikes from factory. Come on, Triumph, it's just too long. It was decided to get a smaller and more functional eliminator and one we went for was the R&G branded one as this would match up nicely with the colour scheme of the bike. Never used a fender eliminator from anyone else now except R&G. They just do them well. I found the part by coincidence really whilst browsing through Webike R&G section. This looked a nice small and neat package so went for it anyway. This was added to my basket and order placed along with some other parts to keep the shipping low and spread out for the whole order. All arrived in 5 days from Japan to the UK. Yes, I suppose I could buy from R&G in the UK but there is relatively no price difference anyway plus, I already had items I wanted to order from Webike anyway. The eliminator or tail tidy as we call them here in the UK was packaged in a R&G box and then Webike packed all my other items in the outer box. Filled with bubble wrap, nothing could get damaged in transit. The tail tidy is a really good looking piece of kit. The paint is smooth and even and there are no sharp sections to catch you out. It is precision made and everything fitted together really easily. It comes with everything you would need for it to be legal on UK roads including the number plate light. The spacing for the indicators is perfect once everything was fitted. Finished in no time, just a couple of connectors and away you go. The harder part was putting everything back together. Very pleased with how the bike looks now with it being so much smaller. Thanks Webike. View detail
Fits: KAWASAKI ZEPHYR400χ
BaGOOSE integrated Fender Eliminator Kit installed
It fits perfectly and is easy to install. It is very good to have a wider cargo space and to be able to load tools, etc.
Clearance of Rear tire and Fender will be somewhat less.
It takes a little care when going over steps.
I'm glad I put it on.
View detail
I was so happy that it arrived at the right time.
I'm so glad it arrived on the exact date.
The product was also perfectly packaged and in good condition, so it was flawless.
I would like to recommend it because I was very satisfied with the time I spent waiting.
If you're bored with your bike, it's worth investing in.
I ordered several products, but this was the easiest to install and the best quality.
There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. -------------------------------------------------- -------- I'm so glad it arrived on the exact date. The product was also perfectly packaged and in good condition, so it was flawless. I would like to recommend it because I was very satisfied with the time I spent waiting. If you're bored with your bike, it's worth investing in. I ordered several products, but this was the easiest to install and the best quality. There were no cracks in the carbon, and even the bolt washers were carefully taken care of, so it was very easy to assemble. Powered by Google Translator
View detail
in line with the price
I am thankful that it is much cheaper than OEM Product.
It is also nice to know that the body can be any color since it is Carbon Style.
With JC61, if I wanted to use the collar that came with the OEM, I had to use a drill to widen the hole.
If you use Bolt without collar, it may not be necessary to modify it, but I am afraid that it may crack.
For people who prioritize cost performance anyway.
View detail
Fits: SYM MMBCU, YAMAHA X-FORCE, YAMAHA FORCE 2.0, SYM DRG
Front Fender feels longer and is replaced.
The product feels less durable than OEM.
Just the right length of Fender that I was interested in.
Self-satisfaction
View detail
Minimalist
This plate holder is really small and light. The cut-out monkey is very beautiful, I don't want to put my license plate on it! LED lighting is efficient. In France the plates are quite large and therefore hide the reflector and the sticker logo. Installation is quite simple. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
CarbonLong rear fender
No problems with installation, no distortion.
It is a Long Type, so it can play the role of a Fender.
Large Satisfied!
View detail