Reviews
Fits: HONDA CB1300 SBSP, HONDA CB1300 SF, HONDA CB1300 SB, HONDA CB1300 SFSP
Product
Too badly shaped, too expensive and too disappointing, Chain rubs on Chain Cover and is unusable, Rear tire is so badly shaped that it seems to roll in, View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
it's good
I am driving a zx14r and the product is very good. Obviously, Weba deals with good products. Thank you so much for the fast delivery and friendly advice. I buy it all the time, but I'm happy every time I buy it. There are other things, so I'm always surfing. ------------------------------------------------------------ -------- I'm riding a ZX14R car and the product is so good. Definitely Wiba handles good products. Thank you very much for your fast delivery and friendly consultation. I always buy it, but I am happy every time I buy it. There are many other things, so I'm always writing. Powered by Google Translator View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Dry carbon！
This is the first time I have installed a product made of Dry Carbon, and it is much stronger than Wet Carbon.
It is also a very high quality and satisfying product. The price is also very expensive.
Is it about the same as OEM in terms of performance?
View detail
Fits: HONDA CB1300 SFSP, HONDA CB1300 SF, HONDA CB1300 SB, HONDA CB1300 SBSP
Very good☆
I installed this on a CB1300SB SPMODEL 2018.
I was looking for a Mudguard for the suspension (especially the rear suspension) and I like Carbon, so I found this one.
There was no Review, so I had to sacrifice myself. (Lol)
I got the Semi-grossType and it's like a matte finish, very tight on the suspension!
If I remember how effective it is, I'd like to REVIEW it again.
The manual says to remove the Rear suspension on the Left, but I was able to install it normally without removing it.
To install, simply remove the two bolts from the Left Side Chain case, replace it with the Chain case, tighten the OEM bolts, and then secure with the three Tie Wraps provided.
It took about 10 minutes.
Neck on the pricey side, but I have no complaints about the quality.
If you are on a budget, buy it.
The only thing that bothered me was the length of the included Tie Wrap (300mm) for fixing.
I try not to involve unnecessary Cable, and it is like Limit somehow.
If possible, I'd like to add something longer.
View detail
as one would expect
Depending on your taste, the quality & Design is nice.
The NEXRAY itself is well packaged, so I'm happy with the Large variant.
The photos of Semi-gross and Smoked black are mixed, so you need to make sure you get the right one.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Dry carbon reflection and threatening lightness w
[How is it used?
In Use. About 4 years have passed since it was installed.
Was the one you received as per Image?
I chose the Semi-gross and it has a more textured look than the Image.
Was the installation difficult?
There is a lot of space even with the STAND upright, so it was easier to work than with the Jack.
It is fitting, but the product of this Brand as usual has high accuracy, and the place where there is no processing such as expanding the mounting hole or bending the body is excellent. Therefore, it was not troubled by installation.
How was your experience with it?
If you want to run in the rain in NORMAL condition, the inside of the Fender will be sludge and the suspension will be dirty. After I put this on, it is much better and the area that becomes sludge is only around the back end of the Fender and the back of Number.
[Included Parts:were they on?
Brand NameSticker
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Point and hang of installation:I forgot to take a picture, but I put a 5mm Epto Seal on the Rear Fender as a buffer material to protect the surface of the part that contacts the Swing Arm.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z1000 (water-cooled)
I think the review is good enough personally.
I used to ride the zzr 1400 before, but at that time NEXRA CARBON DRY was wearing back and forth. I also liked the shape very much. I switched to Ninja 1000 of 17 years this time in June and compared the Fender of another company Manufacturer, but compared it, I made a NERAY similar to the arrowhead still. Since the year of the mounted vehicle is a representation for H16 year to date, I purchased it because it was OK as a result of asking WEBIKE for installation confirmation. It does not matter if you compare it with NORMAL even after installation. Arrow cabon is good. View detail
Fits: HONDA CB1300 SB, HONDA CB1300 SF, HONDA CB1300 ST
How to change Image
I tried comparing various Carbon fender, but I think that it is a very good product with both texture. Ba LePera There is no feeling, making is solid, but the accuracy of the mounting hole was not good, but I think the whole Balance is good. But I think that it is better to lower a little more because the price is high. View detail
Fender effect UP than STD Shape
NORMAL's R1 Fender is small enough to say this, but it is much bigger than that, you can considerably reduce hitting a Rear suspension by winding a Small stone etc, and the function as Fender is I'm satisfied with the rise to the Large width.
The surface finish and the weave of Carbon are neat and the appearance satisfaction after installation is also high.
However, although it is common to these exterior parts, since the mounting holes were slightly misaligned, it became mounting while correcting with File.
View detail
Fits: SUZUKI HAYABUSA, SUZUKI GSX1300R, SUZUKI GSX1300R
CARBON DRYCarbon Dry Rear Fen
Production to order I guess it will not work, but it takes delivery anyway. Installation is easy, but product accuracy was not satisfactory. It is a pity that I am satisfied with buying another NEXRAY product. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
Very accurate.
Material : Although it is relatively expensive among Carbon 's Rear Fender, I think that the satisfaction level when installing is incomplete.
It is effective and it is good for protection to Rear suspension.
There is only Dry carbon, it's amazingly light.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R, KAWASAKI ZX-14R
a Webike Monitor -- truly -- Carbon! messy -- it is light. It is pleasure although not attached yet.
a Webike Monitor
-- truly -- Carbon! messy -- it is light.
It is pleasure although not attached yet.
View detail
Fits: HONDA CB1300 SB, HONDA CB1300 SF, HONDA CB1300 ST
They were the goods which he wanted from before! It is very light and appearance and the engine performance are the highest! It is recommended although it is expensive!!
They were the goods which he wanted from before! It is very light and appearance and the engine performance are the highest! It is recommended although it is expensive!! View detail