Reviews
Fits: HONDA CB500R, HONDA CB500F, HONDA CB400R, HONDA CB500X, HONDA CB400X
No problems
I bought this fender for 400X because it does not have a rear inner fender. Since I have installed it since new, I can't compare with the condition without it, but I think it prevents dirt around the rear suspension (although it doesn't prevent it completely).
The Chain section does not EXACTLY match the Chain line, and when pressed with the finger, it touches the Chain, but it has never interfered with the Chain by shaking while running (15,000km).
There is a flat area on the front side of the Tire that collects fine sand and gravel, but this is only due to the structure.
Installation can be done easily by yourself, and even a novice mechanic should have no problem, but do not forget to check the tightness periodically as it is around the driving parts (although I never had it loose).
View detail
It is not a pontoon.
It is held in place by 4 hex screws, but it is not a simple screw-in, and the screw holes on the Fender side need to be widened.
It looks Cool.
View detail
Compliance with Laws and Regulations
Installed on a last model CB400SF. (Molds after 2019)
Legal restrictions such as the angle of the Number are strictly enforced depending on the year and the time of first year registration.
This product is sturdy enough to comply with vehicle inspectionsLarge because it is compliant with angles and other requirements.
However, we have been told that some DREAM stores may uniformly consider Motorcycles of the regulated year as Fender EliminatorNG,
In the meantime, I decided to keep the Normal fender as well.
I did the work by myself and was able to complete the work without hesitation due to the detailed Instruction Manual. 8mmSocket, 10mmSocket, 3-4-5mm Hexagonal, 10mmSpanner, Radio pliers, thin Slotted screwdriver
The keyhole for the SeatOpening is different from that of other Fender Eliminator models. (Prayer is all we can do now.) …
It generally took about an hour.
Design and finish,
There is no Japanese Vehicle Inspection Correspondence for the latest regulations other than this one, so there was no choice. I did get the Refreshing, but I give it a 3 star rating.
Ideally, I would like it to be a little higher, further back, and angled. I don't have a choice.
The accuracy of each Part is high, and the Laser marking in Small is just right and gives a sense of ownership.
You will also want to change the Blinker.
View detail
ACERBISFENDER
I was worried about the fitting with the light cowl on my XT250X, but it fits well.
The overall length is not much different from the OEM Product, so it has been extended backward, but there is no contact with the Frame.
View detail
Now you have the ideal Style!
I have been an Up Fender guy since my old ST50, so when I found out about this product, I pre-ordered it even before it was released and bought it.
The instruction manual says to prepare OEM parts for the bolt that holds the Fork Guard separately, but I had no problem with the DAX Fender bolt. However, I had no problem using the same bolt that holds the DAX Fender. I was able to install it even as an amateur, but the instruction manual is written on two A4 sheets of WhiteBlack paper and contains only one quantity of parts.:It is a little bit difficult to understand because it is explained with more than 5pcs. pictures. when I use KIJIMA's ForkEmblem together, there is a space to move Horn to the rear, but the length of Wiring of Horn is not enough. The female terminal is not L-Type, so it is not good. I will think about it a little because the Horn Relocation Kit for MONKEY125 from Emon seems to be available.
The Styling is Large compared to the OEM's wild Plastic, and the increased Clearance of the Fender and Tire makes me fantasize about the next Custom if I can make it a block tie ya ….
View detail
Rear Fender is good to have
After riding on a wet road, the hem of my Pants got dirty, so I put on the Rear Fender. It was easy to install, but when I loosened the ParaLever Bolt (Torque T50), I was worried that I might lick the Torque due to the tightening mechanism (the feeling in my hand was like I was going to lick it). (The feel of the bolt in my hand was like I was going to lick it.)
The bracket is solid for its cantilevered design, but the gap between the bracket and the fender can cause interference and chattering noise, so we recommend using padding before installation to prevent chattering.
As a result, the dirt countermeasure is effective.
View detail
Fits: SUZUKI HAYABUSA
When it comes to Fender Eliminator, it is Active!
There are various Fender Eliminators sold by various companies, but Active's Fender Eliminator is well made and the material is thick enough. The price is not cheap, but not expensive either. It's a sure thing. View detail
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
Need to be a little creative with Screwdome.
I bought it because there were few other options and I thought it would be better to buy it than to use it by trial and error and have more unnecessary parts.
The bracket for the Right Side is included, but when installed as per the screw holes, the pressure applied to the Fender feels unreasonable, so the existing holes in the bracket need to be widened with a drill or newly drilled to shift the fixing position with the Swing Arm.
Since the two holes on the Fender side do not match at the same time, only one hole was used and the unused hole was filled with black SiliconPate. However, it only takes 20 minutes to adjust the holes on the mounting bracket.
Item number as for FZS600 07214." When 07227. but if it is FZ400 compatible, 5DM series (Fazer 600 1998-2001) of 07214." becomes. 07227. is a 5RT system.
View detail
The construction is neither good nor bad, but not overpriced.
The difficulty level of installation is fair, the quality is neither good nor bad, and the price is a little high for the content.
The first step is to remove the OEMFender, but the Instruction Manual is wrong from the very first step.
It says two Bolt, but I have to remove four… I can tell when I see it, as you can see in the picture.
Assembly after removal is as simple as looking at the Parts.
I would have liked the shape and overhang of the License Plate Light to be a little more manageable.
Incidentally, the compatibility with KIJIMA's LED Blinker is subtle.
As you can see in PlateBase, the Small Type-ized Blinker seems to be quite hidden.
It may be necessary to shift the Number down or overhang the Blinker at the time of inspection.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
You can also substitute OEMBracket.
The OEMBracket broke unintentionally and went into Reflector" Les" status.
Although it was difficult to obtain an OEMBracket, Moto Crazy's parts can be substituted for the OEM.
Thanks.
Installation can be done using the Rear Fender intermediate bolt.
The Reflector itself was prepared by OEM, but was repaired inexpensively.
I think it is because it is pointing downward rather than comfortably level, but that would be a judgment call for the inspector in charge.
View detail
Stylish finish
I have purchased Active's Fender Eliminator Kit for every car model so far, so I chose this one again.
Installation requires touching Blinker's Wiring, so if you want to install it yourself, you will need to have at least a minimal knowledge of this area.
The product itself is solid and I have no complaints about its accuracy.
The only thing I would say is that Reflector is a security component and should be included in the package.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
StrikerRear Fender
It was exactly what I expected! View detail
Depending on the individual, it is an expensive and inferior product!
The product was too shoddy for the high price and inconvenienced Shop who did the installation work.
The tip of the Hugger hit the tire and could not be installed without machining the bolt hole,
It is an amateur and very difficult task.
Depending on the individual, the product is terrible!
View detail
Well worth the price!
I purchased the OEM inner fender because it is short and the Seat back and Rear suspension are very dirty.
If it is long enough, it doesn't have to be Carbon, but even if it is not Carbon, it is quite expensive, so I decided to go with Carbon.
Replacement is easy, but the push rivet screw on the back of the swing arm must be removed carefully because it is reusable. Push the middle part. It is possible to replace the Swing Arm without removing the Tire.
I drove a little on a wet road, Inner fender effect Large.
It was a good purchase and I thought Parenthesis looked great when I put it on.
View detail
Yoshimura fender eliminator kit
Item landed.packing was professionally done.item is as described correctly.yet to fix.my third order and 6 item overall from webike.highly recommend to shop here.thank you webike.very satisfied with the service.keep it up and more order to come. View detail
It can be installed without modification on the '24 MODEL.
Although there is currently no support for the 24-model ZX-6R, the model numbers of the OEM RearFender and License lamp are the same as the 23-model, there were people who installed the LED Blinker on the day of release on SNS, and even when the Z900 was not compatible with the LED Blinker, there was no problem installing the LED Blinker. I bought it because I could install it on my Z900 without any problem even though it was not compatible with the LED Blinker.
As a result, it was possible to install the equipment as per the Instruction Manual without any modification, including wiring, etc.
Since the exhaust device was still installed, we had to work while shifting the servo motor, but it was not too difficult as long as we had a tool with an extension baret, which is easy to apply force.
The angle is sweet with the Japanese Vehicle Inspection Correspondence, but it is a lot cleaner with the elimination of the lopsided Rear Fender.
Note that Reflector is not included and must be prepared separately.
I have installed a type of License Plate Holder that can be attached to the bottom of the Posh Reflector, which was also used on the Z900.
View detail
Light weight, slim type Fender.
[How is it used?
Introduced with the aim of reducing the weight and slimming down the shape of the Front Fender.
Was the one you received as per Image?
The design is good and the quality is good. The carbon is a little thin in some areas, but this contributes to the lightness of the product.
Was the installation difficult?
It is easier but better to remove the front tire and work on it.
How was your experience with it?
Design is good as per Image.
[Included Parts:were they on?
Kit only for installation.
[Was there anything that disappointed you?
Compared to Striker's Chain Cover, I felt the carbon was a little thin, but I don't think this is a problem. I think it's fine,
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail