Reviews
Rear Fender is good to have
After riding on a wet road, the hem of my Pants got dirty, so I put on the Rear Fender. It was easy to install, but when I loosened the ParaLever Bolt (Torque T50), I was worried that I might lick the Torque due to the tightening mechanism (the feeling in my hand was like I was going to lick it). (The feel of the bolt in my hand was like I was going to lick it.)
The bracket is solid for its cantilevered design, but the gap between the bracket and the fender can cause interference and chattering noise, so we recommend using padding before installation to prevent chattering.
As a result, the dirt countermeasure is effective.
View detail
Fits: SUZUKI HAYABUSA
When it comes to Fender Eliminator, it is Active!
There are various Fender Eliminators sold by various companies, but Active's Fender Eliminator is well made and the material is thick enough. The price is not cheap, but not expensive either. It's a sure thing. View detail
Scratch regrets
Delivery and packaging were good, but there were scratches on the product.
Until exchange request
But my effort and time
It's a shame.
People around me said it was a good brand, so I ordered it, but I was very disappointed.
Perhaps because it was an in-stock product, additional products were ordered.
I hope the product is in good condition. -------------------------------------------------- -------- Delivery and packaging status was good, but the scratch of the product Until application But my efforts and time It's a waste. I ordered it because it was a good brand around, but I was disappointed. The additional product ordered is because it is inventory. I look forward to the good product condition. Powered by Google Translator
View detail
Need to be a little creative with Screwdome.
I bought it because there were few other options and I thought it would be better to buy it than to use it by trial and error and have more unnecessary parts.
The bracket for the Right Side is included, but when installed as per the screw holes, the pressure applied to the Fender feels unreasonable, so the existing holes in the bracket need to be widened with a drill or newly drilled to shift the fixing position with the Swing Arm.
Since the two holes on the Fender side do not match at the same time, only one hole was used and the unused hole was filled with black SiliconPate. However, it only takes 20 minutes to adjust the holes on the mounting bracket.
Item number as for FZS600 07214." When 07227. but if it is FZ400 compatible, 5DM series (Fazer 600 1998-2001) of 07214." becomes. 07227. is a 5RT system.
View detail
The construction is neither good nor bad, but not overpriced.
The difficulty level of installation is fair, the quality is neither good nor bad, and the price is a little high for the content.
The first step is to remove the OEMFender, but the Instruction Manual is wrong from the very first step.
It says two Bolt, but I have to remove four… I can tell when I see it, as you can see in the picture.
Assembly after removal is as simple as looking at the Parts.
I would have liked the shape and overhang of the License Plate Light to be a little more manageable.
Incidentally, the compatibility with KIJIMA's LED Blinker is subtle.
As you can see in PlateBase, the Small Type-ized Blinker seems to be quite hidden.
It may be necessary to shift the Number down or overhang the Blinker at the time of inspection.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
You can also substitute OEMBracket.
The OEMBracket broke unintentionally and went into Reflector" Les" status.
Although it was difficult to obtain an OEMBracket, Moto Crazy's parts can be substituted for the OEM.
Thanks.
Installation can be done using the Rear Fender intermediate bolt.
The Reflector itself was prepared by OEM, but was repaired inexpensively.
I think it is because it is pointing downward rather than comfortably level, but that would be a judgment call for the inspector in charge.
View detail
Stylish finish
I have purchased Active's Fender Eliminator Kit for every car model so far, so I chose this one again.
Installation requires touching Blinker's Wiring, so if you want to install it yourself, you will need to have at least a minimal knowledge of this area.
The product itself is solid and I have no complaints about its accuracy.
The only thing I would say is that Reflector is a security component and should be included in the package.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Ninja1000
StrikerRear Fender
It was exactly what I expected! View detail
Depending on the individual, it is an expensive and inferior product!
The product was too shoddy for the high price and inconvenienced Shop who did the installation work.
The tip of the Hugger hit the tire and could not be installed without machining the bolt hole,
It is an amateur and very difficult task.
Depending on the individual, the product is terrible!
View detail
Well worth the price!
I purchased the OEM inner fender because it is short and the Seat back and Rear suspension are very dirty.
If it is long enough, it doesn't have to be Carbon, but even if it is not Carbon, it is quite expensive, so I decided to go with Carbon.
Replacement is easy, but the push rivet screw on the back of the swing arm must be removed carefully because it is reusable. Push the middle part. It is possible to replace the Swing Arm without removing the Tire.
I drove a little on a wet road, Inner fender effect Large.
It was a good purchase and I thought Parenthesis looked great when I put it on.
View detail
Yoshimura fender eliminator kit
Item landed.packing was professionally done.item is as described correctly.yet to fix.my third order and 6 item overall from webike.highly recommend to shop here.thank you webike.very satisfied with the service.keep it up and more order to come. View detail
It can be installed without modification on the '24 MODEL.
Although there is currently no support for the 24-model ZX-6R, the model numbers of the OEM RearFender and License lamp are the same as the 23-model, there were people who installed the LED Blinker on the day of release on SNS, and even when the Z900 was not compatible with the LED Blinker, there was no problem installing the LED Blinker. I bought it because I could install it on my Z900 without any problem even though it was not compatible with the LED Blinker.
As a result, it was possible to install the equipment as per the Instruction Manual without any modification, including wiring, etc.
Since the exhaust device was still installed, we had to work while shifting the servo motor, but it was not too difficult as long as we had a tool with an extension baret, which is easy to apply force.
The angle is sweet with the Japanese Vehicle Inspection Correspondence, but it is a lot cleaner with the elimination of the lopsided Rear Fender.
Note that Reflector is not included and must be prepared separately.
I have installed a type of License Plate Holder that can be attached to the bottom of the Posh Reflector, which was also used on the Z900.
View detail
Light weight, slim type Fender.
[How is it used?
Introduced with the aim of reducing the weight and slimming down the shape of the Front Fender.
Was the one you received as per Image?
The design is good and the quality is good. The carbon is a little thin in some areas, but this contributes to the lightness of the product.
Was the installation difficult?
It is easier but better to remove the front tire and work on it.
How was your experience with it?
Design is good as per Image.
[Included Parts:were they on?
Kit only for installation.
[Was there anything that disappointed you?
Compared to Striker's Chain Cover, I felt the carbon was a little thin, but I don't think this is a problem. I think it's fine,
View detail
Appeal degree is high
Installed on a 2022 MT-09.
The OEMFender was short and I thought it was not good enough, so I replaced it with this part.
The glossy twill weave Type was selected. Although the replacement does not change the driving performance, the appearance is improved and the satisfaction is high.
It is also good to be able to choose 4Patterns, glossy or not, twill weave or plain weave, according to your preference.
Even beginners can work easily by simply removing the OEM-fixed screws and clips and returning them to the same fixed locations.
View detail
Be careful of misconnections
[How is it used?
Installed on a 2022 MT-09 SP.
The OEMFender didn't look good and even if it did, it would roll up mud and dirt, so I decided to replace it with a Fender Eliminator.
Was the one you received as per Image?
It looked better than it does in the image, but it takes Sense to hide Wiring nicely.
I don't have that much Sense so if you look closely, it's rough.
Was the installation difficult?
1.Needs to be completely assembled from RoseRose state.
2.The instruction manual is in English version.
3.Overtorque needs attention because of tightening by Bolt of plastic parts.
4.Wiring for License plate needs wiring processing
The four elements of the system make it a little difficult for a novice maintenance person to install.
How was your experience with it?
I thought it was worthwhile to have it installed because it looks Refreshing compared to the OEM parts. Also, the small parts have the Manufacturer's logo, which I personally think is GOOD.
[Included Parts:were they on?
Three instruction manuals and, although not used this time, a mounting bracket compatible with external blinkers are also included.
[Was there anything that disappointed you?
As is often the case with MT-09 external Fenders, when replacing the OEM Product, the key slot for removing the Seat is exposed and dirt gets under the Seat. This product still has the plate, so I think it is relatively better, but it would have been nice if the lid of the OEM Product could have been used in the same structure.
[Availability and clarity of the Instruction Manual
Note that, because this is an overseas manufacturer's product, it is different from JapanManufacturer's product and is not written very carefully. Also, the assembly method varies slightly depending on the shape of the license plate in each country, so it is necessary to assemble the product while confirming the shape of the license plate.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Long driver required for installation
Long tail and this product in Quantity:Purchased as a set
I am an amateur and was able to install it smoothly, but as the Title says, a long driver is required.
I was fortunate enough to have one, so I was able to install it without any problems, but if you don't have one, I suggest you get a Long driver before installing it.
After installation, the Tail and Fender are gone, and the Refreshing and Parenthesis is good.
View detail
Fits: MOTOGUZZI V7 850 SPECIAL, MOTOGUZZI V7 STONE 850
Expect mud splash reduction!
Not satisfied with one, he purchased two and connected them together in an adventure.
Maintenance was said to be difficult, so it was painted and installed.
The effect is unknown as it has not been driven yet.
View detail
It is a little regrettable.
Installation is easy due to the precision of the product.
However, the cord of the License lamp is halfway long and the attached Extension Cord is connected in a place where it is likely to be flooded.
I extended it with a solder and insulated it with a Shrinkable Tube.
The Others is a product I have no complaints about.
View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit
It is one of the first parts you want to install when you buy a new car. View detail