Reviews
No discrepancy in design.
Easy to install, no design discrepancies
I use the double-sided tape provided. (Shown on the Right in the fourth photo) indicates disappointment for not having done what one wanted or intended to do
We used 3M's Ultra Strong Double-Sided Tape
The rest is drilled with a 4mm Drill and the material provided.:Fixed with PlasticPin and done.
Firmly attached and will not come off.
It is hard to tell the effect when it rains hard. (You will get soaked anyway.)
After a rain or when running in mountainous areas where water is flowing, there seems to be less splashing.
Well, if the price were a little lower, I'd give it 5 stars, but I'll give it -1 star for that.
View detail
For those who want to make inner fender look cool...
When we converted to Fender Eliminator, the OEM Rear Fender splashed a lot of mud, so we purchased this product, which was extended from the OEM Shape.
I ordered Black Gel because I wanted to put Sticker on my Fender and I thought it would be unnatural to use Carbon only here.
It looks great, cool ！！！！ I thought, "Wow!
But as to whether the mud splash was reduced, well, as you can see from the length, it didn't change much (lol).
My car is equipped with a rear box, so my back is protected there, but if you have a box-less type, I recommend the OEMFender.
However, I think I can recommend Inner fender to those who have the sensitivity to think it is cool with an extension!
View detail
Hole position is perfect.
[How is it used?
I came across this product after searching for a variety of products because the XJR400R I purchased did not originally come with a front fender.
I would have preferred OEM, but buying a used one would cost about 5,000 yen or more, including shipping! So we chose STING R&D products, which had been used in different models of cars.
Was the one you received as per Image?
The carbon grain is beautiful when viewed from the front.
The reverse side is FRP, so only the surface part visible from the front is covered with Carbon.
The edges are a little rough in some areas, but at this price, it is acceptable.
Was the installation difficult?
The XJR400R was easy to replace because the Tire could be replaced with the Tire still installed.
The front fork has a clearance and 4 hole positions that are perfectly centered, so it can be installed without difficulty.
However, the hole size is too small to accommodate OEM colors.
If a collar is to be inserted, the hole must be expanded.
How was your experience with it?
I chose the twill weave Carbon type, and I am quite satisfied with the appearance.
It turned out to be Style as I had expected without any particular cheapness.
The hole for the cable guide was also well drilled.
[Included Parts:were they on?
Front Fender only.
Bolts and colors are required separately, of course, so it would be better to have the original or OEM parts.
[Was there anything that disappointed you?
There were some problems with the edge treatment and hole Size, but considering the price, it is acceptable enough.
【Review】
It can be installed on XJR400R without any problem.
I am generally satisfied with the product, although there are some compromises that need to be made for the price.
Also, Webike did not have it in stock this time, but I received it within a week.
View detail
Steady making
I had an experience with an Aluminum Fender Eliminator on another car and the vibration caused a crack on the number mount, so I decided to use this product.
Installation is also easy. I thought it was unstable because only one side of force can be applied around the axis with the Ratchet.
Well, that may be experience and skill in that area.
The product description said it was about the same weight as the NORMAL, but … I'm not sure.
It is quite heavy. You can clearly see it. But it may be good if you think that it is well made for the cost.
View detail
I would have been fine with OEMFender...
When I went through the OEM Fender to get a belt to fix the Seat bag, I found that the OEM Fender was plastic (not weak, but it would flex), so I decided to use the Fender Eliminator Kit, which was also inexpensive.
Probably the most difficult part of the installation is the removal of the OEMFender.
Instruction Manual does not have instructions for removing OEMFender.
However, if you are a do-it-yourselfer, you can remove the Rear Fender when you insert the ETCCard, so you may not have to do so much work (^^;)
The construction itself is solid, so the seat bag can be securely fastened to the belt.
I feel like it could be a little more behind the License Plate, but I am satisfied with the strength of the product.
View detail
Fits: HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY, HONDA CRF250L
It will be attached to the 2023 model.
The angle of Number is too standing.
Bend your own Bracket
View detail
On the GSR750
I chose this product because I like the clean Rear view. I like that it is not cluttered, but it may feel cheap to some people.
The process was easy and uneventful.
The LED Lamp is also beautiful, but the projection to attach the Lamp is a little too large.
If we drive long distances in the rain or on roads with floating dirt, our rear bags and backs will get dirty, but this is unavoidable.
The price is low and it is a good product!
View detail
Fits: HONDA VFR800X Crossrunner, HONDA VFR800X Crossrunner, HONDA VFR800F, HONDA VFR800F
Original color painting
Original color paint installation Tricolor color is not easily done?
Mounting bolt is partially Stainless bolt&Aluminum bolt
Use
Bracket and Clip are painted thickly after chamfering.
Chain Cover is worth modifying
View detail
fenderless
[How is it used?
Was the one you received as per Image?
It was as expected.
How was your experience with it?
It has a much smarter look.
[Points to note]
If you don't slow down at large bumps, the Reflector may come in contact with the Tire and damage it.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
It can be installed without removing the Tire, but...
For some reason, the GSX-R1000R after 2017 does not come with a simple Hugger, and I bought it because I liked it design-wise anyway, saying it was essential to protect the suspension.
The installation was done without removing the tires for the time being, but since space is limited, a long Glasses Wrench was necessary.
It was able to be installed with minor adjustments in positioning, etc., but it was a challenge because there is a place to fix the nut inside the Hugger.
But it looks good, so I'm happy with it.
View detail
Looks like it's getting shorter.
The angle of the License Plate is perfectly fixed with COMPRyans. View detail
The impression changes by a Large amount, and there are a few points of concern.
[How is it used?
I bought it to change one of the areas that I didn't like the look of the NORMAL DAX, and the change together with the Rear fender-less and Exhaust System has changed the impression considerably.
Was the one you received as per Image?
I am satisfied with the texture as per Image.
Was the installation difficult?
The installation is so easy that even a beginner like me can do it with a small one-hour job.
However, you must read through the Instruction Manual. This is because the position where the Fender is to be installed 10.5 cm from the bottom edge of the Outer tube. If you do not look at these parts, you may end up with unintended results.
How was your experience with it?
It was quite nice to be able to install Inner Tube's Guard-like Parts, etc., using the Bolt holes that removed the OEM Fender.
[Included Parts:were they on?
Instruction Manual is included.
[Was there anything that disappointed you?
The brake hose guide comes with an extension part that prevents the hose from interfering excessively with the Up Fender, but it still interferes somewhat, and the color of the black hose is transferred to the Fender.
It is a moderately priced product and would be better if this area could be improved.
【Review】
I have written a lot about it, but I am generally satisfied with it, except for the cosmetics.
I don't run in the rain, so I'm not sure how much it would change the practical aspects of the product, but at least as far as looks go, I don't think this is a product that would betray anyone who is considering making Up Fender.
View detail
![[Powerbronze] Mud Deflector](https://img.webike-cdn.net/catalogue/images/63581/360-H102-1_TS.jpg)
fender
It was fitted to avoid mud splashes on the Rear.
The RC79 was installed on the RC60, so some modification was necessary, but it was attached in 30 minutes.
I think mud splashing has also decreased somewhat.
View detail
Hurdle is a bit high for a beginner to install, but the Rear area is quite Refreshing!
[How is it used?
The front and rear fender area of the DAX125 was heavy, so we installed a rear fender-less system in conjunction with the exhaust system replacement.
Was the one you received as per Image?
I am satisfied with the texture as per Image.
However, the fact that it has a reflector and the number angle conforms to the new standard was the deciding factor, so we decided to go with this one, even though it is a little expensive.
Was the installation difficult?
The installation itself is easy, but I thought the process of removing the OEM Fender was a bit of a hurdle for a beginner like me.
It was especially hardMODE to remove the OEM License Plate Light from the OEM Fender cover in order to use the OEM License Plate Light.
(I couldn't figure out the Coupler, so I ended up cutting a piece of the OEM Fender cover to separate the License Plate Light from the Cover.)
How was your experience with it?
After looking at Fender Eliminator Kits from various manufacturers, I decided on this product, and I think it was the right choice because it looks the most refreshing.
(However, if you bend down to look into the Bolt, you may be a little bit surprised by the number of Bolts.)
[Included Parts:were they on?
There was a Mounting Instruction Manual.
[Was there anything that disappointed you?
As a disappointment or request, I thought it would be new if the Instruction Manual included instructions on how to remove the OEM Fender.
The removal time was about three times longer than the installation time, so the Instruction Manual for the installation would be more useful.
【Review】
I have written a lot about this product, but I am very happy with my purchase.
Personally, the three things I did not like about the look of the DAX125 were the Exhaust System and the front and rear Fenders, so I was determined to purchase only those three items that I was absolutely satisfied with.
The License Plate Light is hidden inside the Fender, making it quite Refreshing, yet the Number angle conforms to the new standard, so it is a good product that does not make you feel guilty.
View detail
Bold & Strong Design, Some Fitting Difficulties
This fender is both futuristic and retro in dark Bladerunner style! Flawless twill weave carbon construction is stiff and very strong, while saving 0.5 pounds from the unattractive oem fender. Installation was a little more tricky -- I had to slightly ovalize the fender's mounting holes to prevent cross-threading the screws. If you have ANY trouble starting the screws, STOP and use a small hand file to expand the holes slightly. Take your time here to do a good job, and you will succeed. I give 5 stars on design concept and beautiful quality of carbon twill, 3 stars for some problems when installing. Web!ke Japan, you impress me so much! 43 hours from placing order to opening the box in my garage in California! You set the highest standards, keep up the great job. View detail
Fits: YAMAHA XMAX 250, YAMAHA XMAX300, YAMAHA XMAX300
Simple is good.
There are no unnecessary decorations.
There are no adjustment functions such as accuracy.
Instead, I like its Simplicity.
Since the same screw holes are used as those of the YAMAHAOEM Tandem Backrest, the backrest will be slightly tilted when installed at the same time.
but not enough to be bothersome.
View detail
Rear Fender installed.
I bought it as a Custom.
It looks good and cool.
Easy to install
Mud roll up is also better than expected.
The Instruction Manual is also clearly written.
View detail
very good
Very nice, but if the Gold net was Black, it would have been 5 Stars. View detail
Gives an overall better look for an all road orientated Monkey
About quality and texture, I can confirm the quality great and the material used is steel plate with a satin black painted finish.About the feeling of use, This down fender bracket set gives an overall better look for an all road orientated Monkey but it would be nice if the bracket had some adjustment to fine tune the height and angle of the fender.Products to buy together, By relocating the front fender from it's original position you have exposed the horn which looks cheap, the addition of a horn cover or horn relocation kit to your cart would be recommended.Difficulty of installation, I can say the fitment of the down fender bracket set for my installation was easy due to the ease of access to all the mounting bolts and included instuctions on how to assemble the set.Cost performance and comparison with other products, The pricing of this product is great You receive parts made from good quality material and the design of the set is solid. There are a few higher priced options similar to this product but with more attractive parts in their set, in the end they achieve the same outcome.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Hoping to prevent stains on the car body.
In the case of NT1100, mud splashes will contaminate the rear suspension and spring,
I resorted to this one.
I think there is a LARGE difference with and without.
P&A products seem to have good Coverability.
One of the mounting holes was slightly out of alignment.
Cracked.
There may be individual differences, but if it doesn't fit slightly when you install it, don't push too hard.
It is better to process the hole Small.
View detail