Reviews
If only the accuracy were a little better...
The OEMFender removal was a little Large weird, I bought the FRP one and it looks perfect, both in texture and looks!
However, the position of the hole on the License Plate is not the same as that on the Quantity:Pair (for Left and Right) It was not symmetrical, and the Fender itself moved up and down with the supplied Bolt, so a little ingenuity was required to install it.
View detail
It is lightweight, but…
Since the kit itself is aluminum and of small type, it is quite light and has a good design, so I am satisfied with it as a kit.
I was thinking of using OEM parts from Blinker to License Plate Light, but it seems that it is not possible to use them by simply installing them.
The angle of the license plate is not bad, and the kit can be installed without any problem.
The finish of the parts are made in a foreign country, and there are some scratches due to insufficient packaging, but once installed, they are not noticeable, so I was able to cover them up with the enclosed Sticker and forgive them. (Lol)
Overall, I think the price is a little high for such a small amount of content, but depending on the customization, the Rear O-Bar handle portion may be finished quite lightly.
It is not easy to find vehicles that have them installed, and most importantly, they are lightweight, so I plan to install them in a planned manner while having a lot of fun.
View detail
Fits: KAWASAKI NINJA400, KAWASAKI Z250, KAWASAKI NINJA250
so-so
It came on without any modification, and the Center is not too bad.
I think it is a little too long. I think it is a little too long, but once you get used to looking at it, I feel this is fine.
It is not an anti-mud splashing measure at all, but it is a part for appearance in the first place.
View detail
almost
S1000RR 12MODEL.
The Body is well made. If you are not dissatisfied with the shape, it is a good product. It attaches quickly.
The assembly is a bit annoying because of the large number of parts, but I chose it because it offers more flexibility in combination than the oddly integrated parts.
But personally, I find it a bit tacky.
Below is a list of areas that I thought were subtle. I did not feel that the quality of the product was not good enough, as it was all a matter of taste in design.
License Plate Light is very bland.
The design of the Fender Eliminator is a bit inward, but it looks as if the OEM's bloated License Plate Light has been transplanted. I couldn't put it on myself.
Reflector is on top.
→KitSingle Item:This is not so noticeable when viewed as a single item, but when attached to the car body, the reflector is on the top and the number is quite a bit lower, resulting in a blurry image. It's a good thing that the Fender Eliminator Kit is so good. 。 The number position does not change even if it is removed, and it was too much trouble to try to force the number up, so I gave up.
Blinker Bracket is very prominent.
I'm not sure if it's the Fender Eliminator or the Blinker Bracket, but it seems to me that the Blinker Bracket is very, very insistent. I decided not to use it.
These are the points that I personally thought "hmmm", but if you don't mind, I think the quality is good enough to buy it and put it on as it is. At least, I don't think it's a "HaGap". I think the quality is good enough for people who don't care about it to buy it and put it on as it is.
I hope this will be helpful.
View detail
You get what you pay for
cheapest mudguard It is recommended to install with screws Don't use double-sided stickers, it will make you regret More mudguard length would be better View detail
The Chain Cover part is squishy.
The delivery time took a large amount of time, and I was eagerly awaiting the arrival of the product.
The cover part at the top of the chain is so squishy that it makes me wonder if it is really sturdy enough to hold a large bag.
It looks good on the carbone, but it may be partly because of its design.
Personally, I regret a little that OEM would have been sufficient.
View detail
cheap
Fender Eliminator from ksStyle was not available, so we substituted it here
The number angle is a little loose, so if you want to raise the number angle precisely, use another manufacturer's number angle.
View detail
I like it a lot looks-wise.
Although the price is higher than other Fender Eliminator, the design is beautiful.
Personally, I like it a lot.
Good for bonsai w
View detail
It's okay.
good point
The shape is good, the parenthesis is good because it is Carbon, and the weight is not much different because it is Carbon, even though it is now Large.
A bad point
It's carbon, so it's gapped, but there are places where it's gapped almost to the point of a single hole.
[Color] Some areas of Black paint mixed in with Clear.
The delivery date is completely unreadable.
View detail
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off!
Even if it was attached simply and you carry out what time contribution, tell the reason for a send-off! View detail
Standard Custom
Installed on a 14 Grom, the Rear area has been refreshed and parenthesis has improved. But you have to be prepared for mud splash. It would be great if the angle of the number was a little more flat, but it seems that it is not necessary due to regulations. View detail
Gap ants in the making and fitting of the look
The lightness of dry carbon is outstanding, and the appearance of the glossy twill weave is perfect.
There is no difficulty in installation, but it is quite Quantity:Pair (for Left and Right) The fittings were difficult to fit, as they were open to the
The mounting holes on the Right Side required long hole machining and were installed by forcibly pressing them into place.
I know this is sold as long, but I think it would be nice to have a middle or short version.
Personally, I prefer about two-thirds the length.
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
too hard
The Z900RS license plate kit was so difficult that I struggled, but it is pretty when I put it on, but it is good for my mental health to pay more and buy a convenient license plate kit. ------------------------------------------------------------ --- Z900RS license plate kit was so difficult, but It's pretty, but it's pretty, but it's good to buy a more convenient license plate. Powered by Google Translator View detail
Fits: HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
cool!
It's nice, but the size is not right, so it's a product that makes you worry while installing ------------------------------------------------------------ ----- It's cool, but it's not perfect, so it's a product that makes you worry about installing it. Powered by Google Translator View detail
Hmmm, they're cheap.
The Fender Eliminator was cool and I put it on.
After installation, I didn't really notice it, but it looks very cheap. It is worth the price.
I appreciated the included Parts.
If there is something else you are interested in, that would be fine too.
If you are cheap and want to put it on anyway, it is possible.
View detail
To prevent stains.
The NC750X's Front Fender is short and often gets dirt up to the Radiator when driving over puddles.
To mitigate the damage as much as possible, we installed this product.
We did not use the supplied double-sided tape, but attached it with adhesive for plastic.
That would be a better way to fill in the gaps.
After installation, I drove over puddles, and I think the amount of dirt was reduced compared to before installation.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI NINJA H2
Luxury is good!
It has a more luxurious and nice look than the OEM short Fender.
The price is more reasonable than other manufacturers, and the installation took some modification, but I'm satisfied!
View detail
If you want to use Fender Eliminator, you can also use this.
If you are going to use Fender Eliminator, you have to change this as well, otherwise there will be a lot of discomfort.
Rear tire maintenance is also easier.
View detail
Fits: APRILIA RS 660, APRILIA TUONO 660, APRILIA RSV4 FACTORY
Aprilia RS660 Fender Eliminator
The Ry TEC products seem well-made.
It was just that the Fender part was a little shorter than I had expected.
I thought it would have been a little more stylish if it was just below the Tail lamp. 。 I am satisfied with the product because the Fender is shorter than before.
Is it difficult for a beginner to install a license lamp?
There is also the task of taking Earth to MotorcycleBody, which requires knowledge.
The Blinker will also be exposed to the Wiring, so you will need to prepare parts to cover it! I installed a homemade machining box on the Rai TEC product so that the Wiring is not visible. (Waterproof processing and external protection to prevent water and mud from getting on Wiring even in the rain)
If you can tinker with Motorcycle to some extent or have wiring knowledge, Large is sturdy.
I also skipped the Fuse in the Tail section once.
The Instruction Manual is of course the English version.
View detail
Can be used for DUCATI SS and Initial ModelMONSTER S2
It can be used for the 900SS, 750SS, and Initial ModelM900 of the 90s. Many of the exteriors for older models are no longer available, but we appreciate your support. View detail