Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Except for the modeling...
I understand that it is a substitute for a processing premise, but there are places where distortion and warping are strong.
Gaps are made to the point that they cannot be corrected. lol I can get the feeling that low quality is okay because it's supposed to be processed.
Note that the Under Cowl cannot be installed with OEM exhaust pipes, of course. The molding is pretty floppy after ??, but it's cool.
View detail
It's hard to install
Cowl was burnt due to interference with the lower part of the vehicle body.
Since it is installed inside the cowl, there is a limit to how much modification can be done, so we gave up on using it.
View detail
I've been waiting over 6 months for this...
I am a New Model KATANA rider. 。 Ordered in spring, delivery delayed…. Delay…. Also delayed…. It finally arrived at the end of the year.
Now, assemble it ? But the middle of the three mounting points don't fit together. 。 I managed to attach the Right Side by enlarging the holes in the bracket to the limit, but the Left Side is not attached at all. 。 Bracket is attached to a ton of places. 。 In the end, the Firmly fixed Bracket was scraped off and the Bracket was remade and fixed and finally installed.
I heard from fellow KATANA members that A-TECH products are no good? so I wasn't too surprised.
If I returned the product with an Objection, I did not feel like making an Objection because I thought I would have to wait another year to receive the product again.
Anyway, it seems that A-TECH's Carbon parts have many Objections.
Those who order should be prepared to order.
View detail
The product came with scratches.
As per Title, I received a scratched product. 。
The price is quite expensive, but I guess that's what you get from an outside parts company. 。 The installation method is also quite insecure, just drilling holes and screwing them in. 。 So I'm trying to figure out if I can put 3 points on Bolt and Nut, but this is very difficult (especially Quantity).:Pair (for Left and Right) (MF10 is a large strange thing, like if you do this, you can't put that, or if you put that, you can't put this afterwards. 。
I think it looks nice, so it's good for someone who can afford almost 30,000 without worrying about the details.
View detail
Fits: SUZUKI Address V125G, SUZUKI address V125
The color etc. is good, but it's a pity that it doesn't fit as Exactly as OEM.
Used to replace an OEMCowl that had deteriorated and become white, and had a hole that did not allow a Clip or Screw to be inserted in Smooth any more than an OEMCowl. The OEMCowl has a hole in the Smooth that prevents the insertion of a Clip or Screw. However, the only complaint is that there is a 3mm gap between the Rear Leg Shield and the Cover and Leg Shield, whereas there was no gap in the OEM, and it is expected that mud or water splashing up from the front wheels will enter the vehicle while driving. In addition, the angle of the clip hole on the upper side of the Lid and Maintenance No. 2 was not good enough to fit the shield effectively, and it could not be fixed. In the end, they were fixed with Screws. These two things are the reason why I gave it 2 stars, which is a little disappointing. I don't remove these inner cowl often, It's a lot harder to take it off and put it back on than it was for the OEMs." I thought as I installed it, even though the thickness and texture of the inner cowl feels the same as the OEM…. I would recommend this product to those who can accept this point in consideration of cosmetics. View detail
Cracked.
Postscript.
Crack in Bolt On part under Right without driving 100km.
It was claimed to be sturdy and Bigli...
Even if you fix it with all kinds of glue because of the location, it cracks when you tighten it with Bolt..,
We are currently asking WeBig to replace it.
Since it is FRPMaterial, did you happen to pull a HaGap?
View detail
parts shortage
Very nice product! The shortScrew is 11, but theQuantity:I was disappointed that only 1 pc was included in the package instead of 2 pcs. I installed it, but one part of the cowl is not stopped, so I'm worried about the buzzing sound in Situation with strong embrace. View detail
Under Cowl is a shame.
The upper cowl is squeezed inward near the radiator and interferes with the radiator cap, but the rest of the cowl fits without any problems.
Under Cowl has a bad hole at the bottom, and I am thinking of filling it with FRPRepair material to make it one piece and use it.
Upper Cowl and Under Cowl could be installed without any problem.
Material:I was prepared for the fact that there would be some hole matching and BALI removal etc. since it is an FRP product, but I am quite disappointed about the Under Cowl.
View detail
Quite a hassle to install.
Additional Impressions.
I referred to First's impressions and the installation was a little Large strange as described.
Instruction Manual is clunky and unfriendly!
It is explained that it can be installed without removing the cowl, but it is very difficult to do so without removing the cowl! I'd say it's impossible!
If you don't modify the position of the bracket, there will be a gap if you attach it as it is!
It says "Magic tape included" but it's not. You have to remove it from OEM and transfer it!
It looks like the Instruction Manual doesn't add Rubber molds, SpongeCushion, etc., but if you're interested, there's nothing in there, so you'll have to remove it from the OEM and relocate it successfully!
It's just a mess, made of carbon after molding! Clearance, Included Parts:, and so on!
Please install it with the assumption that it will be modified! Magical thinks that (Lol)
Installation was not difficult, but to be honest, it was quite tedious.
View detail
It's too bad it's so expensive and so poorly made.
The back of Carbon was sketchy. (Lol) If you look through the light from the back, you can see that the back is crudely made.
Magical and K Labor are not trustworthy these days because of their high prices and poor workmanship.
It would be nice if other manufacturers had parts, but most of the GSX1300R HAYABUSA's carbon is from two companies, so there is no choice.
It looks good, but I wish the price would be lower if it is made this bewilderingly messy.
View detail
Exterior Kit
I am disappointed with the price increase. I used to be able to buy it for $2,000. (T_T) View detail
The color was different from the Image, so I requested a return.
I checked the product. The color BrilliantRed was different from the color of XSR700, so I had to return it. View detail
Fits: YAMAHA SR500, KAWASAKI ZEPHYR750 RS, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, YAMAHA SR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ
quite
It took a long time to install the product because it did not go on properly.
Looks better!
View detail
Fits: YAMAHA RZ250, YAMAHA RZ350, YAMAHA RZ250, YAMAHA RZ350
Covers surface rough, although it is assumed to be painted.
Purchased for painting. It is a little wide. View detail
Rear Fender requires Cut
Rear Fender needs longer Cut than OEM.
Cut with Nipperetc., prepare the cut section with Belt Thunderetc., and melt the white discoloration with Heat Gun or Burner to restore the color.
The parts to be cut are made in an easy-to-understand manner, so there is no problem, but some people may find it quite time-consuming.
View detail
Wind Cutting is so loud!
Please refer to the Mounting Bracket imprementation as I put it on there. In conclusion, ask a store to do the installation work!
Now, this Cowl is very noisy, beeping on the highway. I can't believe it is a HondaOEM Product.
As others have said, you need to pack the Sponge, block it up, or cover the Frame behind the Duct with Rubber sheet.
View detail
Hmmm…Is this a PRO job, or what?
First thing out of the box … cesspools everywhere.
Well, it can't be helped. I found an unnatural Leutor's mark while thinking about it.
When you look through it to the light…
You're repairing the crack, right?
I bought it new!!!!
So please be very prepared to buy it.
View detail
There was a Wound.
There is no distortion, and I think it is a product with excellent cost performance, but unfortunately, there was a wound of about 3cm on the Left Side Cowl.
I thought about returning it, but I didn't want to wait for months, so I just installed it.
Also, the screw hole was too small, so it needed to be widened.
View detail
I'm sorry to disappoint you...
In contrast to the black metallic car, the paint has too little lame look...
(It contains only 1/3 of the Lame of the actual picture.)
The finish of the reverse side is also made of FRP and has no texture...
(It's very undignified of the vehicle.)
The installation instructions are only attached to a child's drawing level.
Also, there were no detailed instructions and installation was not easy.
In particular, the L-shaped bracket that attaches to the horn is completely different (probably depending on the year), so the purchaser must devise his own way to fix it.
⇒ My vehicle is a 2021 production MODEL.
Also, when the L-shaped bracket is mounted in the center of the vehicle, the hole on the lower side of the cowl is misaligned, making it difficult to match the actual vehicle.
I haven't done any actual driving yet, so I haven't been able to check for resonance, chatter, or windshield effectiveness.
All in all, I'd say.
You should think more about User.
I bought it after seeing the picture after installation on the web, but I am very disappointed.
View detail
Screw...
When I attached the head lampBracket with the attached screw from the pure Normal Thread Screw, I was worried that the screw was too short and did not go in deeply. I have to change the bolt from OEM hex to normal home center. And the most important thing is that VisorBracket is connected in the middle next to Light Cover, but Screw hits Light Cover. Even if I adjust it forcibly, when I give the Light with the clearance of Limit 1mm, it hits the hanghang. Because I had no choice, I prepared a short Screw and changed it, but Nut was the last minute, so I put a thin Rubber on the gap with Double-sided Tape. View detail