Reviews
Essentials for commuting to work and school
We installed this Screen (RS) on an ADDRESSV125S.
I found that the wind does not blow directly against my body during winter driving, which reduces the coldness I experience.
Also, when driving in the rain, the logic is the same and comfort is improved.
View detail
No need to attach the phone Folder to the Handlebar and it is easier to turn the keys!
First of all, I feel that Eliminator has become taller and Parenthesis has improved (laugh). The windproof performance is not high and the width is slim, so the wind is coming in from the side of the Shield. For those who value performance, we recommend a wider width. I guess it is better to have it than not to have it. What made me happy was that I had attached the Smartphone Holder to the right hand side of the Handlebar, so I had to stick my hand into the narrow space and turn the Engine key, but when I moved the Holder to the Clamp Bar, I found that the keys around the Holder were refreshed and the Holder was much easier to use. But when I moved the Holder to the Clamp Bar, the key area was refreshed and the Stress was gone! I was able to install it even as an amateur while reading the instruction manual. However, as the instruction manual also warned, the Assembly is somehow prone to cracking! I also have a quantity:2pc. I broke one of the set points and had to use superglue, so you might want to have some ready just in case. I am thinking of adjusting something because I hear a chattering sound when I run after installing it. View detail
Effective for high speed drivingLarge
I used to install something smaller than No Brand's Blast Barrier, but the Blast Barrier is superior in both form and effect. It is especially effective at high speeds. View detail
Wind protection~.
Scooter。
I used it for another car model. I installed it to deal with the wind hitting my stomach.
It's not bad at all.
Convenient angle adjustment. Adjustment is made while controlling the passage of air and taking balance of back pressure.
I'll take it off in the summer (laughs).
View detail
plug and play to gixxer 250
About quality and texture , the bracket materials are solid About the feeling of use : wont wobble during rides Products to buy together : none Difficulty of installation : easy, just remove side mirrors and install brackets and windshield Cost performance and comparison with other products : pricey compared to other products but very worth it About shipping and packaging : fast shipment and good packaging Any concerns, cautions, or advice when purchasing : none View detail
The Grom version is used for the KTM390DUKE.
[How is it used?
Since we often drive the 390DUKE on the highway, we decided to install Shield to withstand wind pressure.
Was the one you received as per Image?
The Shield is a very lightweight, lightweight, and lightweight product.:Pair (for Left and Right) Thanks to the shape of the shield, the front blinker is not covered by the shield, and it was installed without any discomfort as if it were a 390DUKE-specific shield.
Was the installation difficult?
The basic installation method is the same as that used for the Grom, and it is large and sturdy. However, since it needed to be installed closer to the rear of the vehicle, we used KITACO's Mirror adapter set 8mm Normal Thread Screw (part number MA-12) to shift the entire screen to the rear. Since this product does not come with a windscreen mole, I separately purchased MRA's Screen Mole Set (Part No. MRA-2) and installed it. However, since the length of this Windscreen Mole is 1 meter, it could not cover the entire circumference of the Shield, but since the lower part of the Shield has a tight bend, it would have been impossible to install the Windscreen Mole around the entire circumference of the Shield anyway.
How was your experience with it?
Even when cruising at 100 km/h on the highway, the Shield is not directly subjected to wind pressure, so it is extremely comfortable. Since the Shield does not cover the Front Blinker, the light from the Blinker does not reflect on the Shield. However, there is a white LED position light around the perimeter of the DUKE Headlight that is always on and emits light at an angle upward, so the light reflected off the bottom of the Shield and was a little glaring at night. I am thinking of painting the inside of the lower part of the Shield in matte black in the future.
[Included Parts:were they on?
A complete set of Bracket and Bolt required for installation is included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:In case of diversion, ingenuity is required.
Availability and clarity of Instruction Manual:A carefully illustrated instruction manual is included.
View detail
Almost satisfied
I think the quality is very good, although the Bracket was bent, or I had to adjust it by bending it a bit to Center it out. View detail
Fits: HONDA CT125, HONDA GROM
I can't get into it without Spacer and Rubber's Cushion.
I bought it to replace SS to RS, but it is inconvenient without Screw set. Without it, I can't get into it after all. It is not so different from buying the whole set. View detail
Replacement
I had to replace my previous Screen because it was deteriorating and my visibility was getting worse.
Good visibility and very good wind protection.
Recommended for winter and highway use.
In midsummer, it is hot with no wind, so it may be better to use Short Screen.
View detail
Easy to install
It is high enough to provide good wind protection. There is a 10cm gap between the bottom edge and the meter, and I have read some reviews about the effect of wind passing through the gap, but I did not mind it that much. The bar for attaching a cell phone, etc. is also sufficient for me, as I do not plan to attach more than one item, and there is little to obstruct my field of vision. View detail
Good luck DAYTONA.
I contacted Manufacture, but they replied that they had not confirmed the compatibility with the 2023MODEL. Since I had opened the package and could not return it, I installed it and it installed without any problem. I wish they would do a little more research on their own products. I think they could have handled the situation differently. View detail
Style and effectiveness are excellent!
I have used it in the past for C125 and CROSS CUB and was satisfied with both Style and effect. This time, I used it for JA61Cub Pro and it was pontooned without any problem. View detail
[Color] Purchased and installed Clear and it looks good.
Personal opinion, [Color] Since we chose Clear, the BaRear does not have such a strong presence and does not disturb the atmosphere of the XSR900 too much. View detail
Eliminator
I'm glad I put it on Eliminator. View detail
Easy to install and effective
I installed the Eliminator on my first purchase as a motorcycle novice in October 2023. The manual that came with the Eliminator had detailed instructions on how to install it, so even a beginner could install it with only a small Hexagonal Wrench (not included) in one hour.
The angle at which the windshield can be collapsed can be adjusted in three levels. I drove at high speeds with the Largeest and Smallest angle, but I did not feel any difference between the Large and Smallest, so I installed it in the most collapsible position. (I installed it in the most collapsible position because it looks streamlined and cool.)
The wind from my stomach to my chest area at high speeds, which was also the reason for installing the Large, is prevented considerably, and driving has become much more comfortable. I don't drive at high speeds on ordinary roads, so I don't think I'll be wearing the Merit very often.
Since the windshield will change the appearance of the Large, I think it would be a good idea to weigh the change in appearance against the improvement in comfort at high speeds.
Incidentally, the angle of the installed windshield can be changed by hand, so it is possible to modify the position of the windshield after installation. However, it is not possible to change the position of the windshield after installation.:Naturally, it is not possible to adjust by hand beyond the set 3-step mounting angle.
View detail
Looks good!
It is small and not very effective as a windshield.
Since the top edge comes much lower than the chin.
But it looks Cool.
I didn't care much about it at first, but if it is installed as it is, the Mirror position will be much further inward than the original, so some people may find it difficult to see.
So I use the height adjustment Spacer for Mirror to return it to its original Mirror position.
I set the tightening Torque to the same as the original and so far it has not shaken or loosened due to vibration at all.
View detail
Fits: Others , HONDA CB650R, HONDA CB650R, HONDA CB250R, HONDA CB250R, HONDA CB125R, HONDA CB1100 RS, HONDA CB300R, HONDA CB150R
[Color] Clear doesn't interfere with Motorcycle Design
It will not interfere with the design of the Motorcycle, and to some extent will reduce the wind blowing against the rider's body. View detail
Windshield is Large
The large shield provides excellent wind protection. The angle can be adjusted, and together with the hand guard, it increases the outdoor feel. View detail
Fits: Others , HONDA CB650R, HONDA CB650R, HONDA CB250R, HONDA CB250R, HONDA CB125R, HONDA CB1100 RS, HONDA CB300R, HONDA CB150R
Aero visor hornet 250
I'm using on Honda hornet 250.im satisfied with product.thikness if plastic is good and flexible.There is small shape on top for aerodynamic. When you fix it for specific motorcycle according to that you need to select mount bracket. When it fixed it will closed to the main headlight cowul.I'm happy about product.Recomenderd for motorcycle lovers. View detail
Fits: HONDA CB1100 RS, HONDA CB650R, HONDA CB650R, Others
Highway is easy
It is easy to drive on highways. Easy to install as it is specially designed for this purpose. View detail