Reviews
No obligation.
Since the seal is voluntarily attached by Manufacturer to moped models, there is no problem even if it is not attached.
However, I have encountered a few times where the driver has mistakenly parked the car in front of me and thought it was one of a kind, only to see the License Plate and realize that it was a misunderstanding.
This is especially true for CUBs, which all look the same at a glance.
The Rear is not a problem because the color of the License Plate is self-explanatory, so we only used for Front Fender.
To be honest, I am not sure how effective it would be on a white Fender, but it is a good luck charm just in case.
Furthermore, it is a Seal, so durability is not an issue.
It is not at all necessary for some types of cars.
View detail
Fits: SUZUKI GSX250R, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Something ….
I'm sorry, but this is the price for this.
It is so plain that even I forget that I put it up.
I only notice it when I put Gasoline in.
View detail
I wanted to know about Size before I bought it.
CE47ADDRESS110 is neither DOHC nor 4Valve, but SEA BASS GlobalSite says that OilDrain hall is same as GSX-R. I also heard that Engine is Long stroke and ManufacturerOEMHigh CamshaftSpec. I also heard that the engine is long stroke and ManufacturerOEMHigh CamshaftSpec. I bought this car thinking that I can call it GSX-R. However, the side cowl of my Address is slightly short of space and there is no other space to put it. I am having trouble finding a place to put it because my car is a Honda, so it would not be stylish and I have no place to put it. I inquired about the size before I bought it, but they didn't tell me. They should have measured it for me since they had it in stock. Webig is very unfriendly.
I will write Size for future buyers. The largest size is 215mm wide and 85mm high.
View detail
It was unexpectedly Small.
It is better to think of Large Thin Sticker as the main and the rest as extras.
I was going to use something other than Large Seal, but it was too small and I was at a loss as to how to use it.
I ended up using it for the Fork Guard. I think it looks great, but personally, I would have preferred it to be a bit larger.
From a distance, it looks like one point of Red, but it is small and lacks appeal. Well, let's say it's OK.
View detail
This Sticker is an extracted character "Tune." It is
Please note that these are not extracted letters.
I bought it to match the Gold amount to get free shipping on my other purchases, so I don't particularly care about the workmanship.
View detail
It took a lot of work.
This is only a personal evaluation.
I got my long-held dream, MotorcycleGarage.
ask a contractor to do it for you
Directly attached to the ground. Quantities in foundation assembly.:Pair (for Left and Right) The Garage was installed in a block with Brass in the The drawing shows the air-conditioner hole, the ventilation fan hole, and the GlassSash as a quantity.:Pair (for Left and Right) I had it installed on a Quantity of SprayBond type Urethane foam because condensation is a problem.:Pair (for Left and Right) I did the power supply, ventilation fan, outlet and light fixtures myself with hanghang during my vacation to avoid Cost.
The final touch was the DAYTONA Sticker, which was a struggle.
Sticker is as thin as Vinyl Tape and cannot be applied all at once.
First of all, it is hard to peel off the reflective seal. It sticks and does not come off. I can only apply it while cutting it partially with scissors.
Fill a spray bottle with water and a drop of dishwashing detergent. Shake it well and spray it on the Garage while carefully applying it. Since air bubbles will form, the only way to get rid of them is to rub them out as you apply it.
Be careful not to pull too hard or it will tear.
I wanted to put a little more up and down, but I had to match it with Seal's upper hangers to make it Gap, so I ended up with an upper temperament.
Well, I was able to put it up, so that's good.
Is it durable?
If this were the case, I thought it would be more durable to ask a private seller on Yahoo!
Design is good
If you have purchased the Garage and are not confident about installing it, you may want to ask us to do so when you make the Garage.
View detail
Quite tense when pasting.
[How is it used?
Since the Tank and Seat are in close contact, the longer the ride, the more fine abrasions will appear on the Tank.
I bought this product to prevent that. 2 sizes, LargeSmall, 3 sheets in total, can be shaped with scissors.
How was your experience with it?
It is quite thin in thickness but seems to be resistant to abrasions. After making a paper pattern to make a similar shape to the contact surface, it can be cut along the pattern to make a shape that corresponds to the contact surface. However, while it is easy to cut, this Seat does not seem to be able to protect against sharp objects. Durability is hard to say at this point.
How did it compare to other products?
This is my first time using this type of product.
[Points to note]
I bought the one with luster and carefully applied it to a glossy tank, but it has a few air bubbles, and as noted in the notes, there are wrinkles where there are curved surfaces. It seems that you don't need to worry about it if the shape is simple.
View detail
Flexible but floats.
It was a soft Sticker with flexibility.
The adhesiveness is about the same as a regular Sticker etc., so it will come off quickly.
The surface has been degreased, but there is some floating.
The paste part of zx25r is pear skinned and does not adhere well.
It has to be a Type like Cover.
Size is also Small ....
View detail
Bad hole position in Bracket.
The position of the hole in the bracket was not good, so I could not put it on with a pop.
It looks like I need to widen the long hole in the Bracket or shave the Bracket.
I chose the latter.
I think the texture is quite good.
View detail
The perimeter...
There are too many excess white areas around the surface to apply it neatly.
Difficult. Cut and paste the excess
It is easier to apply the paste neatly.
View detail
To prevent scratches on the Tank Bag
I bought this to prevent scratches on the Strap of my Tank Bag.
Once removed, they can be reused by washing with water, but it will not remove even sand and dust.
It doesn't look very good either, so you may want to buy it as a trial when you buy a new car.
View detail
Just like the last Chinese one I bought!
It was exactly the same as the Chinese CarbonRadiator cover I bought before!
Especially on the bends, it's not transparent or clear, it's a slightly white and cloudy clear!
You're letting China build it!
From a distance, it looks fine, but it's Chinese! There are two places where the holes don't line up!
This is too pricey for me.
View detail
high
Good design. Easy to install with Bolt On.
But it's expensive!
View detail
Fits: YAMAHA YZ250, YAMAHA YZ125, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ250FX
I need a larger area.
I installed it when I bought a new car because it is standard that Wound enters around the tip of Front Fender by repeating the fall etc. in Off car.
However, when I entrusted the sticking to others, the sticking was not so good, and after a while, 50% of the Decal floated away due to the water of the car wash.
I thought it would fall off soon. I thought it would come off soon, but surprisingly, it stayed intact for about five years.
Eventually I peeled it off, but even then it came off easily without any weird tearing and feeling of Stress.
In that sense, the quality may be good, but I think the Design is a little too plain, and above all, the area of Decal is too small.
I feel that the same price range as Rear Fender and Swing Arm, which have about twice as many Seal surfaces, is rather expensive.
View detail
cheap
Cheesy Seal.
And yet, this price is a bit too high. I felt like it was a bit too much.
I haven't been able to put it on yet, but I doubt I'll be able to get it to work. It would be nice if there were more helpful installation positioning and such.
View detail
Fits: KAWASAKI GPZ750 Turbo, KAWASAKI GPZ1100 Turbo, KAWASAKI GPZ750 Turbo, KAWASAKI GPZ1100 Turbo
Poor accuracy
There is an overflowing character Although it is Copy of OEM, the quality cannot be confirmed until it peels off Masking I regret that I thought it was very shiny in the picture and was expecting it View detail
Sticker does not come off the Seat at all
The Design was as expected, but the pasting didn't work at all
I don't know if it's an individual difference, but no matter how many times you rub it on, it doesn't come off, and eventually you get your fingernails up and rub it hard So I managed to put it up
However, the Sticker was tattered in places and took over an hour of my time
Also, considering that the adhesive part of Sticker is so weak, there is a concern about the durability
It's a shame, because the Design was good
View detail
The color is different from the photo
The shade is orange, not yellow Also, the edge is not white, but clear
I wanted a white edge with yellow letters, so I used the Image It's a shame I couldn't do Custom
View detail
confusing picture
Quantity to see the picture of the product:2pc. Set with Quantity:Am I the only one who thinks it's 1 Set?
They sent only 1pc
It seems to be a very confusing product image
Be careful when ordering!
View detail
high
The seat was hitting the tank [Color] The Clear paint is scraping off, so I decided to put it on
I tried to cut and paste it, but it's still going to be Wrinkle
But the price is high for just Seat
View detail