Reviews
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
AKRAPOVIC AKRAPOVIC Heat Resistant Silencer Sticker
[How is it used?
Buy new Sticker, no-name ManufacturerExhaust System
I pasted it in the
Was the one you received as per Image?
World famous AKRAPOVIC AKRAPOVICSticker
How was your experience with it?
Cool!
[Points to note]
Re-paste will wrinkle, wrinkle, position in one shot
Decide and pithy! Let's stick it!
Because I peeled it off and reapplied it again.
Wrinkle is in (crying)
How did it compare to other products?
View detail
Wick Visual Bureau Wick MotoGPLogo Official Ste.
As one point, I bought it and put it up.
At a roadside station where we took a break during the touring
You look great!"
Parenthesis is a great Sticker!
It looks great on the Motorcycle!"
They called out to me, "I'm sorry, I'm sorry, I'm sorry, I'm sorry.
Feel the DNA of YAMAHA motogp TEAM
View detail
It looks better after adding Emblem.
Due to the long W800 two-pad, a shorter width Emblem was selected.
We wanted to install an Emblem with Large letters, but decided against it due to its long width, which would have prevented interference with the Ni-Pad.
It is not possible to attach Exactly without bending it slightly to fit the tank shape, but it is easy because it is soft.
I had a little trouble with the positioning of the two-pad, but I think I managed to settle on a good position.
View detail
I miss the colors and design.
Good old-fashioned color and design. View detail
perfectly
He said it would be better if there were both round and square designs. But I am satisfied. View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
The manufacturer's logo can be added to the seat!
When I reupholstered the Seat of my XE50, the HONDALogo behind the Seat was gone and I missed it design-wise, so I bought it to put my handmade Manufacturer logo in it.
Since Holy Equip specializes in VINTAGEOff-road, Logo's period consideration is perfect for creating a 70s-80s atmosphere.
This time I purchased the larger size, but it was Exactly in the LogoSpace at the back end of the Seat.
StencilSeat is applied to the Seat fabric and sprayed with Dye-Q to complete the process. It is important to make sure the surface to be applied is clean and the pitch is tight.
In that regard, I might want to use a more adhesive Material.
Nevertheless, it is nice to be able to lineup such a useful product at a low price.
View detail
Caution before applying!
I purchased the largest size Ninja letters to put on my helmet.
I was able to apply it without any problems, but there was a little air in it because it was applied to a curved surface (sweat), but that is acceptable.
Also, note that the cut lettering is a sticker that is connected to all other sizes, so it is necessary to cut, peel, and paste only the necessary lettering.
View detail
I knew it was too big.
I bought Red&Black to match my Gayety Red.
It matches well with the color of the car body, but it is too big and I was worried about where to put it.
Although I was aware of the size before I purchased the product, I regret that it was still too big.
View detail
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail
Motorcycle, of course, was used to Remake an old NotebookPC!
Material on the Tank of my beloved Ninja 250SL:I wanted to put a Carbon Style Line sticker on it, and also used it to remake my NotebookPC, which had become shabby after a lot of use. The result is very cool! Of course, you have to degrease it properly! No problems with wetting it or touching it and it doesn't peel off! View detail
Sticker tuning
It is good because it is attached to Striker parts. View detail
AKRAPOVIC's MonotoneVERSION
Motivation
I purchased this product because AKRAPOVIC's OEM RedSticker seemed too good for Monotone's Motorcycle.
Was the one you received as per Image?
The size is slightly smaller than the OEM size.
[About how to paste...
Ex-Sticker removal (was not reusable)
Treatment after peeling off (Beauty for the treatment of adhesive residue due to its strong adhesive)
Selection of the position for pasting
Removal of oil (with a neutral detergent for Beauty)
How did it compare to other products?
We were also interested in the horizontal VERSION.
[Others]
Three-dimensional Emblem would be cooler...
If the gray areas are painted with luminescent paint, the scorpion mark will stand out.
I think it is a cosmetic product because I was able to make it over with a small budget considering the price.
View detail
You can enjoy the atmosphere of a new car.
Decals are stripped except for vehicles with a high degree of originality.
You can enjoy the feeling of a new car just by affixing it.
However, in the case of a vehicle with a certain level of sophistication, only the decal is strangely beautiful and has a funny atmosphere.
View detail
BlackMotorcycle
Bought as MotorcycleDecal in Black, Stripe and Quantity.:I will put it up at Set! View detail
CT110 HUNTER CUB as Decal
Purchased as Decal for CT110 HUNTER CUB. I didn't expect CRF for Swing Arm to be Exactly.... I put it on after I fixed it with masti because it is divided into 3 parts. It looks good. View detail