Reviews
I miss the colors and design.
Good old-fashioned color and design. View detail
![[Xess] Original Sticker](https://img.webike-cdn.net/catalogue/images/13108/3-t_00103_TS.jpg)
perfectly
He said it would be better if there were both round and square designs. But I am satisfied. View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
The manufacturer's logo can be added to the seat!
When I reupholstered the Seat of my XE50, the HONDALogo behind the Seat was gone and I missed it design-wise, so I bought it to put my handmade Manufacturer logo in it.
Since Holy Equip specializes in VINTAGEOff-road, Logo's period consideration is perfect for creating a 70s-80s atmosphere.
This time I purchased the larger size, but it was Exactly in the LogoSpace at the back end of the Seat.
StencilSeat is applied to the Seat fabric and sprayed with Dye-Q to complete the process. It is important to make sure the surface to be applied is clean and the pitch is tight.
In that regard, I might want to use a more adhesive Material.
Nevertheless, it is nice to be able to lineup such a useful product at a low price.
View detail
Caution before applying!
I purchased the largest size Ninja letters to put on my helmet.
I was able to apply it without any problems, but there was a little air in it because it was applied to a curved surface (sweat), but that is acceptable.
Also, note that the cut lettering is a sticker that is connected to all other sizes, so it is necessary to cut, peel, and paste only the necessary lettering.
View detail
I knew it was too big.
I bought Red&Black to match my Gayety Red.
It matches well with the color of the car body, but it is too big and I was worried about where to put it.
Although I was aware of the size before I purchased the product, I regret that it was still too big.
View detail
I like White with a subtle Pearl.
I don't have any special impression on the sticker (laugh), but I bought it with my extra points simply because I am an AELLA fan and it is useless for non-AELLA fans (laugh). I don't like to put Stickers on my products too much, but I think Transfer Stickers with simple and small letters only are acceptable for me personally.
I had no expectations because it was just a Sticker, but when I saw the actual product. Nice job, AELLA! I'm going to put it casually in an inconspicuous place on my second son's 959 Panigale, which is full of AELLAParts.
View detail
Motorcycle, of course, was used to Remake an old NotebookPC!
Material on the Tank of my beloved Ninja 250SL:I wanted to put a Carbon Style Line sticker on it, and also used it to remake my NotebookPC, which had become shabby after a lot of use. The result is very cool! Of course, you have to degrease it properly! No problems with wetting it or touching it and it doesn't peel off! View detail
Sticker tuning
It is good because it is attached to Striker parts. View detail
AKRAPOVIC's MonotoneVERSION
Motivation
I purchased this product because AKRAPOVIC's OEM RedSticker seemed too good for Monotone's Motorcycle.
Was the one you received as per Image?
The size is slightly smaller than the OEM size.
[About how to paste...
Ex-Sticker removal (was not reusable)
Treatment after peeling off (Beauty for the treatment of adhesive residue due to its strong adhesive)
Selection of the position for pasting
Removal of oil (with a neutral detergent for Beauty)
How did it compare to other products?
We were also interested in the horizontal VERSION.
[Others]
Three-dimensional Emblem would be cooler...
If the gray areas are painted with luminescent paint, the scorpion mark will stand out.
I think it is a cosmetic product because I was able to make it over with a small budget considering the price.
View detail
You can enjoy the atmosphere of a new car.
Decals are stripped except for vehicles with a high degree of originality.
You can enjoy the feeling of a new car just by affixing it.
However, in the case of a vehicle with a certain level of sophistication, only the decal is strangely beautiful and has a funny atmosphere.
View detail
BlackMotorcycle
Bought as MotorcycleDecal in Black, Stripe and Quantity.:I will put it up at Set! View detail
CT110 HUNTER CUB as Decal
Purchased as Decal for CT110 HUNTER CUB. I didn't expect CRF for Swing Arm to be Exactly.... I put it on after I fixed it with masti because it is divided into 3 parts. It looks good. View detail
Can withstand high frequency water attacks
[How is it used?
? Weekdays from September 16, 2021 to November 8, 2023 to date.
Used by attaching it to a slippery water bottle of Ni Bird.
Always rinse with water after use
How was your experience with it?
It must have been exposed to running water (tap water) quite often, but no flaking has occurred yet.
Weather resistance is unknown as the Large portion is for indoor use.
The surface is between textured and silky.
Since it is relatively thin and follows curved surfaces well, wrinkles are not likely to occur even on curved surfaces if it is applied to Teinei.
How did it compare to other products?
I don't think I remember much about what I bought it for or what I put it on, and I don't think I'm comparing the two. Adjustment for shipping?
It is a product that can add a motorcycle element not only to motorcycle-related products but also to everyday products.
View detail
It is good!
I was looking for a Sticker because I like Michelin Tire, but I found an affordable one among many expensive ones!
I am wondering if I should put it on Motorcycle's Box or on the light.
View detail
Quality Decal
On reciept of the product it was well packaged andallin tact, could do with a application guideto help those who have not worked withdecalsbefore that said asmall amountofsoapy water and some alignment checks and they look great with a good quality edge so doesnt stand out that its a decal at all. Only note would be to keep nice and wet on fitting as can tear if not careful. All in all cracking price and good product with fast delivery as always from Webike. View detail
Parenthesis OK
I have been looking for a White color, English Sticker to put on my RALLY50 side cowl for a while. I just found it on Webike, saw the impressions and bought it immediately.
This is the first time for me to paste a long Sticker with a cutout type.
I decided to give it a try anyway. I prepared water mixed with a few drops of neutral detergent, but it seemed difficult to design. This time, I decided not to use water, but to cut the backing paper before peeling it off, position it with masking tape, and apply it in a single shot.
When the backing paper is removed, the cover is thin and the Sticker itself is transparent. You can see the position of the text by touching it. This seems to work.
The Cowl is slightly curved, so the Right Side is a bit skewed, but I managed to stick the Right Side.
But I got distracted by the position of the first "D" when I applied it, and the first "D" was on the round recess at the Screw and Wrinkle came out too.
The longer Stickers are difficult to make. It is possible to make it with Cutting sheet, but considering the time and price, I felt it would be faster to buy it.
I couldn't get it right this time, but if you can do it as well as the others, I think it's great. The font of White fits RALLY50 well.
If there is a Chance, I will repurchase and Challenge again.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
So that you can see in the dark.
I bought it so that I can easily locate it in dimly lit places. The price is also the price, so I guess it can't be helped that it looks cheap. I chose the color White and it stands out in dim light.
It is a pricey product, so don't expect too much.
View detail