Reviews
Installer's Decision
Prerequisite for description:OEM Grab Bar + Arch Long tail installation
good point
Long tail and OEMGrab Bar interference improved
A bad point
Spacer above the interference level, so it loses its function as a Pillion Bar. (There is not enough space between the long tail and the grab bar to accommodate gloves.
reference
If you want to keep the design and functionality of the Grab Bar, I recommend purchasing the Grab Bar from Archi.
In the combination of OEMGrab Bar and ArchiSpacer, the Manufacturer name (kawasakietc.) behind Seat is hidden by the Grab Bar.
View detail
I'm not sure how long it will last.
I got a used FAZE with this Rear Carrier.
However, about six months after installing the rear box, I casually looked at the motorcycle and felt that the position of the rear box had been lowered, so I looked closely at the carrier and found that the base that attaches to the motorcycle body had been torn!
I understand that the vibration of the motorcycle will put a load on the base because there is no support from below due to its shape, but I never thought that it would happen.
And upon closer inspection, it seems that it was originally re-welded several times with the same symptoms….
I removed it as soon as possible and looked for another Carrier, but there were no parts (including used ones) that would fit the unpopular Carrier, which had already been discontinued for more than 10 years. However, there were no parts (including used ones) that fit the unpopular carriers that had already been discontinued for more than 10 years.
I could not imagine life without the Rear box, so I had no choice but to purchase the same product.
Currently, every time I get in and out of the car, I remove the rear box and check the base, but this is not good for my mental health, so I am thinking of having a local ironworker add a support from below.
The design and texture are very good, so this is the only disappointment.
View detail
One more twist and it's excellent!
When I purchased and installed the handlebar grip, I replaced the handlebar grip with a rubber grip from For Motorcycle.
Now for the Review, the person who Tandem'd it said that the hand holding the Handlebar Grip hits the back, so in the summer, the driver's back heats up …w, but it doesn't seem gross if you wear a thick jacket and gloves. w
For those who carry children, it is likely to be safer to have it.
As a driver (MotorcycleUser), I struggle with the sensation of a hard object hitting my lower back while driving. It hurts a little. I would like to put a cushionetc. in between, but I can't because the sitting position is too far forward.
Quantity of Cushion:Pair (for Left and Right) If the Handlebar Grip is located on the backrest, it can be used as both a backrest and a tandem grip, and will be very useful.
I hope Manufacturer will improve it.
That said, the texture of the Stainless Steel part is good.
Also, when using the Center Stand or walking around pushing the Motorcycle, it is a different way of using it, but it can be quite useful.
View detail
heavy work
The welding distortion of the bracket was so bad that I had to forcefully insert the bolt by pushing and pulling the body and bracket and inserting lubricant. I thought it was the manufacturer, but the welding distortion of the bracket was so bad that I had to push and pull the body and the bracket, and forcefully put in the bolt by inserting lubricant. If you continue like this, there will be returns. I think it will cause trouble for the distributor as well. It's a shame because the paint, overall texture, and quality is good. View detail
Not well made?
It's only useful for lifting Rear.
If there is a BALI or Seat Bracket, you may need to cut it.
View detail
A little Accent on Tail?
Personally, I might be pretty unhappy with it!
I installed it on my JC92.
If you want to keep the OEM look, this is the right choice.
It is easy to install and you just need to plug it into the existing screw hole on the rail. It is very easy.
The strength of the product itself is the quintessential G-Craft. It's solid without looking like it.
However, it is unexpectedly difficult to hold because of Short Bar? If your fingers are a little thick, it is not much use because it catches in the gap between the bar and the Rear cowl.
It may be perfect for a kick rack to put your fingers on, but if you tandem for a long time, you will lose your grip.
When the Carrier is placed on the Rear Sets, it can be used as a fixed ground object.
As an overall evaluation, I can't recommend this product because its use is too limited.
If you like SMART design, this is the one for you.
It is not cost effective, so you should definitely consider carefully when buying one.
If you increase Coloring a little more, you can use it as One point, so how about improvement?
View detail
usually
The Manufacturer's packaging is crappy, even though it may have been shipped in a box purchased from the Manufacturer.
I put it in a bag and only had a Corrugated Ball, so when it arrived, the corners of the Pipe broke through both of the Corrugated Balls and it was not noticeable, but there was a Wound.
There is an unevenness in the rubber part that looks like paint dripping for the price.
Not worth the 10,000.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
How to use it as a spacer collar for the suspension attachment part?
I bought it because I want to use the Grab Bar in its original mounting position after lay-down
The hole you can't see in the picture is tapered inside I don't know why it is tapered and it is over 20mm long
Spacer collars of 14mm inside diameter are not available on the market, so I am very grateful for this I bought it, but I never used it and it became unnecessary parts
Please include details of the size and shape
We would like to see the collar sold in 14 inner diameter, 22 outer diameter and 20 length
View detail
Defective item
Purchase Sissy bar & Mirror RackSet for REBEL. Below, the problem point.
1, the mountain of the Screw cut portion of Sissy bar is crushed and Bolt is not closed.
2, welding of Sissy bar is sloppy and it is a mountainous mountain and Mirror Rack can not be combined.
~ Anxious points ~
3. When installing on the car body "Did you measure?" I feel that each Bolt is under impossible force.
Although I tried to return it but returned goods are also troublesome so I forcibly attached it. Each work below.
1, I thought that only the beginning was crushed, so I pushed through forcibly using electric drill.
2, shaved with GoldFile.
3, Wait a minute.
I think Style is nice.. However, since the rack is small, I will think about how to put the Homsen box.
View detail
Bad product
Quality itself is fine but the welding part is bad and Body and Base are Gap.
When I inquire, I do it by visual inspection, so Gap replies with an ordinary response.
I am amazed already when I heard this word.
Products of this company will be gazing at everything by visual inspection and you will probably sell the goods of course.
It is about MADE IN CHINA to weld with welding.
I will never buy the goods of this company again.
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X
The shape is good
CYGNUS X installed in Taiwan 5th term.
It seems that people who ride behind by installing this became comfortable enough to become sleepy ♪
I liked it with a nice look, but Crack started to enter Pad in the back for half a year.
I think it is due to ultraviolet rays because it was outdoor parking without Cover, but I was happy if the material of the epidermis of the back pad is more durable.
View detail
Building is the same as Chinese
I was expecting but I was sorry..
Until now I have used a lot of G-craft Parts and have not failed.
However, this time Large failed!
As shown in the photograph, welding is sloppy, around the welding is white discoloration.
The Instruction Manual is fairly tidy.
Use OEM of 5 LMONKEY around Tail in this Parts.
However, the three-stage Adjustable is said to be incompatible due to Blinker and others interfering other than the first one.
Since there is only one option in the end, there is no meaning of Adjustable.
Also, when installed normally, Blinker and Tail lamp warped up,
It looks like a Chinese cheap Tail lamp.
Since it can not be helped, I hit Base so that Tail lamp etc. become natural.
Thanks to hitting you made 2 stages of choice out of 3 stages.
So I made the position in the middle.
By the way Adjustable can not change the position of Grab Bar Body! Let's be careful.
So where is Adjustable?
Tail lamp and Blinker can be positioned back and forth.
In short, you can change the position considering Balance with Swingarm
(I misunderstood that Grab Bar could move (sweat) )
Moreover, the Bolt hole which holds the Tail lamp does not match the hole of Bracket of this product.
So I drilled Bracket for this product.
After all it will be less than an hour if installed normally,
It took me three hours with full of machining (sweat)
By the way, Frame of the mounting car body is AB 27.
Is it impossible to attach a pon to this car body?
Anyway it's expensive - Making is complicated - No machining and no good place!
Was this a difference in my senses, I thought if the bar itself was a bit thicker, it was pretty slim.
This is the difference of my feeling so I have not done it to MinusPoint.
☆ is two with Brand effect, Others is an evaluation saying nothing.
In this case it's good for Chinese (Lol)
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Although the object for ZEPHYR750s was purchased, it exchanged for the different thing except Bar's portion. It should have purchased independently from beginning.
Although the object for ZEPHYR750s was purchased, it exchanged for the different thing except Bar's portion.
It should have purchased independently from
beginning.
View detail
It is a product made from "hurricane" a rubber volume for all black & grip part. Although I thought an assist grips with a small hook is enough from the first, as I knew its high practicality and if it was a black bar on a black motorcycle, I thought it m
It is a product made from "hurricane" a rubber volume for all black & grip part. Although I thought an assist grips with a small hook is enough from the first, as I knew its high practicality and if it was a black bar on a black motorcycle, I thought it may be inconspicuous, I bought it. When I attach, -it is not conspicuous. The appearance may also become an accent appropriate for the middle aged. Although I would like to have the seat bag of a big size during this season, if this tandem grip is used, the fixing belt of a longitudinal direction can be used, and the position protruded into back from the seat can also be stopped. It's delicious. But there is one problem.... The genuine assist grips is not attached. You have to remove. Not the assist grips itself but the hook was convenient. Though the bag was good well, hanging without a net or hook was useful. What is necessary is to attach a hook to the net side and just to hook on a tandem grip. If it can be fasthened together, it would be five stars! View detail
Time started attaching considerably. If it attaches, it will become difficult to close a sheet. For adjustment of that, it bent forcibly by itself and attached. If it attaches, a style is also good and very convenient!
Time started attaching considerably.
If it attaches, it will become difficult to close a sheet.
For adjustment of that, it bent forcibly by itself and attached.
If it attaches, a style is also good and very convenient!
View detail