Reviews
Fits: KAWASAKI ZEPHYR750, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400
good but a little big
Good quality, seems to be a bit big when installed on the bike. A picture with the bar installed on a bike included in the offer would have been helpful. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z650RS
The rear armrest with both beauty and practicality!
Before buying this rear armrest, I installed the original specifications of the side armrest-because I think the polished stainless steel or black rear armrest will make my car look too old. But after actually using it for a period of time, I found that the side armrest was of no practical significance! Yes, the side armrests are too low when the cart is pulling, and it is not easy to use force, and for the rear passengers, it is also not reachable because the position is too low! Until I found this blue-burned titanium rear armrest on WEBIKE: it is so perfect! Sturdy, lightweight and very practical, but also has a very individual appearance! It can also echo with the blue-burning titanium exhaust pipe end and end! The only downside, I think the price is a bit expensive--! -------------------------------------------------- -------- Before purchasing this post-handrail, I installed the side armrests of the original specification-because I think stainless steel polished or black rear armrests will make my car too old. But after a period of use, I found that the side armrest is unattractive! Yes, the handle is too low in the side of the cart, and for the rear passengers, the location is too low enough! Until I found this back-of-armrest after Webike: it is so perfect! Sturdy and very practical while having a very personal appearance! Also able to echo the tail with the titanium alloy boil blue exhaust pipe! The only shortcoming, I think the price is a bit expensive--! View detail
Mmm.
If you don't like the Tandem grip with the carrier, this is a good choice, but the price is too high. I used a 40mm M8 bolt to attach the Plate to the Motorcycle, and used the included bolt (there is a long one and a short one, and I used the long one) to attach the Plate to the Grip, because the Plate's hole is cut with a screw. I used Nut and Spring washer (Washer is not included) to fix it. View detail
Tandem to reinforce SeatBack.
I bought it because I love the design of the bike when I put Tandem grip on it.
Installation
It was easy for an amateur to remove the Tail cowl. The only thing you need to be careful of is not to damage the bolt and not to break the cowl side bracket.
Quality:Made by HURRICANE, so the quality is perfect. Also, the part that people actually hold is made of rubber-like material, so it's not slippery, so you don't have to worry about it when you're riding tandem.
Good thing I put it on.
It's easy to hold the Tandem grip when you stand up the vehicle with the Style for RearMaintenance Stand.
I use the SeatBack for long touring, and the Belt is threaded through the Tandem grip for added stability. Also, the Tandem grip will prevent the load from shifting backwards.
It is especially useful in ? It is helpful and useful especially in the situation of ?
Concerns:Unfortunately, the Tandem grip is not designed to be attached to the seat, so the seat will be lifted slightly and there will be a gap. It is necessary to devise it by DIY etc. here.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
To fill in the gaps in Lay-down
It was necessary to make the Screw hole a long hole. Well, it's Reproduct.
The gaps in the lay-down have been filled, and I plan to paint it black.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
I think it's a good build.
The quality of the Plating is also good.
The Pillion Bar makes it easy to maneuver.
View detail
Fits: SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman, SUZUKI SKYWAVE250 burgman
Good for Driver and good to buy
As per Title, the person driving will be at ease during Tandem.
That said, he said that it would reduce the anxiety of the person doing the Tandem considerably, and that there were at least three places to grab it.
This makes it easier to keep the weight in the middle and not worry about the Corner slipping down.
By doing so, the stability is increased and driving is much easier with it.
I'm impressed.
I'm sure you'll have to remove the rusty Nut when you install it.
I tried spraying it with anti rust Spray etc.
I used a solid wrench set that cost about 3000 yen.
I am a beginner, but it was not difficult to install.
I recommend it.
View detail
It cannot be installed without it.
Mounting holes do not exist on the '21 MODEL, so installation is not possible. View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC
That was close.
I installed it on my DRAGSTAR400 that I use for commuting.
It took me about 50 minutes to get there and back, and within 3 months of use, both of them broke off from the body drilling part of the Bolt.
At the intersection on the national highway, when I was starting Blue at the head of the line, I heard a noise and when I looked at the back mirror, I saw a Sissy bar lying on the ground.
I thought it might be Screw, so I rushed to pick it up.
The diameter of the hole was too large, or the thin part was crushed.
I broke out in a cold sweat when I thought I might have hit the following car.
View detail
Stable KIJIMA!
It's called Tandem grip, and it's useful for holding luggage.
They look great, and the fact that they're made by KIJIMA is a relief!
View detail
Not well made?
It's only useful for lifting Rear.
If there is a BALI or Seat Bracket, you may need to cut it.
View detail
A little Accent on Tail?
Personally, I might be pretty unhappy with it!
I installed it on my JC92.
If you want to keep the OEM look, this is the right choice.
It is easy to install and you just need to plug it into the existing screw hole on the rail. It is very easy.
The strength of the product itself is the quintessential G-Craft. It's solid without looking like it.
However, it is unexpectedly difficult to hold because of Short Bar? If your fingers are a little thick, it is not much use because it catches in the gap between the bar and the Rear cowl.
It may be perfect for a kick rack to put your fingers on, but if you tandem for a long time, you will lose your grip.
When the Carrier is placed on the Rear Sets, it can be used as a fixed ground object.
As an overall evaluation, I can't recommend this product because its use is too limited.
If you like SMART design, this is the one for you.
It is not cost effective, so you should definitely consider carefully when buying one.
If you increase Coloring a little more, you can use it as One point, so how about improvement?
View detail
It is easy to install.??
The installation was super easy and smooth, but the instructions were WhiteBlack and hard to understand. View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400
It can be used for more than just Tandem.
I'm currently reverting to CafeSpec.→NORMAL style and enjoying Touring.
So I bought this one to see if there was anything that I could tie a string to because I had more opportunities to go out tying Back, etc.
good point
●The construction is solid, so it can be used as a substitute for a load-bearing Hook.
The simple shape does not interfere with the body image.
Of course, you can also use it for Tandem.
Easy to install.
A bad point
None
It can be used for luggage loading, tandem, and attachment, and I am impressed with the thoughtfulness of this part.
View detail
Daytona
The handles fit like the original! Perfect fit for fasteners. It is now convenient to move the motorcycle and hold on to the passenger. Everything is also packed at a high level. Thank you ------------------------------------------------- --------- Handles stood as the original! Ideal came on fixture. Now it is convenient to move the bike and keep passengers. It packed and all at a high level. Thank you Powered by Google Translator View detail
How nice!
I'm very happy with the way they turned out! It was very easy to install, just pop it on! View detail
Fast delivery. Good quarity. Nice chrome. Did not install it yet but everythings looks great. Height 20 inches, wide 8 inches View detail
Fits: KAWASAKI Estrella Custom, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
Convenient
It works great and looks great. I've removed it now because it interfered with my Seat when I replaced it with the Kawasaki Reto Solo seat, and it was difficult to remove. View detail
Dress the back of the monkey elegantly
The bar dresses the back of the monkey very well and its assembly is very simple. To facilitate the assembly of the product, I also advise you to remove the rear skirt. This makes it easier to slide the bar above the rear lighting system and to pass the notches more easily on the fixing axis of the shock absorbers. -------------------------------------------------- -------- The bar dresses up the back of the monkey very well and is very easy to assemble. To facilitate the assembly of the product, I also advise you to remove the rear skirt. It allows you to slide the bar more easily over the rear lighting system and to pass the notches more easily on the shock absorber mounting axle. Powered by Google Translator View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
DAYTONAGrab Bar
The quality is as good as date.
I am not sure how long the durability of Plating will last.
I'm worried about the screw to stop the rear suspension because of the thickness of the bracket.
View detail