Reviews
Cosmo!
It will SUPPORT your hips.
It's easy to get the Cornering posture and
It also assists with Knee grip.
I am glad I installed it!
View detail
Sponge that I want to be sober.
Improvement of Ride QualityItems
I thought about making my own, but I didn't realize that such a thing was sold.
It was installed without any modification just by sticking it on.
Rubber and Sponge are difficult to form, so it is helpful to have something like this for sale.
View detail
No slippage!
Wet type is not slippery anyway.
The drawback is that it is too grippy, and if you don't give it firm action, you can't shift the hips with Seat.
View detail
rear seat cowl for a yamaha vmax 1700
i love it . i ordered the black one . i hope they have back in stock the carbon twill weave . if they do i will order also.its very nice very good quality. very hapy about and the shipping was fast.thanks webike. View detail
Used for Seat Cowl for Race
I purchased the 20? I am using it with the same Manufacturer 10? that I had in stock, making a total of 30? View detail
On the butt Hold.
[How is it used?
Used on a YZF-R25 with Saitaniya's Full Cowl for Race.
Was the one you received as per Image?
It was exactly as shown in the Image. I was torn between 20mm and 10mm thickness, but 10mm was the right choice!
Also, since the elasticity of Sponge is quite high, processing with Cutter may be a little difficult.
Roughly cut with Scissors, and then trim the corners with File for a clean finish.
Was the installation difficult?
It's that simple. Simply degrease the surface to which it is to be affixed and stick it on.
How was your experience with it?
With my body, YZF-R25 is a little tight, and my buttocks hit the Seat Cowl when I get down in Straight, etc....
If it is not attached, there is still no sense of Hold and it gives Damage to Cowl.
Therefore, by installing Seat end, this problem was solved.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
None in particular. The adhesive is very strong, so once it sticks, you should assume that it is impossible to fix.
Make a pattern on a cardboard or print paper, and cut the paper accordingly.
You can also use masking tape or similar to mark the surface in six places before attaching.
I think there will be few failures. Please note that if you try to forcibly peel off the paint, it will take away the entire coating.
View detail
Magical Racing single seat cover brings the car closer to the imitation racing single seat style
Magical Racing single-seater cover is suitable for CB400SF models. It makes it easy to change the racing style to imitating racing single-seater. Especially with the CB400 V3 tail-up design, it is very beautiful. The single-seater cover can be disassembled and assembled according to daily riding needs. Convenient, recommended to you who like to imitate racing single-seater style! ------------------------------------- --------- Magical Racing single-seat cover is suitable for CB400SF models, can be changed to simply let the car competitive single-seater racing style imitation, especially with the carryover design CB400 V3 is very good-looking, single-seat cover can disassemble very in accordance with the daily demands of riding convenient and recommend it to single-seater racing simulation like your style! Powered by Google Translator View detail
Seat rubber with a good bite
Frequently Asked Items
What made you decide to buy?
Seat Cowl for Race by S2Concept comes with a special Seat base, but the surface of the base is very slippery and the grip is not very good. I thought it was easy to use, but if there is no grip feeling, it's the end of the world. I decided to replace it with Seat rubber of Paste Type which is often used.
As there is no seat rubber of special shape, I cut the Universal Product and used it. When I asked my friends, they said that the Wet type made by Magical racing was good, so I tried it this time.
How was your experience with it?
The surface of the seat is more Gel-like than Dry type. I was wondering how this slimy feeling was in the bank, but after using it, I didn't have any uncomfortable feeling and the seat didn't slide and was biting firmly.
Was the installation difficult?
It is not difficult to install it because you only need to apply it with Double-sided Tape. But it is necessary to cut it to fit the Seat Cowl because it becomes a Universal Product.
【Please tell me the installation point and hang】
This Wet type is quite sticky, so when I tried to cut it with a cutter, the cut edges rattled. It's better to take the mold with the backing paper beforehand and cut it on a flat surface.
It was pretty ugly, especially when I used Cutters to drill the Bolt holes.
[Was the Instruction Manual easy to understand?
None
[Included Parts:were they on?
There is no particular problem, just peel off the backing board and stick it on SeatBody because the Double-sided Tape is stuck to SeatBody from the beginning.
[Others]
The rest is a matter of durability, but I think I will use it in the future if it will last one Season. The thickness is 10mm, but when it sinks like Gelzab, Seat height feels lower than the feeling because it sinks like Gelzab when it actually sits.
View detail
Used for small details
I didn't purchase it for use on the entire seat.
I use it by cutting it into a part of the seat.
The entire seat can be purchased as a special product and used as it is to avoid wasting cuts.
View detail
Nice grip on the seat!
While Dry and Wet are available, I chose Wet
Since it's universal, you'll need to mold and cut out the Seat shape yourself
The Grip feeling of the seat is perfect It grips as it absorbs and is not slippery, so you can concentrate on riding
View detail
It would be nice to have it
the cowl is Saitaniya Cut the shame because it was too large The thickness is 20mm, but I think 10mm is good enough I think 10mm is a good enough thickness
The feel of my buttocks felt more Hold after using them I'm going to try the 10mm next time
The price is cheap, so it's good to try VANVAN with Double-sided I think that it can be substituted for Spacer because it is a tape machine
View detail
It grips me tremendously
seat base is Saitaniya, but it is not I made a mold of the original Seat rubber and cut it out with scissors Even so, I was able to use it for fitting the inner thigh part because there was quite a bit left over
Grip is not a half bad feeling I ran the Tsukuba 2000 practice run, but I was able to run without slipping
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Parenthesis good
I was prepared for the holes to be misaligned, but I was able to install them without any processing
To avoid direct contact with the body of the car, 3mm Spacer is included, but it floats quite a bit as shown in the picture It is necessary to change to another thin one, or to put a protective Seat on the body of the car to prevent scratches It looks better without Spacer
As others have said, the LHooks on the front side are just caught on the Screw It's a bumpy ride It won't come off, but we'd better take action on this as soon as possible
Since the apex is lower than the OEM cob, the loading capacity is slightly lower than the OEM cob However, it doesn't bother me because it is Large Because the lid is also attached, the contents will not fall out
When you remove the OEM cob, you can place it gently on the ground and it won't be scratched, but you can use it on the Seat to prevent it from falling off There seems to be no other way to put it in …?
The good thing is that my car becomes the best parenthesis It is enough to satisfy me
View detail
Singapore user
Received item in nice good packing. and also it fits on my CB400SF nc42 revo. Simple to install and drill 2 small hoels on the seat body steucture. View detail
OEM Replacement
The OEM stuff is torn up due to deterioration! I thought about playing it, but I changed it to this type that grips firmly
It's a simple job to install it with the attached double-sided tape A strong Double-sided because the edges were floating due to a little rounding I changed to Tape and stuck it on
It looks better than a tattered stone and has a neat, race ish feel to it
I actually installed it just for the look and feel of the car, but it's solid on the Circuit It's more effective than I thought it would be with the stuff that grips my buttocks
The thickness of the Grip is perfect and it doesn't get in the way and is useful when you need it
How is the durability because the material is hard Sponge? However, it is inexpensive, so when it is worn out, I think it is enough to renew it with a new one
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Easy to install, looks great, and the price is Reasonable
When I changed my white busa to InitialD's panda color, I got a lot of attention and I was often photographed I've been asked to let him It's a bit old (=PωP) no View detail
Recommended for RacerMotorcycle
【What made you decide the purchase?】 Because I did not have any exclusive items for use in RacerMotorcycle, I chose this
【How was it actually used?】 The texture was very good. It's very hard to slip and very good.
[Is there anything I was disappointed about?] There was not a problem in particular.
【Hope for Manufacturer - Please tell me if you have any improvement points】 If you say it is strong, you should know the detailed dimensions in advance.
【Have you compared items?】 I studied various Seat rubber but I chose this because I heard this acquaintance of Rubber of Wet type is good.
View detail
It is easy to process and paste, Recommendation
OEM's Seat End Pad flew away while driving ?? (Lol) As it disappeared, I decided to purchase this. Cut little by little with Scissors or Cutter and finally complete with File and Paper. Pasting is easy with with Double-sided Tape.. View detail
Introduced to add gow to Cowl and take Balance
By attaching Large type Cowl, we made it worn around behind and made this product easy to install. The delivery date took about two months for Production to order, but the texture is high. Bolt-on attached to Bolt on the Seat side, Fitting was also worried, but installation does not hurt Cowl comes cleanly. Once, I use protected tape in protection inside Cowl.
It is perfectly Image-like because Volume comes out considerably.
However, the amount of gold will be pretty. Because it is Carbon, it can not be helped,
I think that it is easy to introduce it if it is a little cheaper.
View detail
It attached so that dress etc. might rub against the Works-type V sheet of a Silhouette Japan and a crack might not be attached to paint application. Although the adhesive strength of the double-stick tape which shines just also makes slightly weak mind a
It attached so that dress etc. might rub against the Works-type V sheet of a Silhouette Japan and a crack might not be attached to paint application. Although the adhesive strength of the double-stick tape which shines just also makes slightly weak mind a flesh side by a standard [ for ] one, it is a cinch at the purpose called crack prevention. View detail