Reviews
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200CX R100 ROADSTER, HARLEY-DAVIDSON XL1200NS Iron 1200, HARLEY-DAVIDSON XL1200R R100 ROADSTER, HARLEY-DAVIDSON XL1200V Seven Tee Two, HARLEY-DAVIDSON XL1200X Forty Eight, HARLEY-DAVIDSON XL1200XS Forty-Eight SPECIAL Knife, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON XL883L Low, HARLEY-DAVIDSON XL883N Iron 883, HARLEY-DAVIDSON XL883R
Arrangement doubles the charm! Don't you agree?
It is the same Vertical type Seat as the Single Seat I am using now, and I love the design!
I am sure that a little more Arrangement will also improve the Parenthesis even more.
View detail
great seat cover
seat cover fit great and loops over each end of seat for easy installation. No matter how much stretching and how many staples I used, there's a couple wrinkles.The color looks good, but doesn't match OEM. It's a little darker.Lots of grip ! It took a couple days at the to get used to it. Night and day difference from stock.Use 6-8mm staples when you install or else it doesn't stick View detail
Fits: HONDA ADV150, HONDA PCX, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA ADV160, YAMAHA NMAX, YAMAHA NMAX155
Effective in rainy weather and midsummer
[How is it used?
In use on NMAX 155.
When I ride in the rain, the seating surface gets very wet, so a friend of mine recommended that I purchase one.
Was the installation difficult?
It's very simple
Simply follow the instructions in the Instruction Manual to cover the Seat and fasten the back of the Seat with Magic tape.
The markings are also provided so that the front and back will not be installed backwards.
How was your experience with it?
I got lucky (?) the day after I installed it. It was a rainy day, but it worked!
The ride was comfortable with no uncomfortable wetting of the seating surfaces.
The improved ventilation will also reduce the heat of the Seat in mid-summer, which we will experience a little later in the year.
There is no movement of the mesh cover during driving, which is good.
[Was there anything that disappointed you?
It's not a disappointment, but I can't wipe the Seat without removing it each time, so it looks like it will get dirty inside if left unattended to some extent.
Perhaps due to the Belt fastening at the back of the Seat, closing the Seat now requires more force than before.
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125
The quality of the product itself is good.
It is fastened with a string.
If you tighten the strap in the wrong direction, it may tear.
When tightening the strap, be careful not to tear the opening.
The cushioning has improved and the quality of the product itself is good.
I would like to recommend it to anyone who feels burdened by fancy, genuine sheets.
-------------------------------------------------- -------- It is fastened with a string. If you tighten the strap in the wrong direction, it may tear. When tightening the strap, be careful not to tear the opening. The cushioning has improved and the quality of the product itself is good. I would like to recommend it to anyone who feels burdened by fancy, genuine sheets. Powered by Google Translator
View detail
Seat belt
The design of the Bracket is better than that of the NORMAL Belt, with more decoration. View detail
Fits: HONDA CC110, HONDA CC50, HONDA CT110, HONDA CT125, HONDA CC110, HONDA CC50, HONDA CT110, HONDA CT125
Very cool under the buttocks.
After parking under the blazing sun, it is sometimes uncomfortable to sit on the Seat because it is so hot, but this Mesh cover helps a lot. The MeshMaterial itself does not hold that much heat, so you don't feel it as hot.
Besides, once you start running, you will feel very cool under your buttocks because the wind will be blowing through the 3D MeshMaterial in a nice way. It is too cool when the temperature is low. It might be better not to use it in spring and fall (Lol) Of course, you'll have to leave it off in the winter.
Note that MeshMaterial is more slippery than SeatMaterial, so the holdability of the buttocks will be a little lower. Also, since it is 3-D Mesh, it is thicker and the seat height is about 2 to 3 cm higher, so please be careful about the footing.
Also, Seat shape and the shape of this product. (circular) is not Fit, so some may be bothered by the feeling of doubling up at the aperture on the front side of the Seat when it is covered.
View detail
Fits: HONDA CT125CT110 HUNTER CUB
It is convenient for what it is!
When opening the Seat of the CT125, you must twist the key with the Right hand while raising the Seat with the Left hand.
It was surprisingly difficult to operate, but once I changed to this, the problem was solved!
You can do this by adding a Spring to the OEM Hinge, but the OEM Product has a Shaft welded on, so you need to take this off.
Also, since there is no suitable spring, we need to add a spring from another car model.
Once I realized it would be a hassle, I purchased this one that can be popped on.
It is a good price, but I think it is well worth the price because it is well made.
View detail
Bounce Spring does not come on.
Design is Well, I guess that's about it." target
Personally, I like most of them, but I don't think they are very cool. Also, the flip-up spring, which can be used to fully open the seat after installation, which was available with the Normal seat, does not work with this seat. The plastic part of the hinge (integrated with the helmet box) was broken due to excessive force on the spring. So I had to replace the Helmet box at the same time as the Seat. The comfort is not as good as the NORMAL. It is claimed to be lowdown, but it is not so different from NORMAL. The quality is high. The installation is very easy. I think the accuracy is high and there is no wobble.
View detail
Easy to reupholster.
[How is it used?
We received an XR250 in a very dilapidated state and are in the process of restoring the functional parts and exterior.
It has been a long time since the production ended, and there were not many choices of Seat fabrics for different car models, but ALBA had a lineup for XR, which was a big help.
The purpose of use of the vehicle was unclear because it was given to me unexpectedly, but I was told that a junior friend of mine who enjoys playing in the mountains might be able to ride it, so I decided to use it for both daily riding in the city and playing in the mountains. A normal passenger vehicle." I tried to keep the following in mind.
How was your experience with it?
Even though it is a car model specific Seat Cover, is the price slightly higher than ALBA's other Seat Covers? I thought so, but there are not so many choices...
The construction was solid and we were able to finish the seat upholstery without any problems.
The thickness of the fabric seems to be as thick as OEMSeat, so durability can be expected as long as there are no protrusions or blades to cut into the fabric.
Perhaps because the fabric is too new, the surface was slippery during the test ride after the work was completed, but we believe it will settle down as we ride it.
How did it compare to other products?
Nothing of note, good or bad. OEMSeat Cover parallel." It's like
I have no complaints as this is exactly what we were aiming for with this Seat reupholstery job.
[Points to note]
This is an easy task compared to Universal Product's Seat upholstery since the product is three-dimensionally sewn for the car model. In fact, it may be more troublesome to remove the old Seat Cover.
As a personal tensioning method, I first fasten the front and back of the Seat with Tucker, loosening the tension a bit.:Pair (for Left and Right) Quantity at the time of the stakeout of the:Pair (for Left and Right) The tip of the sponge should be stretched evenly so that there are no gaps in the sponge, and the tip of the sponge should be stretched along the seat sponge without wrinkles to obtain a satisfactory result.
Other items that would be helpful
The deciding factor in the purchase
As inexpensive as possible. It just feels normal." We chose the Seat Cover of
It is also important to be able to use the points you have accumulated at Webike.
[How is it used?
We consider that it can be used without any problem from playing in the mountains with friends to day-touring.
【Included Parts:presence or absence】.
A piece of skin for SeatBody, a tandem belt, and an instruction manual with simple tensioning instructions are included in the quantity.:Set
In this case, the Rear Carrier has a handle, so the Tandem belt is not attached.
[ITEMS TO BUY TOGETHER
Tucker (Stapler's slightly larger size) to hold the Seat fabric in place on the Reverse side of the Seat Base, and a shorter core for the legs (because the longer legs would poke through to the surface at the SIDE of the thin Sponge).
If you want to emphasize waterproof performance, you may want to cover the area between the SeatMaterial and the outer skin with Vinyl before applying it. If you do not want the skin to gap while running, it may be better to apply directly to the sponge without using Vinyl, and you should prepare a SiliconCoking agent to apply to the reverse side seam of the SeatMaterial.
Opinions and requests to Manufacturer.
If possible, several color variations would make it easier to match the car body color.
We would appreciate just having a set up for each car model, so please continue to sell as much as possible.
View detail
Fitting is also good
I used to install the Blinker using the hole in the Seat Bracket for Side Cover because I use Posh's Blinker kit, but I chose this product because it was a type that can be installed on the Side Cover. The Blinker can be re-installed in the same position. The footing is better than the OEM Seat and it does not slip anymore. View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARestore
I bought it used and the OEM Parts were badly rusted, so I replaced them with new ones to prevent rust. It looks good. View detail
Fits: HONDA XLX250, HONDA XR200, HONDA XR250, KAWASAKI KL250, KAWASAKI KLX150, SUZUKI DF200, SUZUKI SX200, SCORPA T-RIDE 250F, HONDA CRF150R, HONDA CRM250AR, HONDA CRM250R, HONDA FMX650, HONDA SL230, HONDA XR250 BAJA, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230, KAWASAKI KL250, KAWASAKI D Tracker, HONDA XR250
I appreciate the affordable price.
[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.
What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time.
View detail
Fits: Others , Others , Others , Others , HONDA CROSS CUB, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA monkey, HONDA Super Cub 50, HONDA Super Cub 50, HONDA little cub, HONDA little cub, HONDA 12VMONKEY, HONDA CT125, HONDA SUPER CUBC125
With this 4, I can also think of bean paste as a sweaty person!
[How is it used?
I have bought and installed it before, and mine is an indispensable Cover!
Was the one you received as per Image?
Yes, it was exactly as shown on the Image.
It's easy to use, no heat, no shift.
How was your experience with it?
I installed it and ran it immediately.
I was afraid that the seat height would be raised since it is to be placed over the normal seat, but I had no problem.
[Points to note]
The size is a little bit limited, or rather Exactly, so I added it while pulling it out.
No movement after installation (no Gap), no problems, and I'm sober.
How did it compare to other products?
I bought only this product without comparing other products.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Fits: SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S, SUZUKI GSX750S1, SUZUKI GSX750SS, SUZUKI GSX750S2, SUZUKI GSX1000S, SUZUKI GSX1100S
KATANARefresh
Replaced by KATANARestore, no problem with OEM parts shape. View detail
Cheap, thin, but usable.
[How is it used?
This 1997 SEROW225WE, which I acquired two years ago, was purchased by an acquaintance of mine six years ago, and I had done a fair amount of repair work on it when I bought it six years ago.
After receiving it the year before last, we prioritized restoration from a functional point of view, but the Seat Cover, which was originally on the verge of unraveling because it had been used for playing in the mountains during that time, had reached its limit.
I searched Webike for Seat fabric to reupholster. MotorcyclePartsCenter. There were only two products available, both in the same color scheme as the OEMSeat type, and I was torn between buying one or the other, so I decided to buy both because they were cheaper.
This time The cheapest one (price at time of purchase:2,830 yen) Review of.
How was your experience with it?
When it was listed in the product section. The higher one is shiny. The cheaper one is WITHOUT Gloss. The actual product that arrived was semi-glossy and I could not tell the difference just by looking at them. When I touched them, I found that the more expensive one (SY107V) had slightly thicker fabric and seemed to last longer than the less expensive one (SY107).
How did it compare to other products?
Incidentally, as of February 2024, YamahaOEM's Seat assembly. is no longer available, but is still available in the Seat CoverSingle Item (17,380 yen).
As expected, the fabric is thinner and less durable than YamahaOEM's Seat fabric, but at this price, it makes enough sense.
[Points to note]
As mentioned above, the Seat fabric is thin, so if the Tucker is driven in halfway during reupholstering, there is a risk that the fabric will break from the Seat Base.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
I usually post PartsReview with hanghang and use my WebikePoints that I have saved up, so I can buy them at Webike. SEROW225. The only two types of Seat fabric for reupholstery for the new car were available in MotorcyclePartsCenter's lineup.
(Universal Product's Seat fabric was not an option because we wanted to use the same color pattern as the OEM.)
[How is it used?
It is used in various Situations from street riding to mountain play.
【Included Parts:presence or absence】.
Only one Seat Cover, no Tandem belt was attached. To begin with, Tandem belt has not been attached to SEROW225W since 1995 (4JG2), even OEM, so there is no problem.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker, a slightly larger version of Stapler. and short-legged core.
Vinyl bags of Large size (Vinyl bags for Garbage collection and Large sturdy) are available for each person as a measure against flooding of the seat sponge, so those who use these bags should purchase them while they are at it.
In my case, I do not use Vinyl, but I apply SiliconCoking agent to the seams on the reverse side of the Seat fabric to prevent water from seeping through the seams.
Opinions and requests to Manufacturer.
In these days of daily whispers of skyrocketing prices, it is very nice to be able to get Seat fabric at this price.
Please keep up the lineup continuity.
View detail
I used it on Cushion for a chair.
This is the third time I have used this Seat sponge.
At first I used it to improve the OEMSeat of the Initial Model Grom, which was a pain in the buttocks.
Reference https://imp.webike.net/diary/205834/
The second one. Torture Seat" The Seat of KLX125 (Initial Model) was used to convert the Seat to a wider Seat. It took a lot of time and effort, but the result was satisfactory.
This is https://imp.webike.net/diary/205834/I showed how to do it in
The third time I used it to improve Cushion for chairs.
The Cushion for home use has a very soft and thin Sponge, so it quickly becomes floppy.
Therefore, we decided to substitute the Sponge with this product, which is a urethane product for motorcycles.
First, take out the Sponge inside from the Cushion.
Shape the eyeNetSponge to that same shape.
Cutter knives are often used to cut urethane sponge, but it is always hang to use new ones. If the teeth become even slightly rounded, the sharpness will deteriorate.
This time I cut it with Large type scissors because it is thin.
Two sheets were not enough, so I also used leftover eyeNetSponge that I had saved.
Bond is used to attach eyeNetSponge.
When the shape is the same as the original Sponge, place it in Cover to complete the process.
Feeling of use
Hmm? Better, but still not good enough.
Songe lacks thickness.
A thickness of 2 cm does not seem to be sufficient to create a comfortable seat that wraps around the buttocks.
If the thickness is 4 cm, the seating comfort would be satisfactory.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
Too slippery.
Crf250rally50, thank you md44 for your help, I also purchased it for the proper Position
The material of the outer skin is rough non-slip fabric that sticks to the pants like magic tape, so I can't slide my butt on it.
Regular Seat fabric would have been even better.
I have applied Silicon spray as much as I want to help my butt slide, but it still gets stuck.
It is better to replace only the Seat cover.
I like the Seat shape.
View detail
Fits: KAWASAKI KLX125, KAWASAKI D-TRACKER125, HONDA XR50Motard, HONDA XR100Motard, Others , HONDA DAX125, HONDA CL250, YAMAHA XSR125
For Dax125
Installation was easy as I just put it over the Seat.
It looks good.
Mesh and breathable, so in winter my butt is cold. It seems to work well in summer.
Cushioning is also possible, but I haven't ridden it for a long time, so I don't know yet.
Since it was winter when I purchased it, I will remove it now and use it in the summer.
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Great sport seating position, good for city as well!
I am 175cm tall, and after installing the seat, I am able to stand on the balls of both my feet. WIth the original seat, I am able to place both feet flat on the ground. The raised seat makes me lean forward slightly more, reminding me to grip the tank with my legs rather than leaning on my wrists. Seating position is more sporty compared to OEM seat, i.e. sitting on top of the bike rather than inside the bike. Comfort is perfectly fine for street. If it is too harsh, perhaps you can adjust the compression and rebound settings on rear shock. Installation is easy - you will have to partially remove the side fairings to access some screws. It is NOT a drop-in replacement. Access to battery and fuses will be inconvenient after installing as you will need to remove fairing, screws and seat mount, before accessing battery and fuses. (It should not matter much but good to know information). Be careful not to strip the OEM bolts near the tank, they are very soft. Deduct one point as rubber seat provided has holes that are not very accurately cut, impacting the positioning somewhat. You might be luckier than me. Product shipped about 1 week earlier than estimated. Overall very satisfied. View detail