Reviews
Fits: SUZUKI Lets (LETS), SUZUKI Lets (LETS), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets basket (LETS Basket), SUZUKI Lets G (LETS G), SUZUKI Lets(LETS)
If it tears, replace it immediately.
SEA BASSLETS CA4AA Purchased to replace a tear in my H30 Seat due to age.
It is inexpensive to buy, and if you see signs of tearing, you should replace the Cushion's Urethane before the rain gets to it.
Unlike OEM, there are seams everywhere. OEM is completely seamless.
If there is concern about flooding through the seams, we recommend replacing the entire unit with OEMSeat.
Some prep work is required to increase Waterproofness.
(Seams are treated with Coking from the back, wrapped with WaterproofSeat and then installed. (The last step is to wrap the seam with WaterproofSeat and apply WaterproofSpray.)
The product is folded upon arrival, so we would like time to stretch it a bit.
You may want to schedule enough time to hang the aforementioned seam Coking until it dries.
Minor wrinkles in the product will disappear as it is pulled when applied.
You may notice Large cross fold creases as shown in the photo, but they disappeared within a week of practical use.
If the actual reupholstering process is followed as described on NTB's website, even beginners can achieve a relatively good finish.
It is for beginners because it is not a one-shot game and can be redone several times.
Even without an Air Tucker, a commercially available Gun Tucker can be used for hammering if pressed firmly enough.
However, be careful with the length of the wick leg; 8mm will cause it to penetrate and prick the leg.
It was just barely 6mm foot.
View detail
OEMOption products as expected
[How is it used?
I purchased this to convert a 22 Panigale V2 to Single Seat.
Was the one you received as per Image?
The machining accuracy is good, which is natural since it is a ManufacturerOEM Product, and although it is manufactured in Italy, this level is not inferior to that of FOR JAPAN MODELMANUFACTURER.
Back part is also minimal. [Color] It was nice that it looked like it had at least been painted clear. (Panigale's plastic parts are so bad that I feel like I'm being told to replace them with carbon parts if I have a problem with them, but this one was beautiful.)
Was the installation difficult?
The Tandem seat can be removed by simply removing 6 Bolts, and the Passenger Seat Cover can be installed with only 4 Bolts (Bolts can be reused). (Bolts can be reused).
The bolt holes are also very precise, so there is no need to worry about misalignment, etc.
How was your experience with it?
What originally stops at six wires becomes four, so there is no synthesis to the extent that it is distorted when moved by hand or force is applied. However, since it is not a place where force is applied, there will be no problem.
I felt that the design of Panigale was finally unified by the single seat, and I thought that the tandem seat spoiled the design.
[Included Parts:were they on?
The bolt used for installation is the one that originally fixed the Tandem seat, so there were no included parts.
[Was there anything that disappointed you?
None in particular.
If I had to say, price.
I didn't want to buy the stones at the list price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Easy when refueling
When installed, there is a significant gap between the attached Pin and Spring.
I was concerned about the Spring moving when the Seat is raised, so I fitted it with the Aluminum collar.
I think it would be easier when refueling if the Seat could be raised a little more.
Concept and texture are satisfactory.
View detail
![(COZY Seat) [COMP]](https://img.webike-cdn.net/catalogue/10054/76200_1_TS.jpg)
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R, KAWASAKI ZRX1200R
Parenthesis good?
Silhouette from the side is the best!
I ride my Motorcycle every holiday to sit on this Seat.
I thought the lower Seat height would make the knees tighter, but the Large is sturdy! (Height 170 cm, short legs)
The handlebar is also raised, so it is almost in a vertical position.
Instead, there are no more gaps than in NORMAL. (16 year old ZrX1200 DAEG) No complaints at all.
It was also very fast from the order!
View detail
It doesn't look like a Seat cover.
good point
The dedicated seat cover I have in mind is an image that is loose in some areas, but this seat cover from MORIWAKI is so tight that it looks like it has been reupholstered.
Even on a 200 km round-trip touring trip, there is not a single wrinkle.
Cushion is also so-so.
Since Motorcycle is Black, Color:I like it MATCH with Gray's Seat.
A bad point
Seat is slippery
I usually ride my motorcycle in Denim pants for motorcycles, and they are slippery, but I don't mind.
However, I'm concerned about the windproof, cold-resistant, rustling Pants for winter because they are quite slippery.
View detail
![(COZY Seat) [COMP]](https://img.webike-cdn.net/catalogue/11095/46886_TS.jpg)
Fits: SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400, SUZUKI GSX1400
Position is set and my hips don't hurt.
I had been using the OEMSeat for 18 years and recently my hips started to hurt, so I added a Cushion to it. It was the right decision ?It is cool and comfortable now, and I used to get sore after about 50km, but the other day I ran about 100km and it was Large sturdy. View detail
Comfort seat installed.
Replaced the front seat at the same time and it is very fluffy and comfortable.
The design is cool and I am satisfied with it.
Installation is easy and can be replaced with a simple push-in.
I wonder if the price is too high to replace the front and rear...
View detail
Fits: KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R 40th
I don't Tandem, so I installed it for looks.
When I purchased a 24 year old ZX-6R, I had no chance to tandem it with my previous Z900, so I took the plunge and installed a single seat and removed the tandem footpeg to give it a race-ish look and feel.
It is installed on the 40th anniversary MODEL as an OEMOption, and the color is said to be Lime green, the same as the KRTMODEL.
Fitting is very good only for OEM.
View detail
It can be installed on the '24 model, but I'm not sure if the effect is worth the price...
I wanted to improve the footing of my ZX-6R, which has a Seat height of 830mm, and I compared the images with those of the 23-year-old model when I switched to the 24-year-old model, and decided that they were the same. I was lucky if I could feel the effect of 10mm bean jam removal.
I'm not sure if I'm comparing the OEMSeat correctly since I've only used it for about 30km, but I didn't feel much of an ankle-less effect or improved seating comfort with the low rebound material incorporated.
However, the fact that the Lines are more curved with corners than OEMSeat makes it easier to transfer the feet.
To be honest, I think the effect on the investment amount may be disappointing, but it may be good to have for those who are clutching at straws to improve their footing!
View detail
Useful Items
I bought this because I had trouble avoiding documents every time I needed to store my helmet because of the size limit. It is an official Y's Gear product, so the fit and quality are perfect. If you are on Glyphus, you should buy it anyway! If you are on Glyphus, just buy it! View detail
Good design
The footing is a little better, and the design is good with the tuck roll. The cushioning is as firm as the OEM base. If the cushion material inside is a little softer and fluffier, I think my butt would be less sore on long distances. View detail
Single seat cowl
I didn't install it when I bought my new car because I didn't feel I needed it, but when I saw it installed on another car, I was attracted by its cool look, so I bought it.
I am very satisfied with the new seat and the new look of the seat is much better than before.
One of my concerns is that when applying the rear stand, I had to grab the rubber part of the Seat Stopper instead of the entire tandem seat, which is a little more difficult.
View detail
GelCushion
I bought DAYTONA's SupportGelCushion, which had a good reputation around me, because my buttocks hurt from Touring.
I went Touring after putting it on and it improved a lot.
It was nice to have less pain in the buttocks, even when touring long distances.
View detail
Thanks for the insanely fast response.
High seat on WR250R! I wish I had replaced it earlier.
Also, the speed of Shop's response! Thank you very much.
View detail
KF47.JK05 conformity check
I use a PCX to commute to work, and since the parking lot is not paved and the dust from the neighboring workshop was flying around, it was a hassle to buy a Body Cover. When I asked webike about the compatibility, they told me that they had not yet checked the new model, but I bought it anyway because I thought it would not be so different from the old model. When I installed it, the length direction was fine, but the horizontal dimension of the front half could not be folded inward due to the limit. The edge of the Seat peeks out a little if you don't hold it gently,
I am writing to add that I have used it for exactly one year. I hung it up, took it off, and folded it again five days a week, and after exactly one year or so, it started tearing from the seam of the pocket for storage. I hope it has been fixed.
View detail
Fits: HONDA CT125, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB 90DELUXE, HONDA SUPER CUB70DELUXE
Used in JA59
Installation is easy! Once you get used to it, it only takes a minute.
The texture is good and looks like OEMParts.
I haven't sat in it, but my wife says it's a solid Seat and it's safe.
Glad I didn't go cheap. (Sweat)
View detail
It got easier to ride
[How is it used?
It has been over 10 years since the vehicle was purchased and the Seat has deteriorated over time.
How was your experience with it?
...The bend in the knee is just right.
I no longer have to worry about contact with the footpeg when I put both feet on the ground.
View detail
Slim seat
[How is it used?
I was concerned about the footing when I rode with RenBarrelMotorcycle, so I bought the car before delivery and returned from the Motorcycle shop.
Normal seat, I replaced it as soon as I got home.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Easy to remove and replace the Rubber Bush from the Normal seat.
How was your experience with it?
Footing has improved a bit.
I have driven about 200 km since installation and so far no problems.
[Included Parts:were they on?
Seat only, so no Included Parts:.
[Was there anything that disappointed you?
There is none
View detail
Replace SR with WM's Semi Double Seat IV.
This is a replacement from DAYTONACOZYSeat, but the Seat height will be slightly lower.
The raised Rear makes it easy to check the Fitting position on the buttocks.
The seat feels soft and quite thin, so it seems hard to sit for a long time.
The space between the Seat and Tank (about 2 cm) is slightly empty, so if this bothers you, you may not want to do this.
We are bulking up with TankOffsetParts from Bore Ace, so the gap is about 1cm.
The bi-Ping gives a slightly softer impression, which may be to the liking of different people.
I had no problems at all with the Fitting of the installation.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 750
Bagus! BAGOSE Aluminum Seat Lock Plus for ZEPHYR750
It was a real itch that I could scratch, and I was able to fix it with MaterialUpgrading, a common problem with ZEPHYR. Thank you, BaGOOSE. View detail