Reviews
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fender Eliminator
The installation was not difficult, and I like the fact that the OEM license plate light is used! View detail
The service hole cap offers an attractive yet practical design
About quality and texture - The service hole cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The service hole cap offers an attractive yet practical design and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the finned camshaft cover from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the service hole cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to service hole cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the service hole cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
The engine cap offers an attractive appearance
About quality and texture - The engine cap from G-Craft is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The engine cap offers an attractive appearance and a simple solution when you are looking for a higher quality part when compared to the original that comes with the Monkey 125. Products to buy together - A key product to purchase to add a more attractive appearance to the Monkey 125 engine is the clutch cover plate from G-Craft tht adds something real special where needed. Difficulty of installation - The installation of the engine cap is a simple task that took 0.1 an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to engine cap to the left crankcase cover. Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and the engine cap is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the engine cap, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
My friend said I should change it because Parenthesis is bad, so I changed it ?????
I was not so interested in the dress-up because I thought that motorcycles are wonderful vehicles that stimulate our five senses, but my friend said that it would definitely be better for parenthesis if I changed the dress-up. I didn't feel much when I looked at it from the side, but when I looked at it from behind, "Whoa, Parenthesis is good." The slightly thicker MONKEY Rear tire looks good and pretty. View detail
Surprisingly good ?????
I'm not really interested in dress-up, and my theme was to keep the NORMAL cuteness as much as possible, but my friend told me that the tongue in the back is Parenthesis bad. View detail
GCraft is as good as it gets.
I like it very much
Also, if the price were lower...
View detail
Shim for M10Bolt is ideal for Caliper
This is a 0.5mm thick iron shim.
0.Since it is only 5mm, it is difficult to use it as a Washer unless it is a very special Bolt (e.g., Shim O.D. and Bolt O.D. under the neck are the same).
So what kind of use is it for?
The reason for this is that the caliper is offset by putting it in the mounting surface of the axial caliper.
Exactly for adjustment to bring Opposite Caliper to Center against Center of disc.
Almost all axial Calipers use the M10Bolt, so it should work for most car models.
There is no need for Opposite Caliper to be in the Center of the disc in the first place (Piston's output is Quantity).:Pair (for Left and Right) In addition, it is unlikely that the gap between the disc braking surface and the inner surface of the caliper will be so large that the disc braking surface contacts the inner surface of the caliper, so it is basically a self-satisfying part.
But... there are vehicles that actually Gap to the verge of contact...
In the case of my car, Yamaha TDM900, for some reason, the Right Side has a 3mm gap at the center, and I have adjusted it by adding 3mm thick extra-thick shims.
The other car, a Ducati 900SL, is a Large sturdy car...or so I thought...but it's not...it's a Quantity!:Pair (for Left and Right) Both are at 1.5mmGap.
I haven't changed anything or cut any part of the OEM in either case.
Limit contact is not made, so there is no problem to use it as it is, but I don't feel good, so I adjusted it with this Shim.
From the outside, though, you can't tell anything.
The Merit that Caliper gets from coming to the Center is besides feeling good. BrakeTouch gets better." There are also.
In theory, BrakeTouch should not change just because Caliper comes to Center, but the change can be felt quite clearly.
ProbablyQuantity:Pair (for Left and Right) I guess the Fee Ring will change for the better by aligning the amount of Caliper piston that is popping out at the
I can only assume so.
View detail
A light weight seat due to it's low profile and the narrow
About quality and texture, I can confirm that the quality is great and that the material used is a black synthetic leather with a black stitching to create a tuck and roll design for a custom looking Monkey. About the feeling of use, A light weight seat due to it's low profile and the narrow design. Coming in at 1385 grams compared to the original seat weighing in at 2590 grams. Products to buy together, Since this seat is a lower profile design then original it would be ideal to add a lower set of handle bars to your cart to be able to position your upper body lower to match the seat for the most comfortable riding position. Difficulty of installation, I can say the fitment of the seat for my installation was very easy due to the simple nature of the manufacturers mounting of the original seat which translates to how this seat also mounts. Cost performance and comparison with other products, Pricing of this product is great. You receive a beautifully designed seat made from great quality materials. More expensive then the same designed seat from Kitaco. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Monkey 125 G Craft rear Carrier Type 2
Got the item fast. Listed shipping within 3 weeks. got it less than the said date. Very Nicely Made heavy duty. Very Satisfied. Easy to install. View detail
strong, solid
Among the various chain guards of Monkey 125, it is an expensive product, so the material and quality are good. I'm satisfied with the second guard change. View detail
It's Wilde, isn't it?
I wanted a rugged Image, Wilde feel, so I chose this one, although it is more expensive.
A short Hexagonal Wrench may not be able to reach it.
It is my favorite as per Image.
View detail
gCraftCustom seat
Both feet are sticky and in my opinion, the position is good and I like the style very much. View detail
GCraftZ2Seat Cowl exclusive Club bar
As expected of GCraftExclusive Design, it fits perfectly and looks great, and I love it. View detail
This styled headlight guard compliments modern additions
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a mixture of silver and black anodised finishes. About the feeling of use, Some people may not like the modern style of this headlight guard but I was happy to take some of the original looks away from this bike with the key changes like the fender eliminator and exhaust system, so this styled headlight guard compliments those modern additions. Products to buy together, A part that goes a long way to tidy up the rear end is a fender eliminator and while adding a modern looking headlight guard a modern looking fender would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the headlight guard was very easy due to the simple nature of the install and easy access to the three mounting points to secure the guard with the included hardware. Cost performance and comparison with other products, The pricing of the product is good. You receive a headlight guard made from quality and light weight materials. There are cheaper options from other brands but non with this modern type of styling. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
OEM Parts should be sufficient.
It is just an L-shaped Bracket, so it could be substituted with the Home center Bracket. When I reviewed my equipment configuration, I no longer need it, so it has become a Guardian bell Bracket. The quality is not bad. View detail
It's a good look.
I am satisfied with the product exactly as I wanted.
It looked great and I couldn't stop looking at it!
View detail
G-Craft's Club bar
Design is good
Easy to install
Easy-to-hold shape
View detail
The service hole cap is not as highly detailed in it's finishing as the engine cap
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all silver anodized finish. About the feeling of use, The service hole cap is not as highly detailed in it's finishing as the engine cap mainly due to it's smaller sizing but the two parts still look fantastic together when compared to the original plain silver ones and add a quality finish to the engine cover. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the matching oil filler cap would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the service hole cap for my installation was very easy due to the ease of access and simple nature of securing the cap into the engine cover using just an spanner. Cost performance and comparison with other products, The pricing of the product is good. You receive a unique designed part made from high quality material with a matching finish. There are cheaper options available but this is well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Has highly detailed finishing and a unique design
About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with an all silver anodized finish. About the feeling of use, The engine cap has highly detailed finishing and a unique design when compared to the original plain silver ones and add a quality finish to the engine cover. Products to buy together, Other high quality parts to help improve the look of other original plain looking parts like the matching service hole cap would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the engine cap for my installation was very easy due to the ease of access and simple nature of securing the cap into the engine cover using just an spanner. Cost performance and comparison with other products, The pricing of the product is good. You receive a unique designed part made from high quality material with a matching finish. There are cheaper options available but these are well worth the money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail