Reviews
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
PMC Seat looks good but not most comfortable
The PMC Tuckroll seat looks great. It is very lightweight also. However it has a particular fit and for me was not very comfortable. It as a pronounced scoop in the rider's portion and it limits movement of the rider while compressing the crotch area. For a male the presure on the crotch is especially uncomfortable. The cover material is also a bit too slippery. I imagine it's good for waterproofing but while aggressive riding it slips. View detail
For those who really want to use the OEM Grab Bar
Installation is easy, and the design and product precision of the mount itself is well done.
After installation, the rear of the grab bar was lowered, so the gap between the tail cowl and the grab bar became narrower, making it less comfortable to use.
The OEM Grab Bar looks thinner and poorer relative to the vehicle than the OEM Tail cowl, although the difference is only slight.
I think it is possible to purchase this product only for attaching an OEM grab bar to a vehicle with ARCHI's long tail cowl.
I ended up purchasing the company's Long tail cowl-specific Grab Bar, which has now been removed.
View detail
The only color available is Silver.
[How is it used?
I bought it to add Accent while replacing the Plus screw that started Rust stopping the exterior of a pre-2000 vehicle.
In the past, there used to be a wide variety of color variations available from various manufacturers, but now they are rarely seen and the choice of colors has become limited.
Was the one you received as per Image?
The design of this type of aluminum spacer is common. FUJI TUBO type. The simple design with no bumps and no dents and the universal nature of the product made it very easy to use and just like the Image.
Was the installation difficult?
There is nothing difficult about this product, as it is installed by biting it in place of a washer when using a cap bolt.
How was your experience with it?
In functional components, as the appearance and product name suggest. Washer/Color. since it is only Power up!" Ya Better fuel economy! There is no effect of etc.
Since it is made of aluminum material, each piece is light in weight and can also serve as a washer, making it a very convenient product that can be used in a wide range of applications.
The BoltSingle Body can be used as a one-point accent when installing the License Plate, which is not so easy with the BoltSingle Body.
There is no effect of weight reduction, reinforcement, etc. (strictly speaking, there is a slight increase due to the color) and it costs a lot of money, but I like this kind of product and I am very grateful for it.
It looks like a one generation old FUJI TSUBO Type design, so some people may think it looks old-fashioned, but if you install it in a slightly older vehicle, you will be able to see the new design. "Oh, there were people wearing colors like this in this era..." I personally think it looks strangely like a good fit.
[Included Parts:were they on?
None
4Quantity:Considering that the price per set is 2,938 yen, the unit price per unit is 734 yen, and there are no color variations, I would like to see the product sold at a lower price, but since the product is out of season, it is probably a good thing that it is still on the market.
[Was there anything that disappointed you?
As mentioned above, there is only one color variation, Silver.
I have no problem with it, since I decided to just paint it whatever color I wanted after purchasing it, but to tell the truth, I would like to have at least Red, Blue, and Black options.
Other items that would be helpful
Point and hang of installation
As mentioned above, it is like a fashion color used in place of a bolt washer, so it is a simple job to use the Barnacle Collar when attaching a cap bolt of the appropriate length to the bolt stop on the attachable part.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
It is a very easy-to-understand product, so I don't think that incorrect usage is likely to happen.
[Notes]
None in particular. Please note that there are no colors other than Silver available when ordering.
[ITEMS TO BUY TOGETHER
Cap boltTypeExclusive Collar, so please prepare a cap bolt of each material & length you want to install.
[Opinions and requests to Manufacturer
I am grateful that they are selling them in this day and age, but I would like to see them sell cheaper equipment if possible.
View detail
Fits: KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI 750SS Mach IV (H2), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Is OEM cheaper?
Later OEMs bought them for a few hundred dollars.
Well, considering the hassle of buying KawasakiOEM Parts, it's okay.
View detail
This one's better.
I was surprised to see the Horn on the wall, so I immediately went for this product, but at first I put on Black, but I couldn't see the letters and the texture was too cheap, so I switched to Plating. View detail
Wow that's cool
After all, it looks different without it. View detail
I wish Logo had a choice.
It would have been better if the logo could have been chosen between ”Kawasaki” and ”KAWSAKI”.
The installation itself should not be difficult, but there are three recommendations for User's own installation.
1.Curing Fender with Toweletc.
2.Remove the cowling (see Photo 1 and Photo 2, actual working time is about 1 or 2 minutes)
3.The tip of the flat terminal of the Horn is sharper than expected, so protect the terminal when removing and installing the Horn.
The rest of the procedure is as described in the instruction manual.
Edge of Bracket is sharp. Chamfering is recommended for those who are concerned.
Since this is not a location that is normally easily touched, it was installed in its current state.
According to the instruction manual, the angle between the Horn and Horn Bracket is at about 14 o'clock, but we decided to set it at about 13 o'clock in consideration of the handling of the Wiring. Since there may be some individual differences, it is best to use the instruction manual as a basis and match it to the actual vehicle.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Refreshing around the Rear
Refreshing around the Rear
Many people are NORMAL oriented these days, but I personally like Fender Eliminator as well and recommend it!
View detail
Long tail wearers
Once the long tail is installed, the grab bar must be lowered so that it will not interfere with the grab bar installation. View detail
Compared with the original factory logo, the quality is indeed worse
The edges are not sharp enough, the paint finish on the surface is a little holey, and the quality is not as good as the original factory logo. In order to reflect "different", there is only this choice, but manufacturers should improve the quality, do not live up to made in japan ---------------------------- ------------------------------- The edge is not sharp enough, the surface of the lacquer surface is a bit hole, and the quality is not the original logo. In order to reflect ""unique"", only this choice, but manufacturers should improve quality, don't let go of Made in Japan View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z1000LTD/Z1Classic
MK2 exterior conversion kitBracket
I tried to install it, but it was a simple installation with double-sided tape from the back, and I managed to install the left one, but it didn't fit tightly at all on the DOREMIRight SideSide cover. View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 (air-cooled), KAWASAKI Z900 (KZ900), KAWASAKI Z750 (air-cooled), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
To KICKless.
The Rear Sets and Kick pedal interfere with each other, so I removed the Kick pedal and installed this Cap.
I like it because it matches the overall Image of the vehicle.
It may not be suitable for a NORMAL-looking car body.
View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
I can't help it, sir.
Bolt to hold the Chain Cover.
It has a special shape.
When I used All Screw's Bolt instead of this Bolt, the Chain Cover was Gapped.
It's a special Bolt, so it can't be helped, but the price is high.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX
Suitable for painting Base
There are not many used LTDOEMFender's available anymore.
I think it is good to use it as it is if you can bear the texture of the plating.
I couldn't stand it.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
To fill in the gaps in Lay-down
It was necessary to make the Screw hole a long hole. Well, it's Reproduct.
The gaps in the lay-down have been filled, and I plan to paint it black.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
To prevent loosening of Battery terminal
If you don't secure the battery with this band, the battery will shake while driving and eventually the battery terminal will come loose.
Make sure you secure it with a Band, it's still out at OEM Parts. You can buy it at about half price.
View detail
More stylish than NORMAL.
It is Z2Type, but I changed the seat of my GSX400 to this product while I was reupholstering the Tuck roll. So I had to widen the bolt hole a little bit, but I think it depends on the type of car. It's called "The Scroll. It is necessary to use some tools because it is necessary to drill holes and adjust the length. View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
That's normal.
It's different from the OEM Stanley, so it has just a little bit of rattling, but it's very effective as a dress-up because you can choose your color etc. View detail
Fits: KAWASAKI Z1000R, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1000J
I hope it comes with it.
It seems a bit unfriendly that when you buy a fuel cap, you have to buy it separately as well.
However, Packing is also a quantity:It's kind of nice that it's sold individually for those who don't need to replace the entire Fuel cap since it's a set, but it's more friendly for those who don't need to replace the entire Fuel cap.
I would like to see Cap's incorporated into the content of the inclusion from the beginning.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200 Daeg
Design is good, but the footing is poor
I replaced it from the OEMSeat with 3,500 miles on the odometer, but it's not legible
The lateral overhang seems to be Large
The gap between the Seats is Large as per the other people's imprints
Compared to the OEM SeatBracket, the position to lock the Seat is slightly different
Porting the OEMSeatBracket (10mmNutQuantity):2pc. (Set) and install it, it is not much different from OEMSeat
The Cushion feels hard, but there is no discomfort
I haven't ridden it long distances yet, but..
The tank side protrudes upwards by more than 25mm, not 15mm
When the Tank Pad is installed, it may interfere with your position
I re-pasted the Tank Pad
It takes a little bit of a hang to insert the front side when you install it
The price is low compared to other manufacturers, so compromises must be made..
View detail