Reviews
Fits: HONDA CT125 CT110 HUNTER CUB
Meter visor even cooler than expected??
I purchased the ENDURANCE Meter visorLong set + installation kit for CT125.
I was a little excited when I unpacked the package because I had been planning to install this product for a long time....... The installation was easy and took only about 30 minutes without any stress, and it did not interfere with any surrounding parts.
Visor, which looked so small at first sight, now its presence is upgrading HUNTER to Wilde and I am very satisfied with it. ?? I am sorry for doubting.
Tightening is still the way to go. [Color] Smoke.
Thank you for a really good product.
View detail
Bag and Quantity:Set and practicality at its best
The bracket on the underside could have been made a little more parenthesis. I attached the CenterCarrier bag for SUPER CUBCROSS CUB of the same manufacturer, and it went on without any problem. View detail
hmm
I'd bought the CB250R before because I'd heard it had a bad footprint.
I'm going to put it on.
Quality is good, almost OEM Product quality.
Almost indistinguishable from an OEM sheet.
The seat feels a little thinner, and the corners of the seat have been removed.
However, I don't think we should expect a Large width footprint improvement with this seat.
It's just a little bit. It's just a little bit. I feel like I have better footing.
View detail
Easy to install
Installation is really easy, taking less than 10 minutes. The texture is good, and the Pipe on the thick body is a nice parenthesis. If I have one complaint, it is that it is not designed to be installed with a helmet holder, even though it is an Endurance Carrier. Other than that, I am satisfied. View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-R125
I am satisfied with the quick delivery and excellent quality!!
I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. -------------------------------------------------- -------- I am satisfied with the quick delivery and excellent quality. After installing the product, it looks great. In the future, we will consider various things about what to load on the carrier. We ask that you continue to make good products. However, one thing I would like to ask is that the maximum allowable load is 8KG, so I would like to increase this a little more. If you attach a top box to the carrier, I think it may require more weight. Powered by Google Translator View detail
Gusseted and safe to use.
It has a GIVI Box weighing about 3 kg and is used to load shopping.
Gross weight of 8 kg giri (Sensation) There is no particular problem, although there are occasional instances where it becomes
The material is solid when pressed down, the material is reasonably thick, and the welds are beautifully well welded, so it is safe to use.
View detail
Fits: HONDA cross-cub 110, HONDA cross-cub 110, HONDA Super Cub 110, HONDA Super Cub 110
CenterCarrier for CROSS CUB
Various CenterCarriers for CROSS CUB are available, but I bought this one because I thought it was the most practical.
Mount bar is also available for mounting whatever you like.
Small objects such as rain jackets can be placed and secured with a small fixing net such as for MotorcycleNet.
Helmet holder can also be attached.
DAYTONA in the photo. [Helmet Holder Replacement Parts] Holder Body
Belt and other bags can also be attached.
The photo shows a magazine supplement.
View detail
![[Exclusive for Race]Under Cowl Set](https://img.webike-cdn.net/catalogue/images/88795/el64126pr1_01_TS.jpg)
ENDURANCE [Exclusive for Race]Under Cowl Set
Molding quality and texture is fairly good its to be expected from fiberglass resin made. I like the fact it comes with all the mounting hardware which makes installation easy. The blue markings i made on the product are areas i need to grind or cut off due to my exhaust set up which i am very aware of before purchasing it, i knew i would be modifying it to make it fit. Product was well packaged and protected. I would advice anyone who purchase this cowl to be aware of what type of exhaust set up you have and be prepared for minor modification but if your a Do It Yourself like myself, it shouldn't be difficult to work around modifying it. On a side note you will need to paint it with the color of your choice as well. View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB
I think it was a little small!
[How is it used?
Purchased with the expectation of wind protection for city driving and short distance touring.
Was the one you received as per Image?
It was exactly what I saw in the product listing, but I wish it were a little larger in size.
Was the installation difficult?
The installation was done by downloading the installation instructions on the Net.
But the installation itself was not like living in a house.
How was your experience with it?
As you said, the wind to the chest seems to have improved, but the wind seems to come to the upper side from the bud root
I wish it had a little more height, but I wonder if there is a special incense for front calipers... I don't know, I haven't actually put it on.
[Included Parts:were they on?
Included Parts:was attached.
However, since it was attached to the Seat, the adhesive glue stuck to the Bolt and Washer, so it took a little time to take the picture.
[Was there anything that disappointed you?
The Bolt and Washer included with the Seat are installed, so this is not RoseRose II, but the items included with the Bracket were packaged in one bag, so it is not RoseRose II.
I thought that if they could have done the same, they wouldn't have lost it.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
The Bracket is not that difficult to install, but the Bolt on the Headlight side must be held down when removing the Bracket and the Bracket must be attached to the Quantities.:I thought it would be better to Set
The left side of the body (brake lever side) has a meter in the hand, so there is a possibility that the washer may drop a little, so we need to be careful.
think
It is better to be careful and watch so that there is no gap when the washer is temporarily fixed in place.
View detail
Very sturdy piece of front rack.
It is mounted to the front fork and thanks to that it won't move a bit. You could even grab it a move your bike holding it. I would argue you could even sit on it :))) Very happy with this product. View detail
Perfect seat for my jc92
Seat looks good. Made with quality materials. No extra parts needed. Looks like it uses an oem base, so fitment is really good. Seat is very comfortable and im 5'8" View detail
It was easy!
It was super easy to install, which is good. It looks great and I'm looking forward to the future! View detail
Color installation is Large variety
As others have reviewed, it is difficult to install the four collars for attaching the Fender EliminatorBody to the body. I think it would be much easier to work with if the collars were at least flange-like.
The appearance is neat and satisfactory. The weight seems almost the same as OEM.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50
Satisfied
I am satisfied with the solid construction. It would be better if it were a little cheaper. View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Dedicated Bag is convenient
The bag is also Waterproof Specification and uses a watertight fastener, so you don't have to worry about sudden rain.
It is useful for holding simple tools, Touring net, and Cableetc. for recharging.
It does not lose its shape, but if you attach a bag normally, the length of the belt is quite excessive, so it may be a little troublesome for those who take or attach a bag depending on the situation.
I leave it on and I tuck the excess Belt so that it is not visible.
The installation of the Carrier itself is easy.
Since we will also use Crankcase Bolt for Engine, I would like to have at least Torque wrench.
However, the Multi Bar is difficult to see Navigation even if a Smartphone Holder is attached to it due to its position, so I could only think of attaching a Drink holderetc. etc. (I have not installed anything, though.)
Also, if you put too much stuff in the attached Bag when refueling, the open Seat will fall right out of the way.
Personally, I think it is a very good product.
View detail
Amazing
Another great product! Extremly happy with the 1100four badges and quick international freight, I'll be buying a few more great parts in the near future, Thank you kindly :) View detail
Fits: HONDA PCX, HONDA PCX, HONDA PCX160, HONDA PCX160
Fender Eliminator Kit installed
It is an impression of Refreshing with a small number of parts.
Installation Instruction Manual is not included.
I was in the previous MODEL!
View detail
Fits: HONDA CB250F, HONDA CBR125R, HONDA CBR250R (2011-), HONDA CBR250R (2011-)
cheap and reasonable
The Nut has a rubber-like thing to keep it from loosening. I still use a screw lock. I still use a screw lock.
The CarrierBody is made of steel, so the Drumstick is very heavy. But it has a magnet, so you can attach Emon's PurpleSaver for emergency use.
It is also waterproof to an unexpected degree. The inside of the bag doesn't get wet that much.
It looks tacky, but there is also a Pillion Bar, so it's a Recommendation!
View detail
High Screen
Installation was easy. I am very satisfied with the Large change by replacing the Screen. View detail
The color of the back of the Fender is one of a kind.
It is made to be firm or strong.
That would probably increase the weight, but ….
It is also a Grab Bar, so this sense of rigidity is reassuring.
However, when attaching the bracket to the back of the Fender, I had to put a collar between the bracket and the Fender. Well, it is not difficult to make a no-brown, but it requires a little ingenuity.
View detail