Reviews
Fits perfect with OEM lamp
I like shorter version of OEM rear lamp. I'm happy. If you live in europe you can use original licence plate holder. ,:))) View detail
A little bit to long
In my opinion a little bit too long to fit beautiful to stock exhaust, but maybe with akrapovic muffler will looks perfect I dunno. View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Wiring ingenuity required
The original wiring is surprisingly long and there is almost no space for it.
If possible, I would like to see ShortWiring or a storage boxetc. on the back of the number.
Also, it was difficult to understand where to use the original screws and the screws that came with the product.
It would be even better if the Number angle could be adjusted.
I dare to be harsh in anticipation of Moto Crazy's future.
View detail
You can also substitute OEMBracket.
The OEMBracket broke unintentionally and went into Reflector" Les" status.
Although it was difficult to obtain an OEMBracket, Moto Crazy's parts can be substituted for the OEM.
Thanks.
Installation can be done using the Rear Fender intermediate bolt.
The Reflector itself was prepared by OEM, but was repaired inexpensively.
I think it is because it is pointing downward rather than comfortably level, but that would be a judgment call for the inspector in charge.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Can Refreshing the Rear
[How is it used?
The state of the OEM was not to my liking,
I installed it immediately.
Was the one you received as per Image?
It was exactly what was listed.
Was the installation difficult?
Torx wrench is required to remove OEM Parts.
Also, since the application of Screw lock is described for tightening,
We prepared this one as well.
DUCATI's License Frame is handled by drilling some holes in the frame,
Double-sided tape fastening without screw tightening was fine.
How was your experience with it?
OEM condition is unknown, but Rear tire sprung Small stone, etc.
Protection film was applied to the Tail lamps.
In addition, the OEMReflector had a crack in the threaded part of the OEMReflector at that time,
Replaced by DAYTONA.
If the Tail cowl is to be removed, it will interfere with the Tail cowl,
The Fender Eliminator must be removed first.
[Included Parts:were they on?
It comes with a handling Instruction Manual and several screws.
[Was there anything that disappointed you?
Not particularly.
View detail
fenderless
[How is it used?
Was the one you received as per Image?
It was as expected.
How was your experience with it?
It has a much smarter look.
[Points to note]
If you don't slow down at large bumps, the Reflector may come in contact with the Tire and damage it.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
The Instruction Manual was easy to understand and easy to install.
It was easy to install and the finish was excellent.
It was a little tricky to adjust the angle, but I am satisfied.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
Cost-effective standard parts
Was the one you received as per Image?
The parts are carefully packaged with instructions and stickers×2.
Was the installation difficult?
If you follow the instruction manual, there is nothing difficult. However, when removing OEM parts, in addition to various hexagonal bar spanners and ordinary spanners, 2 sizes of Torque are required, which may be a little expensive if you need to purchase tools.
How was your experience with it?
The rigidity is solid, and the Blinker, which was PullPull all the way in OEMFender, feels fixed without shaking. (I think it is simply because the distance is shorter.)
I think it is good to be able to freely adjust the angle of the License Plate and the height of the mounting position. (I am a vulgar Stylele who fixes it in the shortest position.)
[Included Parts:were they on?
No Bolts were missing and there were no problems.
[Was there anything that disappointed you?
Nothing in particular, I have driven about 100km and there is no loosening of Bolt or Gap of Blinker or License Plate.
Point and hang of installation
When installing, it takes a bit of hang or large boldness to push the excess length of wiring into the tail cowl. There is a gap to push the wiring downward and upward, so it can be pushed into the cowl without breaking.
Availability and clarity of Instruction Manual
Naturally, the translation (please enter here, and there are several diagrams, so if you can read the assembly diagram of the Plastic model, you should be able to understand it without any problem.
Points to note
Since the OEM rubber bush is used in place of the OEM one, I thought that the rubber might crack during removal and installation if it has deteriorated over time. This is not a process that can be repeated too many times.
Opinions and requests to Manufacturer
Since the angle adjustment of the License Plate is stepless, I think it would be reassuring if they could tell us which angle would pass vehicle inspection if possible. (I guess if you are afraid of vehicle inspections, just go with the OEM)
View detail
Installation is Large
Was the installation difficult?
It is quite Large strange for one person to install.
The License Plate Light cannot be adjusted after installation.
How was your experience with it?
Wiring is almost invisible and looks nice and Refreshing.
View detail
just right (time, size, length, etc.)
[How is it used?
Was the one you received as per Image?
Compact over Image
Was the installation difficult?
Instructions are included, so anyone with tools can do it.
How was your experience with it?
This is my first Fender Eliminator Kit, so I don't know about others, but it's good!
[Included Parts:were they on?
[Was there anything that disappointed you?
None
View detail
If you are a Fender Eliminator who wants the direct-attachment feel of the License Plate, this is the one for you.
I was looking for a license plate to be attached directly to the body of the car as much as possible when converting to a Fender Eliminator, and I came across this product.
The easy-to-understand instruction manual for installation and handling is included, so DIY work could be carried out as if it were a plastic model.
It is recommended to use Screw lock agent to prevent loosening in various places, so it is advisable to prepare it in advance.
After the conversion, the Style is as good as the Image and the texture is satisfactory.
View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
The first Custom came from Fender Eliminator
It is inexpensive, and since the appearance is hidden by the Number, I don't worry too much about it. View detail
almost
S1000RR 12MODEL.
The Body is well made. If you are not dissatisfied with the shape, it is a good product. It attaches quickly.
The assembly is a bit annoying because of the large number of parts, but I chose it because it offers more flexibility in combination than the oddly integrated parts.
But personally, I find it a bit tacky.
Below is a list of areas that I thought were subtle. I did not feel that the quality of the product was not good enough, as it was all a matter of taste in design.
License Plate Light is very bland.
The design of the Fender Eliminator is a bit inward, but it looks as if the OEM's bloated License Plate Light has been transplanted. I couldn't put it on myself.
Reflector is on top.
→KitSingle Item:This is not so noticeable when viewed as a single item, but when attached to the car body, the reflector is on the top and the number is quite a bit lower, resulting in a blurry image. It's a good thing that the Fender Eliminator Kit is so good. 。 The number position does not change even if it is removed, and it was too much trouble to try to force the number up, so I gave up.
Blinker Bracket is very prominent.
I'm not sure if it's the Fender Eliminator or the Blinker Bracket, but it seems to me that the Blinker Bracket is very, very insistent. I decided not to use it.
These are the points that I personally thought "hmmm", but if you don't mind, I think the quality is good enough to buy it and put it on as it is. At least, I don't think it's a "HaGap". I think the quality is good enough for people who don't care about it to buy it and put it on as it is.
I hope this will be helpful.
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Homework 1
Somewhat fiddly!
However, it is highly complete.
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
It took a lot of work, but Parenthesis is great!
The M821 has a complete design including the Rear Fender, but I still want to make it a Fender Eliminator and have it Refreshing! I bought it because I thought it would be a good idea.
The installation itself was easy, but there were a few troublesome parts that took longer than expected.
I had a hard time 1. removing the pure normal thread screw in the bracket of the blinker and 2. screwing the body of the Fender Eliminator onto the body. I think we can proceed.
Also note that drilling is required when using OEM License Plate Bracket.
View detail
be stooped
The look is quite different compared to OEMFender. You will also feel a strong sense of satisfaction.
I think it is a good idea to check if the included ShortParts are sufficient for the job. I had to run to a hardware store because I was missing the nut that is used to hold the License Plate Bolt. The instruction manual says Original Nut" Original Washer It was stated.
The installation can be done according to the Instruction Manual without any difficulties. However, since the Instruction Manual does not mention how to remove the OEM parts, it is better to check the Service Manual. I was not sure and had to remove the Rivet in order to remove the OEM reflector, but in fact, I was able to crack the Fender without disassembling the Rivet. (Sweat)
The Locktite and Hex wrench were originally owned, and the Hex lobe wrench was bought for the need for T10 and T20.
View detail
![[Repair Parts] Triangle Mark Plate](https://img.webike-cdn.net/catalogue/images/27067/flu_s17_01_TS.jpg)
When you have bored up your moped 1 or for International Model moped 2.
The Australia Post Spec. CT110 HUNTER CUB does not have this mark, and I thought it would be better to have it. I bought it and installed it. It was easy to install and looks fine. I think the angle can be adjusted because it can be bent a little. View detail
Fits: DUCATI PANIGALE V2, DUCATI STREETFIGHTER V2, DUCATI STREETFIGHTER V4S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 Speciale, DUCATI PANIGALE V4S, DUCATI PANIGALE V4
A DUCATI classic
I chose this because it is a standard DUCATIFender Eliminator. I think that there is no problem including the angle etc. though there is a slight difference from other manufacturers. I had it installed at the time of delivery this time.
When you install it by yourself, it is not difficult work if you refer to the Net video etc.
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
DucatiSCRAMBLER
I use the OEM License Plate Light, but it is not Stylish. The mounting bracket is Quantity:Pair (for Left and Right) I'm not happy that they are separate and hard to match. View detail
DUKE390 Fender Eliminator
There are a lot of Fender Eliminator for DUKE390 current model, but I decided to use MotoCRAZY after a lot of consideration.
It is also the part that I liked very much because it feels like the most Number is directly attached, and I can choose two kinds of Number attachment angle in the law change from now on (Number fixed Frame is chosen either front or back).
View detail