Reviews
ease of use
Very easy to handle. View detail
Windproof effect + does not destroy Style + makes cleaning easier
I have an OEMHigh Windscreen, but when I replaced the Helmet, the Wind Cutting noise became worse.
The wind was now coming from the upper half of the helmet, but if the Adjuster is raised to the Largeest setting, the wind is no longer coming from the helmet at all.
It is easy to install, and if the adjuster is lowered, it hardly disturbs the style.
It was also good to have space between the Screen and Bracket, making it easier to clean.
The disadvantage is that it is not possible to put something like a Screen Mounting Bar Holder between the Screen and Bracket due to the installation, and the price...
View detail
It's fine without it, but it's not tight enough without it.
[How is it used?
Mounted on Archi's Seat
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult, but since the length is Limit, Bolt tightening while pulling a little.
How was your experience with it?
Without it, Seat's Balance looks bad.
[Included Parts:were they on?
Mounting Bolt only
[Was there anything that disappointed you?
Nothing in particular, but I wish it had been included instead of sold separately.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
It seems to be more durable than OEM.
It was firmer than OEM and seemed more durable.
Since these are completely self-satisfied Parts, there is little need to replace them unless the OEM Mud Guard runs out or something, but I replaced them out of self-satisfaction.
View detail
Meter visor installation
With the right tools, it was not too difficult to install. Maybe a larger size would be better for wind protection. View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250
Impression after 2 years of use
There are 5 different types of carriers for the Gixxer 150 that are always available, but others are too tough, too weak, too expensive, etc. This one is made of a sturdy material and is good for refilling. The others are too tough, too weak, too expensive, or too many other things, but this one is made sturdily and is good for refreshing.
The material is solid and does not shake even if a 40L~ear box is attached. I am generally satisfied with it.
But this is the point of … I dare to write!
Material is not very good, and even with the cover in place, the rain still soaks in and keeps it wet, so the rust is noticeable, especially in the cherubs that are written under the box. The rust is not noticeable if you don't look into the box because of the location.
The ? front side tip of the Cap is easy to remove. The front side was lost without my knowledge. The remaining Right Side can be easily pulled off by pulling with fingers. The Right Side is probably lost, but I think it got caught and fell off when I pulled it toward me to remove the Saddle Bag. One day, I found a black round disk on the Garage. I don't know. I found out when I was storing it. I pulled out the remaining parts on the Pipe with the broken lid and attached them with glue, but they seemed to come off again, so I used a chair cover instead.
?This is the best It's kinda…" I have a Spacer and a Carrier, but if left unattended in a downpour, water will definitely get inside. I think it is probably opening too much for the Saddlebag Support Plate that can be attached at the same time. I'd better think of a way to block it.
View detail
Stack Belt just in case
I have installed it on my KLX230R and do not want to be too much help, but I installed it just in case because the ease of pulling the motorcycle is completely different without the Stack Belt when I need help on forest roads or in difficult areas.
TrekField's Stack Belt does not require any particular Fender to be removed, so it can be easily attached.
I think it is more likely that it will not be used in most Cases, but in case of emergency, the Stack Belt would be a great way to respond to the kindness of your friends.
It is the Stack Belt of a Large person's taste.
View detail
Fits: HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB
Parenthesis OK
I think Parenthesis looks good. It is easy to install, too. The double-sided tape is visible from the outside, and it bothers me. I didn't notice it at first and ended up using a different double-sided tape to reattach it. Other than that, I have no complaints. View detail
The design and shape are good, but the gap for the tank pad is unavoidable.
The design and shape are good, but the gap for the tank pad is unavoidable. Although I purchased the product with an understanding of this gap, it bothers me a little. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI ZX-14R
Well-designed Rear suspension will be protected from dirt.
It seems to protect Rear suspension from dirt with good design.
Because of the tie band fixation, some adjustment may be possible when wearing.
View detail
![[K-CON Pro] License Plate Base](https://img.webike-cdn.net/catalogue/images/69385/0901-657-00050b0_TS.jpg)
License Plate Base
License Plate was installed to prevent bending and staining.
The size is exactly the same as the License Plate, so it fits nicely.
I would have liked it to be a little lighter in weight.
View detail
Sharp Reflector
The ReflectorSticker in the Included Parts:of the AELLAFender Eliminator Kit was not good, so I was looking up Reflector on the website and found this product.
I liked the casual design under the License Plate.
View detail
Pillion Bar installed (XJR400R.99)
There is some shaving of the OEMFrame, but it was not that difficult to do. The installation method was also easy to understand if you read the instruction manual that came with the product. It took about one hour because I was not familiar with the shaving process. View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI Ninja H2 SX SE
Speedra Carbon Tail Light Cover
The OEM ABSTail Lamp Cover is cheap, so we changed it to …Speedra's Carbon Tail Light Cover!
The texture will be much better.
View detail
![[NATIONAL CYCLE:National Cycle]Vstream Windshield](https://img.webike-cdn.net/catalogue/images/75533/16971_TS.jpg)
Fits: HONDA PCX150, HONDA PCX
Windproofing, though.
As far as I have been able to find out, I think this item is the LARGEST as a windshield. (At the time of purchase)
I think the windproof effect is solid in the Large size range.
However, in the summer, when parked in the sun, the light was concentrated on the Screen and the inside of the Screen melted.
It is possible to countermeasure this problem by placing Towel or other material between the two, but be careful, as the entire Towel may burn if it is not properly placed.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Tank Cover (GSX1300R HAYABUSAI type) Twill Weave Carbon
The product is aesthetically pleasing as a twill weave carbon and is well finished. The area of the cover is larger than that of a general stick-on cover, and the appearance of the custom parts is eye-catching, and the practicality of the cover is also reassuring, as it frees the user from the worry of damaging the tank with Belt Bracket etc. On the other hand
Urethane for surface protection [Color] The drawback is that Clear painting must be done by itself. A small amount of liquid Sauce still occurred.
View detail
Increased windshield effectiveness.
I purchased this product for the purpose of reducing wind effects when driving at high speeds.
OVER Separate Handlebars interfere with the Throttle Cable and the Tank of the Master Cylinder.
Handlebar is installed back to OEM (without Spacer).
Well nuts (C-440) are used to join the Base and Screen sections.
The experience of installation is that the posture is shallower than OEM, where the benefit of drag reduction is achieved.
The effect is not that noticeable in the normal posture, but the reduction was noticeable in the sticky prone position.
About the appearance (FRP Black, [Color] (Select Option in Clear)
The Luster feel is good, but as you can see from the light reflection in the Base area in the photo, the surface preparation is a bit lax.
if you are concerned about [Color] It is best to purchase without Clear and paint after priming.
The Screen section is not distorted in any strange way, and it is nice to know that this is also available as a Single Body.
It seems to be #Made-to-Order, so the delivery time may take a couple of months.
View detail
Moped Plate
It is easy to install.I just installed it,
How durable is the Sticker?
View detail
Satisfied with Simple Design
One month has passed since the product was installed, and the height is definitely 4 cm higher than that of the OEMScreen, and I am satisfied with the simple design that does not give the impression that it is just for show. However, the OEMScreen has a step between the cowl and the screen, so there is no difference between the screen and the cowl, but this product has no step between the cowl and the screen, so there is a difference between the cowl and the screen. In addition, the product has a quantity of Screen mounting screws.:Since it is not set, the Screen mounting Screw must be ported from OEMScreen or prepared separately. View detail