Reviews
Nice parts but
Beautiful piece from Over racing. Fits perfectly in place of the original cover. Gives a beautiful and slimming look. but unfortunately if you have a small saddle like me then there is a space between the cover and the frame. View detail
Accent
It looks different, but the work is a bit labor intensive.
It can be peeled off when you get tired of it, and it is a good price, although it needs to be degreased.
View detail
Used for Tank on Ninja1000sx
[How is it used?
The tank of the Ninja 1000sx is wide, so when touring long distances, the sitting position is inevitably shifted to the front. When I was riding Z650ABS, I used the same manufacturer's standard (black), but I was concerned about the floating of the glue, so I changed to SILICON this time.
Was the one you received as per Image?
Color is Color:It is so close to Gray that when attached to Black Painting, it looks like it is floating. It is not so bad once you get used to it, but I would have preferred a stronger black look.
How was your experience with it?
Functionality is fine. It has a firm knee grip.
[Points to note]
The location of the paste is unknown and must be confirmed on the ManufacturerHP.
How did it compare to other products?
I feel that the texture is not as good as the company's Standard, but it is supple and does not seem to peel easily.
Requests, etc. to Manufacturer
I noticed a lot of White paper dust on the product when I opened the product. Perhaps dust from clothes will also be a concern in the future.
View detail
Style is outstanding, but 、、、、
[How is it used?
The OEM Seat of Z900RS is famous for butt pain Seat, so we replaced it with DOREMI Seat once and the butt pain was solved, but it became a little high seat and the style was too bulky, so we replaced it with Archi Seat without bean paste and with Gel Seat.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The DOREMISeat had some rattling, but the Archi Seat was able to fit snugly.
How was your experience with it?
The texture of the outer skin is good, and the feeling of pressing with the fingers is also very sticky, so I used it with high expectations, but the footing was not improved much compared to OEMSeat, and the cushioning was not so good for the GelSeat included. I didn't get butt pain after about 2 hours test ride, but after a little longer ride, it might be painful. （I did not get butt pain after about 2 hours of test riding, but it would be painful after a longer ride (somewhat better than the OEMSeat).
[Included Parts:were they on?
Seat belt and tacks are optional parts.
I'd like to see it included as standard.
View detail
![Screen [CORSA]](https://img.webike-cdn.net/catalogue/images/52496/2428302_0001_TS.jpg)
The change in appearance is 80%.
NINJA400 (2023) I installed it in
OEM [Color] From Clear [Color] The Smoke gives a tighter appearance from the front.
The windproof effect on highways and windy days is I think I might have changed, if you ask me." It is a degree.
The texture is slightly cheesier than OEM as it is thinner.
In general, I think it's more than enough if you divide it into fashionable Items.
View detail
Fits: DUCATI 899Panigale, DUCATI MONSTER 1200S, DUCATI Multistrada 1200, DUCATI Multistrada 1260, DUCATI Panigale (except 959), DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
For ZX-14R 320Large diameter
If not Titanium, Stainless is sufficient, but it is not sold.
It would not be commercially viable to make the price low at Stainless.
View detail
Gorgeous.
I think it is the Large type among OEMOption and others.
Installation is easy, but there are some situations where it may get caught when getting in and out of the car because it is a large type.
Please consider those who have concerns about the high Seat height of the car.
View detail
Reticulated and luxurious
It functions well as a reflective tape.
It may be a little difficult to apply to curved surfaces.
View detail
It's a Universal Product, so there's no choice.
I would like to see a little more length, but the minimum area is covered, so that's good.
Even if applied properly, Air is hard to remain and has sufficient adhesive strength, but the color is not colorless, so Black may be less stressful.
View detail
Fits: TRIUMPH SPEED TRIPLE 1200 RR
Cheap ????.
The color may be translucent or Quantity:Pair (for Left and Right) The quality was disappointing for the difference in size and delivery time.
If you can afford it, buy it at a special price, it is a good one to prevent slipping.
View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
Price is Neck
Used to replace a sprocket on a first generation Ninja 250R.
Since we are replacing it with a beautiful black painted Sprocket
Lock nut also chose this product to provide a unified look.
It is hard to find a Nut that is Black in color and fits the diameter & Pitch.
I've checked Monotaro and other places, and they sell Black Nut, but the Pitch doesn't fit.
It can't be used because the diameter doesn't fit or something.
Therefore, we concluded that we can only use this product in effect, although it is a little expensive.
View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
scratch-resistant
It is purchased for use in fixing areas where you don't want to put scratches, vibration, and Cushioning fixation areas.
Reasonable price, Quantity:1 Set of 4pcs. so it is helpful for periodic replacement.
View detail
Fits: Others
The colors match...?
I thought it would fit the current Kawasaki green better than OEMSilver.
I thought it would fit though with the way the sun hits it.
It is more subtle than OEM.
View detail
About the Brake Reservoir Tank
The included Instruction Manual does not provide detailed instructions for replacing the bracket on the brake reservoir tank, so you will need to work with it in mind. The installation is not so easy as to fit easily and effectively, but the alignment of the screw holes with the body is not easy, and I feel that it is for those who are familiar with the work or those who have learned enough beforehand.
Even after the bracket replacement, the Cowl is still in a position where it seems to touch the Limit and I am not sure if this is correct.
The overall look and color is nice and comfortable at all.
View detail
For Automobile Inspection Case
I had to tuck it under the Seat because there was no place to store the vehicle inspection certificate.
However, the tag portion of the electronic vehicle verification had become folded in and was about to become unusable as it was, so I installed it as a countermeasure.
The size is a bit large for a car that is not an applicable model, but it is easy to install. However, the attached tape is weak, so be careful when removing it many times, as it may come off including the tape.
View detail
Looks good
I don't know if the installation is defective, but the right side is flush with the frame, but the left side is about 2mm above the frame. View detail
It was cheaper than OEM.
The exterior is covered in wounds and is starting to look shabby.
When I was wondering what to do with it, it was about 2/3 the price of the OEM Kit.
This one was sold at a great price, so I decided to buy a set of Quantity.:Refresh with Set.
The important thing is the installation, but the mounting holes are slightly out of alignment.
Some parts were not as readily available as OEMs.
Specifically, the Front Fender has two of the four holes slightly enlarged Large,
OthersShroud manages to stop at one place while pulling the others,
Fork Guard is the same way, with the same order of stops and other innovations.
We managed to attach it without any processing.
Shape is the same as OEM, but material is used for mounting.:Plastic colors are used, and they are not exactly the same.
It's not hard to modify the installation to some extent.
I thought it was for people who wanted to raise the price cheaply.
View detail
![Traction Pad Street Bike Kit [VOLCANO]](https://img.webike-cdn.net/catalogue/images/103505/55-10-0055C_TS.jpg)
Second purchase of this.
This is actually the second time I have purchased this.
The first one peeled off after about 3 years.
I wanted something else from Japan but couldn't find anything that fit my 2014 GSX1300R HAYABUSA, so I bought the same one.
No complaints other than adhesive life.
View detail