Reviews
One point
There are no special functions!
I think it's possible to have one point of coloring!
View detail
Fits: KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE, KAWASAKI NINJA H2SX, KAWASAKI NINJA H2SX SE
SPEEDRACarbon rear fender
I have installed the SPEEDRACarbon rear fender on my 25R and Z900RS and there was no distortion and the mounting holes did not have much gap, so I bought it for my H2SX. As for the installation, I had to install the OEM color in the upper mounting hole and fix it with the OEMBolt, but the hole was small and there was a gap from the center, so I had to use a semicircular bar to adjust the large hole position. But it was successfully installed. The other holes did not need to be enlarged and there was little distortion.:Pair (for Left and Right) The adjustment of the position of the material was done without any special attention.:Twill Weave Carbon glossy and cosmetic and looks better. The mud repellent effect may not be so promising…. View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Can be installed on the 2023 CB1300SF
The system is designed to attach all of the multiple carbon parts at once, and the peel-off paper (Transparent) The parts will stick to each other as soon as you peel off the "P". It is not recommended to work outdoors when the wind is blowing.
In the end, I gently peeled off each part and attached it while positioning it. The level of the sticking feeling is so-so.
View detail
It is a quality that makes it a Repeat!
The quality was identical to the product photo.
I bought a Manufacturer's first, but returned it because it fell a few steps short of the sample.
Comparing the two, Speedra would win except for its weight.
In terms of quality, it is close to HondaOEMOP's Dry carbon, and I guess the weight is the same etc.
It's more than twice the price, though, and since it's Matte, it's a plain girl.
After all, Material:Carbon Style beautiful here.
View detail
Fits: HONDA VFR800, HONDA Rebel 250, HONDA Rebel 500, HONDA CBR400R, HONDA CBR650F, HONDA CRF1000L Africa Twin, HONDA CRF250 RALLY, HONDA 400X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB650F, HONDA CBR1000RR, HONDA NM4, HONDA GROM, HONDA CBR500R, HONDA CB500X, HONDA VFR800XCROSSRUNNER 125, HONDA CBR1000RR, HONDA CBR250RR(2017-)
Carbon Wind
I am happy with the tightened look.
The work is also easy, just paste it on.
It would be better if it were cheaper.
View detail
Used for side cowl
Changed from Silver to Black, good because it is less noticeable! View detail
Simple and cosy.
It is a solid and cost-effective version of the existing Fender Eliminator.
However, Reflector must be purchased separately.
Material:I also have a Fender Eliminator in Aluminum, but it is a bit heavier.
Ah! The box is pretty cool lol.
View detail
Well, I guess I'm satisfied.
I think the accuracy is somewhat good, but the Edge is a little hard to hit.
There are some gaps.
View detail
Also comes with zx4r
The side reflector interferes with the blinker, as it did with the zx4r. If you are concerned about it, please cut the bracket of the side reflector. View detail
The quality is very good.
SPEEDRA:This is the first time I have purchased Carbon parts from Speedra.
I wasn't sure about the quality of the parts, but I wanted them as soon as possible, so I made the decision to purchase them in stock.
When we actually saw the product, we found it to be very solid Carbon and the Bolt position could be installed with almost no modification.
I purchased only the Top cover this time, but it would be better to purchase the Side cover as well to improve the balance of the appearance.
https://www.webike.net/sd/24196595/
View detail
very good
Very nice, but if the Gold net was Black, it would have been 5 Stars. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Twill weave glossy! Beautiful!
The product is so beautiful that it is too good to install as a Fender. (I would install it at all)
There was no shape error with the OEM Shape.
If I may say so, each Bolt hole may be slightly smaller than the other, so it is better to check before installation.
A word about the installation process.
GSXS1000 if you want to replace Front Fender, Rear inner fender and Chain Guard, 'Better to remove the Tire, or else.' 。
The Front Fender cannot be replaced unless it is removed securely.
Chain Guard is also impossible because there is a fixed Bolt around the back of the Rear Sprocket. I think so.
For the rear fender, there is one bolt near the side of the tire with a hexagonal wrench that cannot be inserted and turned with ordinary tools.
This time, I cut down the Hexagonal Wrench to the size that would fit in the gap and managed to turn and remove it.
I was able to do it without removing the rear tire, but it was strange with the Large tire. (Lol)
If I had a Kill that I could remove the Tire, it would be fine.
View detail
Screen bolt
Gold color stands out and looks cool!
ZrX1200 DAEG is the front side Quantity:The OEM is long for 2pc, but I was able to install this product without any problems!
View detail
There is a terrible noise around 45 km/h.
OEM Product has 3 Bolt and 1 Rivet. This product has only 3 bolt locations and the Rivet is not fixed.
The Chain side can be fixed firmly, but the other side is fixed with one bolt, which is insecure.
The sound begins to be heard after 30 km, becomes extremely loud at 45 km, and becomes small after 50 km.
resonance with something (Resonance?) Are you doing it?
Rear mud and rainwater splash will be reduced. (I haven't run Wet Rd. yet) 。
View detail
Easy installation in 10 minutes
The left side chain guard is fixed in two places and the right side is fixed in one place via a bracket to complete the installation. View detail
Seat Cowl connected and Refreshing.
The Seat Cowl is also made of the company's Carbon, which gives a sense of unity.
I was hesitant to buy it because the price was so high, but when I put it on, I was glad that I bought it.
The Rear area is now fully Carbon Spec.
View detail
Repurchased due to Spec. changes.
I used to have a Fender from this company, but I sold it once because I was bored with it, but a year and a half later I bought it again and looked at it again lol.
The installation is as easy as ever.
I wonder if we'll get an extended one too!
View detail
Dress-up
Screen replacement and at the same time
The price is a bit steep, but my custom desires were satisfied!
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Scratch prevention!
I put it on to prevent scratches!
Carbon is beautiful, and it looks perfect!
The fitting was good, but around summer some of the adhesion floated or popped in some areas.
No problem using it!
View detail
If only it were a little cheaper lol.
I was hesitant because of the high price, but when I installed it and looked at it, I am glad I purchased it. I had to adjust the screw position to see if it was an individual difference. View detail