Reviews
It is easy to install.
The Brake Side can be easily attached by hand, but I think it is easier to hang the fixture on the Hook if the Shift Side is hooked onto a Clip or something like a needle gold and pulled. View detail
Installed on New Model GSX1300R HAYABUSA
[How is it used?
Installed on a New Model GSX1300R HAYABUSA to enjoy the Winding.
Was the one you received as per Image?
The Twill Carbon weave is very beautiful.
Was the installation difficult?
It is very easy to stick with double-sided tape.
How was your experience with it?
Even just not touching the Frame directly was quite effective.
Cooling performance also seems to have improved, perhaps thanks to the product's unique Air Intake feature.
[Included Parts:were they on?
Included Parts:Not available.
[Was there anything that disappointed you?
None
View detail
Nice and easy installation
It's easy to install, looks great, works, and works! View detail
The design and functionality are perfect!
The paint on the frame around the ankle area was peeling off due to friction from the boots, so I put it back on and it not only improved the design but also the gripping feeling around the ankle. View detail
It was supposed to be scratch prevention...
I purchased this product to prevent scratches caused by off-road boots on my wr250rAluminum Frame.
I think this product will prevent scratches caused by Boots.
However, this product itself has no BALI, but the Edge is standing up, so if I installed it directly, the Frame would be scratched by this product. I hurriedly bought SpongeSeal at a nearby Home center and attached it to the back of the frame.
The thickness of the SpongeSeal used is 5mm, for reference.
Other than that, no complaints!
The Frame of R is Silver, so it is not noticeable, which is good.
I don't know if X is necessary since it is MOTARD to begin with, but I think it will stand out since it is FrameBlack. I think there are different tastes here.
View detail
If you look closely, you'll see a lot of Wound.
I purchased the glossy Carbon.
The shape was fine, but there were many disappointments such as WOUND on the surface, dirt and unevenness.
It is not noticeable, but it is still bothersome when viewed up close.
I don't think I will buy Carbon stuff from this Manufacturer next time.
I am not satisfied, but okay.
View detail
Fits: HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY S
ZETA Zita Frame guard
The car model Exclusive Design so it fits beautifully on the md47 Frame. The build and texture are both GOOD!
I wish there was a Black Spec. since it is only Silver.
View detail
Small processing is required for use with 22FX
This is for those who are hesitant to purchase the product because the conformity after 20 has not been disclosed.
19 for 250F can be installed.
Clutch cover and IgnitionCover can be used as is.
As for the frame cover, however, the clearance between the frame and STAND bracket is narrow, and I had to shave a little to get it to fit.
The Material itself is quite sticky, so it would be difficult to process with File. In this case, we processed it with Belt Thunder.
I hope that the lack of information on FX support after 20 will be remedied.
View detail
Installed on a Type 3 GSX1300R HAYABUSA to prevent inner thigh heat
Installed as a countermeasure against hot inner thighs coming in contact with the Frame when the foot is down while the vehicle is stopped.
Installation is easy with double-sided tape, but it is good with no signs of coming off.
I didn't want to put it on because I prefer the way it looks without it, but when I actually put it on, I found it was not as bad as I thought it would be.
The heat shielding effect has not yet been experienced, but is expected Large.
View detail
There is a dress-up effect.
I would have appreciated it if the OEMCarbon was described in the product description as it is a twill weave.
I think the product itself is good and the fitting is not that bad, although I guess it is plain weave because of its thinness and strength.
The BigFrame type requires removing the Hose, Canister, and other parts, so if you are looking for ease, the SSK type is easy. The lower part of the frame is hidden from view once the cowl is attached.
View detail
Good to use, necessary and sufficient
I installed it on my yz125x. I was hesitant to install ACERBIS because of its thickness and price.
This is a simple design, but I bought it because of the price and because it seems to be less affected by the thickness. I don't mind the shaving.
I think it's a good thing that I don't have it because I can work without removing the guard when I remove the seat frame for maintenance. I like it!
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
COSPA is good.
This Parts was always out of stock for a long time, but it was in stock, so I bought it.
The price is considerably lower than similar products, but there are no omissions such as the installation pins on the back side, which are common in cheaper products, and the reverse side is also in place.
As for the installation, the left side is left as it is, and the right side is replaced by lifting the front side of the fuel tank a little, but the position of the hole needs to be adjusted, so a drill or round bar file is necessary.
The only thing that bothered me was the weight. I also use Speedra's Rear Fender, which is also large and inexpensive, but thin and light, and I'm very satisfied with it. But the weight is heavier than normal, so it doesn't impress me when I hold it in my hand, regardless of its appearance.
Nevertheless, you can find other Brand's Material at the location.:When used in conjunction with Carbon products, the price is several tens of thousands of yen less than similar products from those brands, but the quality is almost the same, so I'm satisfied with the fact that I can increase the number of Carbon parts at a reasonable price if I combine them well.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
One point Fashion
I bought this because the paint on the Frame had faded on OffBoots.
It looks Up with a splash of color.
View detail
It fits perfectly and eases the heat.
I bought the GSX1300R HAYABUSA because even though it is now in its third generation, the GSX1300R HAYABUSA is so hot in the summer months that I almost burn myself with Frame heat.
It doesn't completely block the heat, but it's far better than nothing.
I chose this product because it is sure to fit, but I personally feel that it is a bit half-hearted because it does not completely hide the Frame. I think this is a matter of preference.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250M, HONDA CRF250L
I wanted to put it on md47, but it didn't work at all.
Sometimes you just can't help it, can you? View detail
While stocks last.
This is an Option product for the 2nd generation GSX1300R HAYABUSA, so it will be hard to get when the stock runs out.
As expected of an OEM product, it was also Exactly the same for the New Model GSX1300R HAYABUSA.
View detail
Real Carbon is good
I used to use SEA BASSOEM's Carbon Style on my 2GSX1300R Hayabusa, and the fitment was excellent, but I wanted to use real carbon, so I decided to use SPEEDRA this time. The dry carbon is great, but I had to heat up the edges with a dryer to get them to fit properly. It took some time to get the fit right, but that's the fun of DIY …. View detail
Satisfied with the look and feel of PetitCustom
[How is it used?
This is Carbon style, but I installed it for custom feeling.
Was the one you received as per Image?
If you look at it carefully, it's obvious that it's a fake Carbon, but at a glance, it's a good enough Parenthesis.
Was the installation difficult?
Just use double-sided tape and stick it on, so it's easy.
How was your experience with it?
Function? It's more of a look than a function, so I'm happy with that.
It's Carbon wind, so the price is Reasonable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
There is none
View detail
Exactly the same for the New Model GSX1300R HAYABUSA
I used to use it on my Model 2, but I bought it because the frame shape was very similar. When I ride on the street, my feet hit the frame and it is very hot without it, but thanks to this, it became comfortable. View detail
SEA BASSFrame cover
It is a Carbon Style Frame cover, but it is supposed to be excellent for heat exhaust etc. in the summer. View detail