Reviews
Installation could not be done
The FTR223 could not be installed because the fixing part of the Chain Cover was changed in the middle of the process, but it could not be helped because of my lack of confirmation. The quality of the product is good and I think it would have been a good product if it had been installed. View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Just a board.
A board that can move NORMAL Chain Guard.
It is not Chain Guard.
View detail
For the price
Flimsy for the price and concerned about durability
It's Matte compared to OEMs and the products
Balance of the overall appearance because of its linearity.
I think it's too obvious that it's going to fall apart, or that it's going to be too bad.
How does it fit if the rear suspension is changed?
I'm sure there are other options out there.
I think we should be very selective about the variety.
View detail
Processing assumptions?
The position of the screw holes did not match, which may have been an individual product difference, so I used Leutor to shave them down to match. View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S
It won't come on unless the Tire is removed.
I have not been able to put it on yet because I have to remove the Tire to put it on.
Texture is the best
View detail
good
Once purchased, you can rest assured that it will never break. View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
On the heels of Carbonization
The accuracy of Parts is not bad. However, BoltQuantity:Is it natural that it's just a 2pc part? I'm just satisfied with the appearance of this Part. View detail
It's a different model of car, but it's not impossible to use.
[How is it used?
I used it on my YZF-R25 that I use in Race because it is required to be installed in Race regulation.
Since the delivery date for the R25 was long, I chose this one that was in stock.
Was the one you received as per Image?
I'm very happy with it.
Was the installation difficult?
It is very easy to co-tighten with Bolt.
I could have co-tightened the Stand Hook Bolt, but it would have been too far back on the R25 to make sense.
As you can see in the picture, it's lame, but I used Universal Bracket to bring it to the front side.
How was your experience with it?
It does the bare minimum of what I need it to do. Unfortunately, I'll be going to Spare when I receive one for my R25.
The upper side should be secured with Swing Arm and Double-sided Tape.
[Included Parts:were they on?
Comes with a 6Bolt
[Was there anything that disappointed you?
Not particularly
I don't really recommend it, because it's not a Manufacturer-inspired installation.
I think it can be used for any kind of car depending on your ingenuity.
The accuracy of the product was not bad. It was thick enough and chunky enough.
You can use it with confidence in terms of strength, and Bolt can be tightened firmly.
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA WR 450F
I'm not sure it's functional.
Protection is no problem. 。 It's a two-piece structure, and I like it because it's simpler than other manufacturers' products.
There is no damage that becomes impossible to run even if it hits, and I think that it is difficult to give stress to the attachment part of the Swing Arm.
However, the decrease is early! I think that it is too early even if Repair Parts comes out however.
It is a pity that it seems to take longer than expected when it is also out of stock.
View detail
Chain Guard
Parenthesis I hope you are feeling better 。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。 View detail
For Regulation.
It is installed for race regulation.
There are various types of Chain Guard, but the only type of Machine I have is the one that is co-tightened to the Rear Stand Receptacle, or the one that mounts to the Swing Arm by drilling a hole.
To be honest, I don't feel comfortable with the Swing Arm type that makes a hole in the Swing Arm, so I bought this one. To be honest, I don't feel comfortable with the Swing Arm type, so I bought this one.
By co-tightening, the position of the STAND receiver can be changed to QUANTITY:Pair (for Left and Right) You can use a spacer, such as Washer, for the other one. Balance is better.
View detail
Because of race regulation
I bought these because race regulations require the Sprocket guard to be installed.:Choose FRP with Black Gel.
This is a type that co-tightens with the Bolt on the STAND receptor, so it's quite easy to use.
Some sprocket guards have a hole in the swing arm. Personally, I think the latter type is more sturdy than the former, but I don't feel comfortable with this type.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
good good
It's very good. The price is very good. I'll use it often. And also recommended I'll do it. Please take care of me. It was a pleasant shopping trip. ^^ View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Simple
It is a simple Guard that only prevents entanglement. If you remove the OEM, only the installation part will remain, so I will use it temporarily. Impression of appearance changed a little by pasting Carbon style Cutting sheet. View detail
The Stand plate is not in the right position, and it takes more time to adjust it
This product was originally released with an L2-L6 fit and I was inquiring about an L7 fit
I purchased this product when I received a message that they had made a minor change to support L7
But then..
When I looked at the product I received, it was a little different than the product pictures for L2-L6
The Chain AdjusterStopperBolt・Nut of STD is used to fix the Front It had been changed to use
When I inquired, the Adjuster part of the Rear may be damaged in the original Spec I've been told that there are
It was a spec. change not because it was for L7
To be honest, this adds more work to the chain adjustment
In addition, the position of the stand plate is inward and the chain adjuster From the shape
J-TRIP Endurance VPlate Receptacle cannot be used as it is
I have a DURACON Plate to win So I shaved the plate
To be honest, it didn't go as expected in many ways It's a shame..
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
subtle - - -
As shown in the picture of webick's Page, attaching it to the inner side of the installation bracket of Swingarm, the Chain guard will slip out and it will only be attached to the outside. Or would you cut and install Chain guard?
First of all, Material : Since it is attached to the outside of Plastic's Chain guard, will it be easier to ease the shock from the side. The rest is visible. I think that the price is slightly expensive. Recommendations are subtle ...
View detail
For Circuitization
Installation of Chain guard is mandatory in Circuit.
I was looking for something of reasonable price and I reached this product.
I am relieved because I took it without problems.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I am wearing it once. - - -.
I am wearing it once, but it is almost inconspicuous Parts.
It is a place I can not see, but it was good if the shape was a bit more Slim.
Parts that I do not want to take care of.
View detail
Fits: YAMAHA XT250X, YAMAHA XG250 TRICKER, YAMAHA SEROW250
Chain guard Breath?
Generally, if you consider using OFF
A shape that surrounds Chain is desirable
But, at the SEROWOEM, only the exterior Pla Parts
It is a shape not attached.
So, full-fledged Spec. Not, but Gold exterior
It is on as if it is visible "Enjoy fashionable" like
I think it's Parts.
Installation also, ScrewQuantity : 2 pc was exchanged and the same place
Just add the Gold genus Plate and close it.
Because it is solid with Bolt on parts
Did you say that it was the biggest point?
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
Thing is fairly large. Regrettable [ it is slightly uncool that one screw hole remains, and / if the screw thread is turned off, it can insert in also with a makeup Screw by bandage but ] in CRF250L, since it is not the peculiar part but a combined u
Thing is fairly large.
Regrettable [ it is slightly uncool that one screw hole remains, and / if the screw thread is turned off, it can insert in also with a makeup Screw by bandage but ] in CRF250L, since it is not the
peculiar part but a combined use Parts with a number vehicle type.
It was the highest when there were a Color alumite and a Hairline, although it was satisfactory in general.
Anxious, if it interferes with a little shock, since the but existing Guide in which
attachment is very easy is just before a Chain.
View detail