Reviews
K&T Heel guard
About quality and texture Very good quality anodize is a deep blue one that hasn't faded much for in dietect sunlight most of the time About the feeling of use it is a very discreet heel guard compared to some others barely noticeable About Design Thin ,minimalist of a heel guard does make you wonder how much it woukd stop the chain from impacting one's leg heel foot ? Haven't had to as my chain has not broken since putting it on About Size Chart n/a Cost performance and comparison with other products In my opinion a good price for the products quality About shipping and packaging I had no issues Any concerns, cautions, or advice when purchasing none I'd recommend it ! View detail
For dress-up purposes
I have RFender in Carbon, so I bought this to tighten up the Rear area.
I heard that many people were having trouble installing the swing arms, but I was able to easily install them by temporarily attaching them to the front of the swing arm and then shifting them to the rear.
I'm not going to Circuit, so it's a complete dress-up. (Lol) 。
But it was hard to wait six months………
View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
SP Mukawa Aluminum chain guard
I think the price is a little high, but it's massive, and I love it!
The atmosphere changes just by changing from resin parts to aluminum parts.
View detail
Wide range of diversion
I bought the Chain Guard because it is mandatory to wear it when participating in races.
This is for the JC61 Grom, but I think it is structurally compatible with the Square Swingarm. If you have a narrower Swing Arm, you can use it by simply changing the bolt to a longer one.
I could have cut and pasted the steel plate, etc., but the dedicated product was still more convenient to use.
The Swing Arm of the Mini bikeClass is usually used to STAND-UP the rear, not the V-receiver, but the L-receiver.
This product has a missed shape so that the Chain Guard and Rear Maintenance Stand can STAND-UP without interfering with each other.
They also do not come into contact with the road surface and do not wear out when falling.
The texture is very good, but I think it's a little expensive, so it would have been better if it was a little cheaper.
View detail
Used with J-TRIPStand Hook
The size of the bolt is Exactly M8x50 P1.25, which is included with the J-TRIPStand Hook. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125ThailandMODEL, HONDA MONKEY125
It looks good.
Good quality. It can be installed easily. About a minute? I think it's a good dress-up item. And I think it's a reasonable price. View detail
Fits: MV AGUSTA F4 1000S, MV AGUSTA F4-750, MV AGUSTA F4-BRUTALE, MV AGUSTA F4 1000AGO, MV AGUSTA F4 TAMBURINI , MV AGUSTA F4 BRUTALE910S , MV AGUSTA F4 BRUTALE 910R , MV AGUSTA F4 1000R, MV AGUSTA F4 1000S SPR, MV AGUSTA F4 SerieORO , MV AGUSTA F4 RR1078, MV AGUSTA F4 1000R312, MV AGUSTA F4S, MV AGUSTA F4SPR, MV AGUSTA F4R, MV AGUSTA F4 SENNA
1078
It was just like the image. I am satisfied with it. View detail
no problem
Bolt On is a must have for circuit driving. View detail
Installed for regulation support
It's one of the few tzmAftermarket parts. I was able to install it securely without any sticking. View detail
I knew you'd want a dedicated one!
[How is it used?
It is used for YZF-R25 that has been converted to Racer.
Stand Hook to be tightened together is MORIWAKIEngineerRing's Stand hook roller.
Part Number:05210-10350-00
Was the one you received as per Image?
It was just like the image!
Was the installation difficult?
Nothing too difficult, just take the Bolt off and put it on!
How was your experience with it?
It's good to have a dedicated product. I used to use the one of A-TECH (This was also a dedicated product...) I was using the one of
At the time of the race car inspection, the person who inspected the car told me that this (A-TECH) was too far back and it was useless. So I bought this product to replace it.
This product is firmly offset to the front side, and it plays a role as a chain guard firmly.
The guard part is also solidly built, and the material is thick plastic, so I don't think it will be damaged or broken.
[Included Parts:were they on?
There was not. It is the content of the photograph of the product Page.
[Was there anything that disappointed you?
Not really!
View detail
Fits: YAMAHA YZ 450F, YAMAHA YZ 250F, YAMAHA WR 450F
Repair Parts is also available.
The structure is simple, and I think there is no large difference in function and life compared with the thing of ZETA. (ZETA products are also being used in other cars)
The WearPad's arrival was erratic, and the ZETA was no different.
It is good if you check it frequently, but it takes time to procure in Troubleetc. (More than a few weeks) In some cases, it is recommended to purchase Repair Parts as well.
WearPad is a common part for other models, so I think it can be used for other models.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
It's a small part, but it stands out!
I have an Inner fender made by Speedra, and I bought their Drive chain guide.
Spec. is the same as Fender, twill weave with gloss. The look is definitely better than OEM plastic parts.
In my case, I was able to replace it with Bolt On without having to modify the hole processing at all. However, the quantity:2pc. If you have a HexaWrench for Ratchet, it is easy.
It is a small part, but it is unexpectedly conspicuous, and I think that it is a reasonable price if it is thought that it is made of Dry carbon.
View detail
Carbonization with TSR products for peace of mind
If you're promoting carbonization, this one's for you!
It's an inconspicuous place, but it's highly self-satisfying.
I compared it with OEM Product, but I chose this one for its design and material.
(OEM is better in cost and firmness.)
I'm sure there are actual safety considerations, but I have no way of experiencing (or wanting to) that effect, so I don't know.
but I trust the product because it is produced by TSR.
In the introduction Page of the product, it is fastened with the screw of the attachment, but I use it with Stand Hook.
I didn't have any problems with tightness.
The delivery time was 2 months, so I waited patiently, but in my case, it took less than a month.
View detail
Fits: KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2, KAWASAKI NINJA H2R, KAWASAKI Ninja H2 SX SE, KAWASAKI NINJA H2 SX, KAWASAKI NINJA H2
The product is as expected and satisfactory.
Shop was happy to get it sent to me earlier than the deadline! 。 For more information about the product, see Material:Because it is a carbon product, there is a sense of luxury and I am satisfied with Large.
If possible, it would have been better if a protective film had been put on the product, as I have to be careful not to get Wound on it when I install it.
View detail
It's a gem!
I bought it for the parts I needed to do the race
KevlarCarbon is selected for support
It's easy and cool because all you have to do is bolt it on
It's not too expensive, so it's a good dress-up
View detail
A-TECH Chain Guard
Excellent quality with no flaws as expected, tidy's up the rear section by replacing the oem plastic guard that fades over time. Definitely worth the value. View detail
For the price, it's good
With Cut-Out and board Gold, this price would be hard to beat
Not for Dress-up, but for Safety and Rule
That's enough
My one complaint is that the thickness of the Nut
Can no longer insert the anti-looseness split pin
It's just that
View detail
It looks nice.
I was at a loss as to whether to wear the w800, but Inaduma who is not opening the hole is still cool
Plating is beautiful, you can see the hair root of your face, the movement of the pupil is also visible
Since Screw comes with it, I do not need trouble
It is about 2000 yen higher than OEM
View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
It also looks different.
As we changed the number of Rear sprocket, we purchased it as necessary.
OEM Parts Number I think that appearance may also change with the shape covering the whole.
Current situation Rear sprocket uses 44 Ding.
View detail
Fits: YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer
A gem that clears all the goodness of appearance, robustness, goodness of maintenance
Because the OEM resin Chain guard got dressed worriedly, I found this product when I was looking for a good-looking item made of Gold genus.
【What made you decide the purchase?】
I studied about the following regarding Chain guard purchase.
- Robustness of the product itself
- Looks good
- Good maintainability
- Cheap
While checking the look of goodness, I also examined the robustness of the product itself and its goodness of serviceability.
And it was cheaper to compare with Carbon's ones in terms of price, so I bought it for purchase.
【How was it actually used?】
OEM of Material : If it compares with Chain guard of Plastic it will be heavy so vibration etc etc. I was also afraid of the risk of dropping out at the time, but although I have run 3,000 kilometers so far, I can use it without Trouble so far.
However, there is a time when using the STAND and placing the car body strongly with Gun while using it sounds like resonating. OEM's Chain guard is fixed in 4 places, whereas this Chain guard only fixes in 2 places, so I think that it is better to regularly fix the fixed Bolt tightening.
【Mounting was difficult?】
Chain guard installation itself is not difficult.
Rather it may take a bit of time to remove OEM's Chain guard. For OEM Product, BoltQuantity : There are 4 places in 2 places and 2 detachable Rivets in total.
I think that Bolt understands as soon as you see it, but in the case of a running car, Rivet may be assimilating with the dirt on the car body, so it may be a pain to look for a fixed place.
【Please tell me the installation point and hang】
In my case, I fixed it using medium strength Screw lock to fix Aluminum's Bracket and Chain guard on Front side.
Just in case to make sure it is a place that is subject to vibration and something.
Because it is heavier than OEM Product, let's fix it securely.
[Is there anything I was disappointed about?]
It is exactly like making quality like healthy and healthy Large, but unlike the photo on the sales page I have been Shiningly more than I thought and it felt funny.
I think that there is no problem if it is a car model that plants are heavily used, but MT - 09 is finished in a Matte atmosphere comparatively, so I think that it was better if you let me finish calmer a bit more.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Besides wasteful Shiningly finish of finishing, making it robust and inexpensive is not particularly dissatisfied.
I think that it would have been better if possible to have things of Black color.
【Have you compared items?】
- BARRACUDA Chain guard
It was the first candidate because the shape is cool and the color is also calm Black..
But when I looked it up, I decided to fix it only with Bolt 1 pc on the Rear side, so I removed it from the candidates.
[Others]
I could not stand the shining which I eventually did as Shiningly, I gave it to the painter to Powder coat and applied it to the matte Black.
When MT-09 and Stainless Steel burned out colors of this bare color match, only Silver can be thought of.
I think that it is a more selling product if it is two types of Lineup, Silver and Black.
It's not so bad, but it's a product I want to repeat again if it breaks down with some Trouble.
View detail