Reviews
Wow that's cool
It was bigger than I expected.
It's best not to fall over, but, well, Large seems sturdy.
To install, simply insert it into the hole and tighten with an 8mm Hexagonal Wrench.
It said to tighten at 40N, but there was only Torque wrench up to 25N, so I may have to check for looseness or something every now and then.
View detail
Spartan increase/increase!
[How is it used?
Appearance change and Damage reduction.
Was the one you received as per Image?
more than expected
Was the installation difficult?
It is easy if you have the right tools in place to do the work.
How was your experience with it?
Satisfactory and good
[Included Parts:were they on?
no problem
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great
I am glad I put it on! I feel safe. View detail
Can be installed on MT-10 2022MODEL
It is not in the fit, but I bought it because the Frame, etc. should be the same.
Left SideBolt in NORMAL : M12x40 P1.25 Flange cap bolt, installed without collar.
NORMAL Right SideBolt : M12x42 P1.25 Put three color points on it and get it out. 15.
Balter's attached Left SideBolt : M12x100 Protector, collar on and out. 40
Balter's attached Right SideBolt:M12x80 as well. 20
Therefore, the effective length of Bolt is 5mm longer than Baltar's, and since it does not butt up against it, there is no problem, so we installed it.
Installation is by tightening Torque 70 Nm. It is recommended to use a torque wrench since it is an important part.
Also, the NORMAL bolt is quite hard to remove, so it is better to prepare a long Spinner Handlebar or the like.
View detail
be well-matched
I purchased this product when I took delivery of my gsx-s1000gt. The installation was done by the dealer, so I don't know how difficult it was, but I felt that I could probably do it by myself without any difficulty. However, the manager of the store said that there are many people who make mistakes in screw tightening, so please leave it to us.
The installation of this product is, in a word, a good fit for this motorcycle. It seems to protect the cowling from standing chipping. However, I would like to ride it carefully so as not to drown standing up.
The angle may be a little bad, but here is a photo of the installed condition.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
Overlaying sliders are the best
I bought it at a good price during the overlaying sale period.
Since the subframe was installed first, there is no major problem with installation.
Remove the existing spacer and install the slider and enclosed spacer in its place. Since the frame and sliders vary depending on the model year, check the model year before purchasing.
The beautiful color of silver and the sturdy structure and details are also overlaying. -------------------------------------------------- -------- I bought it at a good price for the overlacing sale period. Since the subframe was installed first, there is no problem with the installation. You can remove the spacer and install the spacer with a slider on the spot. The frame and slider vary depending on the year, so check the year when you buy and buy. The beautiful color of silver and the strong structure and details are also over-racing. Powered by Google Translator
View detail
If the price is low enough
It looks really cool. I hope more Reasonable products from other brands will be released in the future, like the Type 2 GSX1300R HAYABUSA. View detail
Speedra Frame Slider
It is easy to install., I think it will be useful not only in Circuit but in all situations as an insurance policy in case of a fall. View detail
Highly rigid
The mount is solid and the slider is big enough to prevent tipping over. View detail
insurance against fire from standing fire
Bracket is Material:It is made of aluminum and is lightweight. The bolt on the engine hanger is difficult to remove, but once removed, it is easy. 22mm Spanner and a MONKEY Wrench are required. View detail
Slider
The Engine could be installed as is without lowering.
Torque management is a safe bet.
Slider. slipped and missed Damage….
I hope it will not be useful!
View detail
Even an amateur could install it easily.
[How is it used?
To prevent damage to Cowl in the event of a fall?
Was the one you received as per Image?
Mount section was solid.
Was the installation difficult?
The product installation itself is easy, with the only difficulty being the removal and installation of the Cowl.
How was your experience with it?
It's for just in case, so it's not active yet.
[Included Parts:were they on?
It was all there, and Sticker was included.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
It was a Large-size tool that Hexagon did not have in its arsenal.
The Instruction Manual only showed pictures of the assembly of the Parts, so I referred to the installation position by looking at the pictures of the installation examples on the Home page.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS Cafe, KAWASAKI Z900RS Cafe
a very good-looking item
First of all, it's a very good product. It's lighter and stronger than I thought. If the bike falls, I think I can protect it well. It makes the bike look even better on the outside. I highly recommend it. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS
Installed on Z900RS
I bought it because it looked cool as a Slider. I am satisfied with it, especially the volume on the Left Side of the Engine, which improves the Parenthesis.
Plate was painted Gold from Red.
View detail
having an effect
The GuardBody had been scraped to about half its thickness on the lower part, but there was no damage to the EngineBody thanks to the Guard being installed. View detail
good!
It was easy to install. View detail
It helped me right away.
The GSXR1000R 2022 was installed at the time of purchase of a new car, and the unfamiliar handling of the Separate handle caused it to fall over immediately upon delivery.
When back, STAND was caught by the foot and ba tan on the other side.
The Exhaust System and footpeg were scratched but Cowl, Mirror, Handlebar, etc. were intact.
I would give it 5 stars because it was suddenly useful (laughs).
Repair Parts is another good thing about this product.
View detail
I like it in Fashion
The engine slider with DownForce is a good idea, and there are two different designs. It is true that the stability seems to have increased. However, the Quantity:Pair (for Left and Right) I would like to see it sold as Repair in Single Body, and if Right is damaged, Quantity again.:Neck is the one I have to buy in Set. It's a good product, please. View detail
MORIWAKIEngineerRing is the quintessential MORIWAKIEngineerRing.
The quality was satisfactory at a slightly lower price than OEMAccessories.
We have not tried to determine the effectiveness of the system, as we will not know until we fall over.
View detail
Installed on Circuit Running
I installed it on a 2011 CBR1000RR.
We wanted to install the minimum amount of sliders necessary for circuit driving, so we installed these. The installation is done by tightening the bolt to the engine hanger bolt on both sides. When installing the slider, it is necessary to drill a hole with a hole saw or similar tool for the OEMSide cowl. The hole position was drilled according to the positioning paper included in the package, and then the hole was drilled by matching it with the actual bolt. Since I have not yet crashed, I do not know how well it will perform, but I think it will be very effective for slip downs and the like. On the other hand, I would not use it on public roads because the Damage may go to the Frame side if the Slider gets caught on a curb or something when it falls over. It takes a bit of time and effort to install, so if you are not confident about it, you should ask a motorcycle shop to do it for you.
View detail