Reviews
Texture is not good for the price.
I bought this product because it is a pooch, but the ATEC
We were out of stock and had no choice but to go with this product.
The installation is Exclusive Design but it does not look good.
View detail
I'm disappointed.
It was Pooch's Brand, and ATEC was sold out.
I had no choice but to choose Puch. The product was crappy for the price.
I am sorry to hear that.
View detail
2016MODEL also ….
It is a 2016 MODEL and has the exact same problem as diceK's 2018MODELImpression.
The Left SideParts cannot be bolted on and require POM-C machining, so it is not recommended to purchase unless you can do it yourself.
View detail
It was not long enough and could not be installed.
Installation is easy and anyone should be able to install it easily.
The one I purchased this time could not be installed due to insufficient length.
View detail
Fits: BMW R nine T, BMW F800ST (STRADA), BMW R1200S, BMW F800S, BMW F800R
555B030 is not compatible with 23’RnineT
The thing is good, but unfortunately the conformity information was wrong.
I cried myself to sleep when I realized that the return and exchange deadline had passed.
By the way, the picture is also different; it is not the Type that is Axle ShaftPenetrating, but the Quantity.:Pair (for Left and Right) The independent one came, but so did the Manual with the model number, so perhaps the photo is different.
View detail
Rear Axle SliderShaft is too short to install.
You should not buy it. It will be a waste of Gold. View detail
Cannot be installed = in some situations
The first thing that is not allowed to be installed is the vehicle body with the ReDeer Stand Hook (installed under the suspension) and the OVER Swing Arm.
The length of KITACO's Axle Shaft was sufficient. However, when I tried to remove the rear stand of DAYTONA, it interfered. I tried everything for a while, but This is not working." I came to the conclusion that it was a good idea.
There is a way to use this product as a stand hook, but it would be a bad idea to STAND on an Axle, and the surface finish and material of this product would be scratched in an instant. I would not use this product.
View detail
The dimensions don't match at all.
I bought this for the rear, but the shaft is not long enough to fit the guard. I'm not sure. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
impossible to install
I waited for the delivery date and was disappointed with the product Rear and Quantity:It was a set purchase, but the front as well as the rear are non-conforming.
I also checked the fit, but Shaft is too short to reach.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
impossible to install
I waited for the delivery date and was disappointed with the product I also checked the fit but shaft is too short to reach View detail
Fits: YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA TMAX530, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500, YAMAHA TMAX500
This is the worst Site.
I ordered Parts, returned it because it was missing a part, or asked for the missing part to be resent, but I haven't heard from them in a week. This is the worst scam site ever.
Please be careful, everyone.
I will never buy from this place again.
I checked the office and called, but no one answered.
Do I have to cry myself to sleep?
I'm so mad.
View detail
Cannot be pontooned.
It is said that it is compatible with h2sx, but the Pin is included for the cantilever, and the Tire is removed and installed, but there is a possibility that the Tire will come off because the Pin is removed when running frequently in the Circuit etc., and the person who had it installed at the dealer actually said that the Tire almost came off and removed it. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
Does not fit.
The boss diameter and Shaft length were totally different. It is an expensive study. It is useless. View detail
Fit?
I was going to install it on a 2005 CBR1000RR SC57, but
Shaft length is too short to fit.
The Screw mountain of Shaft must be applied to Tap.
I bought it because I like the design and I will find a shaft at home center that fits the length and install it.
View detail
Current MT09 cannot be mounted on the short bracket
The current MT09 has a short bracket and cannot be installed. I think it is defective It's a shame, because it's only about a year old, so I guess I'll just have to give it up View detail
![Rear Shaft Protectors 【Rear Axis Protectors]](https://img.webike-cdn.net/catalogue/images/41365/Y41PK2_pict_1471432853554445_web_TS.jpg)
The axis size is not fit for rear wheel
I ordered the protectors for rear wheel, when i want to install, i found that the rear wheel protectors axis is not fit for rear wheel (MT-10), the axis is only fit for front wheel. View detail
It's called a warranty of conformity …
I can't physically attach the Right Side Slider
I contacted the Manufacturer and they said they will put it on as is
The bolts that are attached are only included on the Left Side, and they are also spec
View detail
Fits: MOTO MORINI Granpasso 1200, MOTO MORINI Corsaro 1200
I returned it.
Because it was far too far from the product image
I returned it.
Among Net products, it is said that there are things that are not the same thing as images because they are using images
This was a thing that I could return, but when I can not do it
Since it is described in the product page the reasoning is so self-responsible
View detail
Can not be installed at all - - - -
Perhaps a completely separate model was sent - - - Front was patchy, but here Bolt's Length is too long and Slider Body both do not match the shape of AxleBolt at all. In the first place, only Package has a Vinyl bag, and ProductNo is not mentioned, otherwise for Front has no manual entry. Since the Front could be installed without difficulty, I tried to open it and try to install it, but it was useless. Since I opened it all out, it will be impossible for me to return it, I will fall asleep. From next time I would like to have product management solid. The image was for Front and Garbage that could be attached for Rear w View detail
I'm sorry.
I searched and purchased with ZX - 10R 2016, but as for the thing that was sent
There is description as 04 ~ 05 and it does not conform at all.
Also in the description of item, there is no description of conformity year and it seems that it is somewhat unkind as Net mail order.
It can not be helped because it is a product that can not be canceled, but I will be going to the Garbage box.
Those who purchase the same product in the future, I think that it is better to take confirmation of conformity first.
View detail