Reviews
Simple is good.
I used to use Axle Cup, but I decided to use Slider because it is a "Chain". It is smaller than I expected, but it looks OEM.
I think it is also the strongest in terms of cosmetics.
View detail
antlion antlion Rear slider
antlion antlion Rear slider
Items that should be purchased for Motorcycle protection.
View detail
antlion antlion Front slider
The least expensive product in Slider
Custom parts are gradually being discontinued.
I should probably buy it to protect Motorcycle.
View detail
Emphasis on decoration
It was the first product that came out, so I installed it, but it is a little expensive. I was glad that there were no decorative elements in this part, such as the decorative plate on the base or the aluminum collar, which is not visible after installation.
Quantity:Pair (for Left and Right) Note that two sockets of the same size are required because they will be supplied if they are not held from the
I don't know how effective it is because I haven't tipped it over. (I feel that if the bottom case is tipped over in such a way that it is damaged, it would not be enough to protect Axle.)
I think it would be easier to attach and detach if one side is fixed, but I don't know why.:Pair (for Left and Right) It is a hassle because you have to hold it down from the
View detail
Exactly and Fit
Exactly and Fit. It looks Good.
Installation is easy and takes only 5 minutes.
My concerns are that the fixing rod that goes through the shaft is cheap and seems to rust over time, and that it can only be fixed with a weak torque.
Screw lock is a must.
View detail
Quick change style
I chose it because it looked cool, like the Slider cone on Racer's Quick change.
It was replaced with an external Axle, so it was lubricated and adjusted by wrapping a Rubber plate around it.
The texture was not good for the price.
View detail
BABYFACE Babyface Rear Axle Protector
The contents are basically the same as for FrontAxle Protector.
[How is it used?
City Riding, Touring Main
Circuit not running
Was the one you received as per Image?
No different than the Image in the photo.
Simple, but easily recognizable as a Babyface product, so I like it.
Was the installation difficult?
The installation itself is easy.
However, as per Instruction ManualQuantity:Pair (for Left and Right) Which to plug in from, and also the Quantity:Pair (for Left and Right) Because the shape is different in the Protector of
Be careful not to make a mistake.
If you make a mistake, you will know because it is obviously uncomfortable.
Quantity:Pair (for Left and Right) The Bolt passes through the Axle Shaft, which is connected to the Protector of the
Imagine the condition when installing the product, and install it while considering the amount of protrusion.
If you put it too close to the One Side, the screws will not protrude enough when you install the lid side (opposite side).
Nut may be reduced.
The torque of the nut is 5N/m, which is extremely loose.
If it is tightened too much, the Protector and Screw on the side to be used as a lid may merge and come out when it is next removed.
There is a groove carved on the outer circumference of the Protector, but the groove is not chamfered in that area.
Cutting hands. Either chamfer or don't touch with bare hands.
How was your experience with it?
It looks good and is available as custom parts.
Drive safely so that this will not come in handy.
Since the amount of protrusion is reasonable, there is a feeling that it will be protected.
There is no sense of hindrance by objects when pushing Motorcycle by hand.
There is no obstacle at all when using the Motorcycle stand.
[Included Parts:were they on?
It consists of several Parts.
But it is known, so there is no need to be troubled.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
BABYFACE Babyface Front axle protector
[How is it used?
City Riding, Touring Main
Circuit not running
Was the one you received as per Image?
No different than the Image in the photo.
Simple, but easily recognizable as a Babyface product, so I like it.
Was the installation difficult?
The installation itself is easy.
However, as per Instruction ManualQuantity:Pair (for Left and Right) Which to plug in from, and also the Quantity:Pair (for Left and Right) Because the shape is different in the Protector of
Be careful not to make a mistake.
If you make a mistake, you will know because it is obviously uncomfortable.
Quantity:Pair (for Left and Right) The Bolt passes through the Axle Shaft, which is connected to the Protector of the
Imagine the condition when installing the product, and install it while considering the amount of protrusion.
If you put it too close to the One Side, the screws will not protrude enough when you install the lid side (opposite side).
Nut may be reduced.
The torque of the nut is 5N/m, which is extremely loose.
If it is tightened too much, the Protector and Screw on the side to be used as a lid may merge and come out when it is next removed.
There is a groove carved on the outer circumference of the Protector, but the groove is not chamfered in that area.
Cutting hands. Either chamfer or don't touch with bare hands.
How was your experience with it?
It looks good and is available as custom parts.
Drive safely so that this will not come in handy.
Since the amount of protrusion is reasonable, there is a feeling that it will be protected.
[Included Parts:were they on?
It consists of several Parts.
But it is known, so there is no need to be troubled.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: DUCATI SUPER BIKE 1299 S-L, DUCATI SUPER BIKE 1199S-L, DUCATI XDiavel, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PanigaleV2, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI Multistrada 1200S Pikes Peak, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200S, DUCATI Multistrada 1200 Pikes Peak, DUCATI Multistrada 1200 Enduro, DUCATI Multistrada 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200S, DUCATI MONSTER 1200R, DUCATI MONSTER 1200, DUCATI DIAVEL
Not sure if Slider can do what it is supposed to do.
[How is it used?
Town ride
Was the one you received as per Image?
Street Image
Was the installation difficult?
It is simple, but requires two pairs of hexagonal bar Spanners.
How was your experience with it?
I don't know because I haven't tipped over, but as far as the Right Side is concerned, the Slider does not seem to contact the ground.
[Was there anything that disappointed you?
No. I feel that it would be good to have a sense of unity with Front Axle Slider.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Funnel Type and looks good!
I had a different Manufacturer, but I decided to go with AGRAS this time.
Funnel Type is my personal favorite!
I didn't find a color I liked, so I'll have to paint it, but it's aluminum and has a nice texture! Looks good!
View detail
just to be sure
Engine protector and Quantity when purchasing a new car:The installation itself is easy, as all you have to do is thread it through the Axle Shaft and tighten it. The installation itself is easy, since all you have to do is thread the Axle Shaft and tighten it, but there is a Torque specification, and since it is a delicate Torque of 4Nm~5Nm (depending on the length of the bolt, either one will tighten it), the Torque wrench I have at home could not handle it. I had no choice but to convince myself that I might use it in the future, so I purchased a Torque wrench that could handle it. I was able to handle it with the one I had at home, but I could not use it with the Quantity:Pair (for Left and Right) Socket wrench is required for Both Sides and may require a separate deep socket.
The effect is unknown because it has not fallen over.
View detail
Absolute peace of mind
The Dress-up is inexpensive and can be easily installed with a simple snap-on installation. Together with MADMAX Aluminum Bar End Caps, the front area is fully protected. View detail
Smaller Accent
The small accents and gold on the feet are very effective. I hope this Parts will never be active …. View detail
Fits: SUZUKI GSX-R 1300 Hayabusa
RearShaft protector
I installed it in case of an accident. I don't know how effective it is yet, but I think it is good for drive shaft protection. I think you can enjoy customizing it to match your motorcycle. View detail
For One point around the Front
There are not many custom parts around Front.
It is one of the few self-satisfied Parts. I just hope it won't fall over and I'll be glad I put it on.
The quality and ease of installation are unquestionable.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Just in case.
It was installed to prevent damage to Axle Nut and other parts in the event of a fall.
I hope it is not too small, but just the right size to be effective.
I bought White, but the Chain oil splashed on it and it was noticeably stained in Black, so I thought I should have chosen Black.
View detail
External Axle not available
Purchased because the shape was similar to WSBK.
The weight was approximately 150 g.
Type through the axis is Quantity:Pair (for Left and Right) It is difficult to remove it from the "QUANTITY".:Pair (for Left and Right) Easy to work with because it is independent.
I had changed the Axle to 0 pointsShaft, so it was too slippery to install as it was.
I dealt with it by wrapping a roll of self-adhesive Tape, but it stuck when I removed it and looked Large strange.
View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI GS1200SS
If you think it looks good, buy it.
Are you glad you put it on when you have an accident?
I hope this doesn't prove to be useful.
View detail
Is it a feel-good product?
It is easy to install, but is it just a slider? It is very short and small. It seems to be not so effective when it tumbles down. It is not very noticeable, so it looks good. View detail
Simple is good.
I installed it on a 2019. simple and nice. I hope it will keep the bad guys away (lol).
The effect is not yet known, but depending on the situation, there may be other areas that will be protected by hitting this area first.
(I'll try to avoid having that effect if I can.)
View detail