Reviews
Risk Reduction
[How is it used?
In case of emergency.
Was the installation difficult?
Remove the NORMAL AxleBolt→attach the included AxleBolt (with a hole for the shaft)→Slideretc. and attach the rest of the parts. If you have a Glasses Wrench and a Hexagonal Wrench, all you need to do is to follow the instruction manual. It took me about 10 minutes to do it.
How was your experience with it?
If you look closely, there is a small gap between the brake side bolt and the gold base plate, which is not a good parenthesis.
But overall, I am satisfied with the Dress-up and everything else.
I'm glad I put it on." I hope that the day will never come when we will be able to do so.
View detail
No worries in case you fall down!
[How is it used?
I purchased this car so that I can drive it safely even if I fall down when I go on a long trip, such as touring destinations.
Was the one you received as per Image?
Quality is as good as the Image.
The precision of the screws and pipe lengths, etc., were fine.
Was the installation difficult?
It was a complete Bolt On.
I was concerned about the durability of the Axle ShaftBolt since it is a hole type, but when I saw the product, I was reassured that it was well made.
How was your experience with it?
I have not fallen down yet, but it also has a dress-up effect.
[Included Parts:were they on?
Instruction Manual, Bolt, Shaftetc.
[Was there anything that disappointed you?
I am concerned about the durability as it is anodized and may fade in the future due to sunburn, etc.
For Honda models other than CB1100, CB400SF, CB1300, etc.Fork pitch is the same type and can be used with Hollow Axle Shaft by Bolt On. In my case, I use it with 0 pointsShaft and it works fine.
View detail
Focus on appearance
I almost never scrape here when I fall (experienced,, sweat),
Well, I introduced it because I thought it was important to look good.
One point of Gold is nice.
It is also well made.
It comes with a detailed instruction manual and is very easy to install.
View detail
Emphasis on decoration
It was the first product that came out, so I installed it, but it is a little expensive. I was glad that there were no decorative elements in this part, such as the decorative plate on the base or the aluminum collar, which is not visible after installation.
Quantity:Pair (for Left and Right) Note that two sockets of the same size are required because they will be supplied if they are not held from the
I don't know how effective it is because I haven't tipped it over. (I feel that if the bottom case is tipped over in such a way that it is damaged, it would not be enough to protect Axle.)
I think it would be easier to attach and detach if one side is fixed, but I don't know why.:Pair (for Left and Right) It is a hassle because you have to hold it down from the
View detail
Smaller Accent
The small accents and gold on the feet are very effective. I hope this Parts will never be active …. View detail
Fits: SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI GS1200SS
If you think it looks good, buy it.
Are you glad you put it on when you have an accident?
I hope this doesn't prove to be useful.
View detail
Is it a feel-good product?
It is easy to install, but is it just a slider? It is very short and small. It seems to be not so effective when it tumbles down. It is not very noticeable, so it looks good. View detail
Safety and aesthetics
I was able to install it successfully using the KITACO front axle shaft.
I feel like I'm on the edge with the KITACO Nut. I think I'll replace it with the supplied Nut.
It will definitely protect the car body, and it will also hide the Axle Nut and other parts, which may improve the aesthetics a bit.
I haven't tumbled over it, so I haven't been able to check its protective performance. The product is within my expectations.
View detail
Just the right size feeling
I was looking for a small size one for Z900RS, and I bought it because it was just right size. The quality of the product is very good and I am satisfied with it. However, the color of Gold is not Quantity.:Pair (for Left and Right) One star MinusPoint that was subtly different. View detail
talisman
Very easy to install.
Tools used MONKEY Wrench1pc. 2 sets of Hexagonal Wrench
Replace the existing AxleBolt with the supplied AxleBolt and tighten. Assemble the AxleBolt as shown in the drawing and tighten it with Hexagonal Wrench.
Hexagonal Wrench is 5mm.
He said to check the AxleBolt tightening Torque.
6N-m for the Slider (Recommendation) It seems to be
If you're like me and haven't used a Torque wrench yet, do so at your own risk.
View detail
talisman
Installation can be done in about 10 minutes by anyone with the right tools.
Just remove the AxleBolt and then assemble according to the drawing.
The Hexagonal Wrench is 5mm, but if you only have 1 pc, it will not turn together and cannot be retightened.
The mounting effect is unknown because it cannot be proven without falling, but I thought it would be better than wearing a talisman.
Tools used MONKEY Wrench, Hexagonal WrenchQuantity:2pc
Torque is specified, so it is best if you have a torque wrench.
View detail
Before you fall down.
I installed it to prevent damage to the front fork by falling down. I haven't tested it, but I am sure it will protect me. The parts are very well made and could be installed with confidence. View detail
Engine slider and Quantity:Set
Purchased at the same time as the Engine slider from the same KFACTORY
As a precautionary measure of insurance, the Engine slider and Quantity:I installed it in the set, so it looks better and I like the appearance of Parenthesis
View detail
Fits: HONDA CB400SF Revo, HONDA CB400Super BOLDOR Revo, HONDA CB400SF VTEC
It bothers me
2014, 400 BOLDOR (NC42) It is
If you have a 24mm Wrench prepared in advance, it can be installed in no time
I decided that the gold insert color would go with the disc Well … it's fine, but I guess I want to yabby! (Lol)
I guess you can think of it as insurance
View detail
Fits: YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA XSR900
sounding good
I installed it for the Circuit run I installed it on my TRACER 900GT with no problem It's not as per the Instruction Manual, but the installation has no rattling and is secure We could have installed it View detail
Fits: KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI NINJA1000
It looks nice
There are various Manufacturers but I adopted it with price and appearance. Although I do not know the performance unless I do it in practice, I do not want to take care of this Slider. View detail
With erect Fork...
OHLINS Rewinded to erect, standing upside down history is Zero but installed as insurance.
I am satisfied with the product, but as long as it is erect Fork 【Idyllic】 I feel it..
The Gold color Fork itself is tough, but the one attached to the Inverted Front Fork fits neatly.
View detail
Just for sure
From this part where I've scooped up by honest Touring or commuting
Lever Bar End Mirror Cowl will be in touch
However, if you accidentally damage Front fork,
I am satisfied well with the appearance I attached
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Because it does not match the body image - - -
There was a sense of quality, I was attracted by the feeling of Race ish, but it was purchased and installed, but because it did not match the body image, I returned it to the original Funnel type Slider. View detail
Fits: KAWASAKI KSR110, KAWASAKI D-TRACKER125, KAWASAKI Z250SL, HONDA APE50, HONDA XR50, HONDA XR100, HONDA APE100
Very good product But the sale of the website Should tell Stock. It is convenient to shop. Check stock before the announcement. need to request a refund.
Very good product But the sale of the website Should tell Stock. It is convenient to shop. Check stock before the announcement. need to request a refund. View detail