Reviews
GB Engine Guard
[How is it used?
24-hour (e.g. observation, operation (of a machine), care (of patient))
Was the one you received as per Image?
high
Was the installation difficult?
Easy
How was your experience with it?
No problem
[Included Parts:were they on?
OK
[Was there anything that disappointed you?
Oil replacement has become a bit more difficult.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Great rigidity.
The pipe is thicker and has more fixed bolts than the OEM, so it is very rigid.:It comes with a Plastic Slider, so it will be cheaper in case of moss.
However, installation was a challenge. Since it is slightly gapped, I managed to install it by fine-tuning while loosening and temporarily fastening.
I thought it would take an hour to finish and started working on it at 15:00 and finished at 19:00. I think it was an individual difference.
The product is good and I am satisfied with the Large change.
View detail
OK for minor falls
Large sturdy to the extent that it is knocked down when standing or parking.
RearBrake pedalBrake lever and clutch lever will bend if it is knocked over even with this attached.
It does not seem to be able to withstand a fall while driving.
View detail
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Engine Guard installed
Installation should not be a problem if you have some knowledge of maintenance.
An Engine Guard was added to protect the engine in the event of a runaway and to mount the Fog Lamp.
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Casually Guard
I didn't want to have a LargeGuard, so I purchased this product. View detail
Engine guard for z650rs from Daytona
The engine guard from Daytona looks good on the motorcycle as you can see in the picture and fits the frame. The screw included in the item is a bit short but it is something you can buy on your local hardware so not really a big problem. The welds can be better also given the price of this item. Overall, its an OK product. View detail
Expensive but satisfactory
Installation is easy, and the sense of security is totally different without it.
I am glad I bought it, even though it was expensive, because I never know when I might have to stand up and get hurt.
Drink holders are also attached to it.
View detail
GB350S Engine Guard installation
There is no clearance between the Torque wrench and the Pipe when installing the Bolt, so it is difficult to do. It is recommended that two people work together. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
I don't want to be a burden to you, but I'm not sure I'd want to be a burden to you, either.
[How is it used?
Touring is the main application.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Installation was easy.
How was your experience with it?
The effect is unknown because it has not yet been tipped over.
[Included Parts:were they on?
It was all there
[Was there anything that disappointed you?
There was not.
It was fitted as an insurance policy.
It is elaborately finished as an industrial product.
It is no wonder it is more expensive than other companies.
I am not a *YOSHIMURA believer.
View detail
It takes quite a bit of time and effort to install.
[How is it used?
I don't intend to ??I thought it would be cooler if it was attached, so I installed it although Motorcycle is used.
Was the one you received as per Image?
I was going to buy it on ?Webike, but I found a new one for a little less on Yahoo Auctions, so I bought it there.
?It seems quite sturdy.
?Image was different after the last completion.
Was the installation difficult?
?Engine hanger bolt is to be removed, "Put a Jack under the Engine…" I was worried about that because it was written in the form of a "I'm sorry, I'm sorry. What if the DAYTONA bolt doesn't fit as soon as I remove the bolt from each One Side? I was worried because I am an amateur. (I supported the engine from below with a Jack, but it was hard to do because of the …Exhaust System).
?It may seem like nothing once you get used to it, but it's the first and last time in your life, and you are nervous about this and that.
?I also wasn't sure what Bolt's Torque adjustment was like.
How was your experience with it?
?It looks good when the installation is finished.
? Just think of it as normal. "Daytona" There are plastic parts that give the impression of Quantity:Pair (for Left and Right) I was surprised that I couldn't put them on the same place with both of them. Most of the product photos only show the Right Side of the Motorcycle, but the Left Side has a different Plastic location. If I had known that, I would have bought a cheaper OEM.
[Included Parts:were they on?
? Of course, if you buy it new, it comes with everything.
[Was there anything that disappointed you?
? "Daytona" The position of the plastic parts in the Quantity:Pair (for Left and Right) To be different in the
?KIJIMA and OEM are much cheaper, so from a cosmetic point of view, they may be better.
(DAYTONA is the most Quantity in the form of Guard.:Pair (for Left and Right) I read in word of mouth that they are close to symmetrical … or something like that, so I chose Daytona even though they are more expensive. I feel like I put too much of a good thing on it, even though you're installing it on a used car.)
■Points of installation and hang
?Bolt removal is quite hard, so be careful not to lick the bolt screws.
Availability and clarity of Instruction Manual
?That part is fairly straightforward.
Notes
Since there is no ?20-40 Torque wrench, it is difficult to determine how much to tighten.
Items to buy together
?It is difficult to install without a solid tool.
Opinions and requests to ■Manufacturer
?Quantity:Pair (for Left and Right) Same location "Daytona" The design should be such that the plastic parts of the
? Something is wrong.
?Included Parts:It's great to be able to buy only ?Included Parts:.
?Bolt and Nut should be Black like OEM.
? KIJIMA, I think the price is too high compared to HondaOEM.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
Looks good!
First, it looks better.
It is not as assertive as Frame Slider, but that is good.
Replacement is easy; simply remove the existing Screw and replace it.
Some Packing also needs to be replaced, but it was too much trouble so we reused it.
So far there have been no leaks.
View detail
Appearance of Yalu
I don't know about the performance thing because I haven't mocked it up yet….
As for the installation, I think it is one of the easiest ones, although it is with HORNET250….
If you are somewhat familiar with Motorcycle maintenance, you will probably be surprised to find that the work is completed with aplomb if you work with a lot of enthusiasm.
The holes were perfectly aligned, so there was no need to do any large-width processing, as is the case with overseas products.
I was surprised that the instruction manual was quite simple and handwritten, but I think anyone can understand the installation method if they study it before installation.
The gap between the right side and the bottom of the side plate is too narrow to fit in a normal installation, but if you simply loosen the nut that holds the side plate in place, the gap will widen and you can install the side plate without difficulty.
However, it is tightened with a considerable Torque and may be difficult to loosen without an Impact wrenchetc.
I recommend it because it looks pretty much like a yalu spec. but …… hmmm… it's not cheap….
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R 40th, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Good product but in Circuit….
I have had it on my 2016 ZX-6R since I bought it new.
I crashed in the first hair of Suzuka TWINCircuit, but thanks to this, there was no Damage to Engine or Cowletc.
However, as the skill increases and the bank deepens, it will hit the ground.
In this case, the risk of falling down increases, so people who are somewhat familiar with Circuit should not use it.
View detail
To protect the Engine in the event of a fall
I put a yz125 engine on my TDR80. I bought this to protect the engine in case of a fall because I might run on the circuit occasionally.
In particular, the Clutch Housing Cover on the EngineRight Side is a must-have product because of its thin, lightweight magnesium cover and water pump.
View detail
Add photo
After installation, I haven't mossed it yet, so the protective properties are fumi-rice. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
Outstanding sense of security
I ordered it and received it immediately.
I was worried about the installation, but it was easier than I expected. I thought it would be better if the replacement Volvo was painted.
It's expensive, but I like the Large size.
View detail
I was able to install it without any modification.
By adjusting the mounting, I was able to install it neatly and without any modification at all. I think the cost performance is high. View detail
Fits: KAWASAKI ZX6-R, KAWASAKI ZX10-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R
It's a perfect MATCH.
It is easy to install without interfering with decals and pads. I will not know the effect until the time comes, but I am satisfied with the appearance of the product. View detail
The strength seems to be sufficient.
Tanks and Engines do not seem to be damaged when they are knocked down.
Just Quantity:Pair (for Left and Right) The output of the Quantity:Pair (for Left and Right) I was slightly concerned that it was not symmetrical.
View detail
I like the vertical line.
The engine and vertical line of GB350 are integrated and fit together beautifully. I was worried about the plate part due to its structure, but the actual product is thicker and that solved the problem. View detail