Reviews
Fits: KAWASAKI W650, KAWASAKI W800, KAWASAKI W800, KAWASAKI W800 CAFE, KAWASAKI W800 STREET
Design Excellence
I installed it on my w800/2016. I don't know how functional it is until it falls over, but the design is great. I am glad I chose DAYTONA Pipe Engine Guard. View detail
The description is attached and attachment was able to be attached very easily. Thank you. However, the goods price had become 799 yen part price reduction on the purchased next day, and it was the feeling which lost for a while. It was though
The description is attached and attachment was able to be attached very easily.
Thank you.
However, the goods price had become 799 yen part price reduction on the purchased next day, and it was the feeling which lost for a while.
It was thought that a few wanted consideration.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07, YAMAHA MT-07
DAYTONAEngine Guard
I had it installed when I took delivery of the car, so I don't have a review of the installation process, but it should probably go on easily.
I put it on thinking it was just until I got used to the vehicle, as recommended by Motorcycle Shop, but I hardly feel any discomfort. (Personally.) The "I" is attached as it is because it is a "I".
After all, it took me a few months to get used to the vehicle, and a few times with the typical Pattern of standing staggering, but the effect is quite high.
The similar handling of the vehicle's Frame and the color Black seem to contribute to its inconspicuousness.
Also, there are plastic parts at the contact points in the event of a fall, which can be replaced in the event of severe damage.
In the event of an actual fall, the Handlebar tip and the Exhaust Coveretc. will make contact and cause some scratches, but there will be no Damage to the Parts themselves. It is not as protective as the Bumper on a learner's car, but it is not as noticeable, so it is recommended at least for this vehicle.
View detail
CBX1000 engine guard
The engine guard arrived in good condition at the time I was told (had to wait for manufacture). Shape and fit is good, welds are nice, chrome is very good. Only negative, is 2 bolts were too short, and missing 2 nuts, so no 5 stars. Shape is not quite the same as original Honda part, it curves out wider at the bottom then tapers in to the top. Should be good for protection, and can not notice when riding the bike, but looks a bit wide from the front. View detail
Looks Good Easy Upgrade.
These were easy to install and look great on the bike. They should help protect the bike during falls or tip over however I haven't the chance to test this out. View detail
Select Black
Black was selected for the color to match the body.
It is lightweight and durable.
It looks good on the body and does not look out of place.
View detail
KIJIMA Crash Bar For Yamaha Bolt R-Spec
About quality and texture - Quality is good. Heavy steel. Nice paint, glossy black. Parts line up pefectly for installation. About the feeling of use - Instills confidence in case the bike is dropped. Products to buy together - No other parts needed. Difficulty of installation - Istallation was easy, bolt holes lined up perfect. I did cut some rubber inertube as a cusion for the parts that clamp to the frame down tubes so that the Bolt's frame would not get marred. Cost performance and comparison with other products Equal - Price is reasonable. About shipping and packaging - Excellent. Any concerns, cautions, or advice when purchasing - None. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Sufficient protection.
The car was immediately damaged by a standing fire (Right Side) 3 days after delivery, but other than the Engine Guard, the damage was limited to the lower end of the Exhaust System Heat Guard, the Bar End, and the tip of the Mirror being slightly scraped off. The painted surfaces are just scratches that are not noticeable with a touch pan.
I'd like to avoid moss as much as possible in the future, but it's a good thing to know where I'm going before I fall.
View detail
Fits: HONDA Rebel250, HONDA Rebel300, HONDA Rebel250 S Edition
Large, looming and perfect for preventing standing up
We heard that the general Engine Guard gets in the way when Gear changing, etc., and were looking for something that would be sufficient as a standing guard but would not get in the way of foot operations.
The Engine Bar Crash Guard not only protects the machine with a large protector, but also has enough height from the toe to avoid interfering with operation.
It also provides a pleasant degree of vibration control to join the Engine section to the Frame.
Although it is not an anti-vibration measure on highways, etc., it also seems to have increased rigidity.
Installation is easy, but the box of SP Tadao is Limit with another type of Exhaust pipe.
Although the installation manual indicates to assemble from the Left Frame, be careful not to assemble from the Right Frame, otherwise you will not have enough space when tightening the bolt at the joint.
I did not fall, but I tried tilting it in case I lost balance and could no longer support it, and it supported me well and was easy to pull up.
View detail
Hmm
Scheduled to arrive in May, but arrived in March ahead of schedule.
When it came time to start the GW installation.
Some Screw sizes are slightly too Large.
The Female Screw on the Engine side has been shaved and started.
Abandoned installation in the middle of the project.
View detail
Design is ○
The design is unique, but the Pipe diameter seems a bit thin.
In fact, when the moss is removed, it is the same with all the other products.
The product itself is quite sophisticated and can be installed without difficulty.
View detail
Large Variety Satisfaction
It was shipped from overseas and was delivered 1.5 months earlier than the scheduled date.
The packaging was well packed with cushioning material and was very careful.
Thank you very much.
It is surprisingly heavy, but since it is steel, I think that's about it.
Motorcycle will be installed after delivery.
I am looking forward to seeing the cosmetic fit.
If I find something better, I would like to buy it again.
View detail
Maybe it needs a little tweaking.
It depends on the type of car and the manufacturer. In my case, both engine bolts in Included Parts:were Nut, so I was worried about Torque, so I welded one of them to be Bolt&Nut like OEM and made it into Engine bolt. That is all. View detail
Fits: KAWASAKI ESTRELLA, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
Once installed, there was no sign of tipping over.
I bought the car after my son crashed it shortly after delivery.
We looked for OEM and Others and decided to go with DAYTONA in Black.
Even when installed on a car body, it looks like an OEM Product.
After installation, there is not even a sign of tipping over. (Lol)
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
Simple and hope to never use them
Nice genuine accessory that I believe is more classy than typical frame sliders in my option. It is in keeping with the lines of the bike and does not jar the overall apperance of the cb400sf. View detail
perfect Fit good product
First, that got the package was well packed. everything was tidy in the box with protections to prevent damage from the delivery. when I unpacked the package everything was perfect. It's really easy in to install while following the instruction book. as you can the picture, it's really tidy and clean with good quality of hardwares. it looks very nice on my bike and is well protected for the bike. View detail
It was like a kind of insurance policy.
I unpacked and installed the product as soon as it arrived. The Bolt on the engine hanger was once removed from the quantity:Pair (for Left and Right) To prevent the Engine from falling off, the Quantity:Pair (for Left and Right) We worked on one side at a time without removing the
Other than that, there did not seem to be anything of particular note in the installation process. The precision of the product was excellent, and even without applying excessive force, there was no error in the positioning of the Bolt, and the work proceeded very smoothly. The work took approximately 10 minutes.
The instruction manual is very easy to read, and the order of bolt and collar installation and torque tightening are also well described, so we did not have to refer to the thick service manual every time we needed to tighten the bolt and collar. It may be a trivial matter, but such attention to detail in the Instruction Manual was very helpful.
For reference, we have included a photo after installation.
The inside of the guard bar is made of material.:RubberBumper is also attached and seems to prevent good contact with the Body.
The only point that may be a concern is that it may give the impression of spoiling the original SMART Silhouette somewhat. Personally, I think this is acceptable enough.
View detail
I can't install it!
As mentioned in the Review, the position of the Bracket was not correct and could not be installed. View detail
for Fog Lamp
Headlight of CT110 HUNTER CUB is dark. Since it is used for commuting, it should be bright and prominent. View detail
I purchased this product to install a Fog Lamp.
I installed it on a 2020 vstrom 650.
Even with Under Cowl, you can still manage to install it.
I'm happy to see that the Fog Lamp I wanted has been installed!
View detail