Reviews
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
CROSS CUB would be this!
Excellent stability, especially when loaded with Large luggage
Much more stable than DRC's LongSTAND
The base is wobbly, but according to the Instruction Manual, that is the spec.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
ยางรองขาตั้ง kijima อันนี้รูปทรงกวนๆดีครับ ช่วยได้เวลาลืมเอาขาตั้งขึ้น ขี่ออกรถไปเวลาโดนพื้นถนนจะดีดขึ้นเข้าที่ครับ View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300SUPERTouring
About our products
I thought it was not as good as Design, but the effect and performance are very good. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
A word of stability.
Since I have the Top Case installed, the OEM Side Stand would not be stable when the Top Case is fully loaded and heavy, but the product I purchased this time has eliminated such concerns. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
I've got it.
LargeLargeIt seems to be sturdy even when loaded with luggage, it is solid.
I think the best length for me, considering various situations, would be somewhere in between NORMAL and NORMAL.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
I can't go back to NORMAL.
Motorcycle is much more stable than NORMAL.
I can't go back to NORMAL anymore.
As others have written.
The gap between the Bracket and the STAND is governed by the gap between the Bracket and the STAND.
Do not install as is.
It is necessary to devise a way to narrow the gap by hitting it with Hammeretc.
Did I put in RubberWasher?
In any case, simply replacing them will make stopping much less frustrating.
I'm currently also using KITAKO's for RightSide Stand, but
If possible, I would like you to make a for RightSide Stand with this Concept.
View detail
I think it's good
It would be nice to be able to install it at the same time as Rear Sets. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
A little ingenuity goes a long way.
As others have said, it is solidly built and more stable than OEMSTAND.
However, when installed as is, the gap between the STAND and the bracket is larger than that of the OEM, resulting in rattling.
Even when the bolt is tightened, the STAND wobbles because of the play.
After trying various options, I found that inserting the Spacer from KITACO reduced the play and made it feel better.
Since the complete elimination of play would result in the transmission of shock, we chose Spacer, which still has a little play.
I will write down the part numbers for your reference.
KITACO Spacer SIMM
0900-463-90006
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
Very good
The OEM Product was so short that I thought it was made with the shortest length due to the reduction in cost, and the angle was very standing up and there was no room to spare.
It would be even more unstable if a heavy load were placed in the back.
This KIJIMAOther Brand Product is long enough to extend to the Left Side, and the STAND stands sturdily and stably.
Also, the ground contact area is large, so there is no chance of dizzying on Asphalt roads in midsummer or on dirt roads in Hokkaido.
It is rugged but seems to be very practical.
When I tried to turn the mounting bolt to remove the OEMSide Stand at the time of installation, but it was too hard to turn with the crappy Spanner I had with me. I brought it to Motorcycle store and asked them to remove and install it for a labor charge. (Lol)
View detail
Stability is Up!
Stability has been improved, such as on gravel.
The wide surface support reduces sinking even in muddy conditions.
The thickness of the Plate is just right, not too thick, so the body of the car does not stand up too much when STAND is put out.
The stick that makes it easier to get STAND out will hit your calf if you are not used to it, but once you get used to it, it is LARGE sturdy.
View detail
fast delivery good
I've been using it for a long time, so of course I trusted it and ordered it! Delivery is fast and it is good that it fits perfectly to the zoomer. Sometimes there were some mistakes because the welding of the zoomer chassis did not match, but the Kijima stand came out exactly and I bought it with confidence! I will use it again next time. Thank you. I've been using it for a long time, so of course I trusted it and ordered it! Delivery is fast and it is good that it is installed to fit the zoomer Sometimes the Zummer chassis was welded wrong, so I bought the Kijima stand with confidence! I will use it again next time thank you. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
With Impact
I put it on my AC09 JAZZ and it was EXACTLY! View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
Fun Style
I'm not sure what to make of it. I'm not sure what to say about the style, but it looks a bit bulky and it sticks out from the side step when in use, so I think it's unnecessary for street use. I think it is not necessary for street use. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
mounted on my littlecub
Nice little detail that immediately catches the eye If you want something nice for your littlecub and little money I can recommend this one. You have them in different colors View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
I replaced it because it was OEM tattered.
I just put it on and it was pretty easy to install. The texture looks better than OEM Product. The custom look and feel is also good. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
It didn't fit.
CT125. You can't use it for the CT125, though it will hit in a search for View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
It is the installation other than the compatible car.
I made a Bracket for the APE because it looked so cute. I made a Bracket for my APE. View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
Removing the OEM is the Large Variant Series
I installed it on my LITTLE CUB. It's insanely cute!
I'm happy with the way it looks.
Just a problem, OEM removal is stiff!
It was hard to remove the OEM that had hardened and stuck over the years.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
My favorite
It's a great attention-grabber, and if you install it on the CROSSCUB110 and CROSS CUB50, it's going to be great! It's lovely! And the old
I've been approached by the gals, by the neighborhood ladies, and by old men
View detail