【KIJIMA】Side StandRubber Review
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50,
I replaced it because it was OEM tattered.
I just put it on and it was pretty easy to install. The texture looks better than OEM Product. The custom look and feel is also good.
Responses
Other reviews
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail