Reviews
For practical users
NORMAL JA58, but installed ahead of time in anticipation of future Case installation.
Installation can be done by beginners. Even an inexpensive box wrench set can be used.
The mountainous point is when putting the Spring back in and when removing the STAND axis Screw.
Note that the STAND axis Screw is an Opposite Thread Screw.
The quality of the material is good, but either the jig is wrong or our vehicle is wrong.
Merit does not seem to fall over even when SIDE hung with luggage loaded in the cargo bed.
Durable due to solid color and structure, NORMAL looking.
Demerit is heavy (this is a TradeOff relationship with durability and reliability, so it can't be helped)
If you like the NORMAL style, don't carry luggage, or don't attach boxes, these parts are meaningless. It will only make the car heavier and worsen fuel consumption and steering stability.
It is designed for touring and people who carry a large amount of luggage.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I think it should be a little shorter.
The quality of the product itself is good, but when installed, it directly hits the exhaust pipe, so countermeasures are necessary.
4.I installed it on a 5cmLowdown body, but I don't feel that it deepens the bank angle when stopping too much,
I think it would be better if it were shorter.
Overall, it is not very effective for the price, and if you consider it a return on investment, you may not want to do it.
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT /5
It would be unstable.
I can't flatten myself on the ground. View detail
Fits: HONDA monkey, HONDA monkey, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY BAJA, HONDA MONKEY BAJA
Note that R is thick.
I had to return it because the R near the Bolt hole for the STAND was not smooth, but was cut roughly and interfered with the STAND, so the Bolt could not go through.
Maybe if it's not defective, it should install easily and without problems.
Compared to the Side Stand Bracket from another company, it looks like the R part around the bolt that goes through the STAND is thicker, so if you have a machine like a Grinder that can grind it off, you'll be safe.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It can be used for New ModelGSX1300R HAYABUSA.
I bought this after checking that the part number had not changed from the second generation GSX1300R HAYABUSA.
I think the strength is not a problem because we sell OEM Product by processing
It is said that it is 2cm short, but when I put it side by side, I can't feel the difference so much.
You can try to replace it. 'A little more Motorcycle leaning, perhaps? It was about the same change.
Unfortunately, the angle of the welded steel plate is not correct and the gap with the ground is too large.
It might be better to have a shop that can weld make a custom one for you!
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
It's a pain to put on:。。。。
I like the low price.
My useMotorcycle is SUPER CUB125, but it is too much trouble to put on.
Cowl the whole thing has to be removed so 、、、、 it's a pain.
View detail
For something so expensive?
It's called Long Side Stand which is close to OEM.
Because of the shape and color, I decided to use this Spec. of SpecificationsEngineerRing.
The price is more expensive than other Manufactures.
I contacted the manufacturer in advance for the full length of the product.
The only answer I got was that it was 00mm up from OEM, but they didn't tell me the length of the mounting hole & rarr; tip.
Craftman of the current Spec. is trading hole center→Tip:260mm
SpecificationsEngineerRing30mm Up was 270mm.
The clearance of the mounting part is wide, and the inclination was the same even if the gap is 10mm longer than the large threshold.
Spring hooking groove is narrow and Quantity:The GPZ900R with 2pcSpring has one sticking out.
Craftman is far superior in quality.
I'm going to use it as is because I want it to look OEM, but
I think the price is too high.
View detail
Did you pull a HaGap?
I installed it by myself, but the Center of the Bolt hole is not correct, so when I install the collar and insert the Bolt, it gaps about 0.5mm and the screw does not go in.
I was able to install the collar by enlarging the hole on the collar mounting side.
It works well with the company's Down Link and has a good standing Balance.
View detail
Fits: KAWASAKI Ninja 650, KAWASAKI ZX-10R, KAWASAKI NINJA1000 (Z1000SX)
It looks like a square board.
It's not cool when you put up a stand, but it's pretty stable when you put up a stand, and it doesn't look good, but I'm going to change it to a different stand cover View detail
Staggeringly desk-bound product
First things first.
Unless you're a pro with some degree of do-it-yourself savvy, there's nothing you can do about it.
If you're looking for a way to stay in place and say, "Hey, turn around!
First of all, I can only assume that whoever made this thing didn't actually use the CT125 CT110 HUNTER CUB.
If you try to ride a little bit, you shouldn't realize that the Side Stand angle is too much for you to sleep on, …………
It's a fatal point of the Uli's Adjust function. The Stainless SteelAll Screw is turned to adjust the length of the side stand, but even if the length is set to Large, it's only the same length as the normal side stand.
It is possible to adjust the side stand which is too much sleep to make it lie down further, or Level which makes you doubt your sanity.
I'd love to hear what they made it adjustable for.
Furthermore, I tried to install it, but the opening of the upper recess on the Side Stand side was too large, so I tentatively assembled it, and it rattled ……………
We're running out of time.
I think that it can be managed by procuring a Washer or Spacer that fills the gap between the rattling, or cutting a hole in the aluminum plate if it is made to be used somehow. hellip;……… …
As for the height, in case you're wondering, STAND's feet are wide and have holes in the four corners.
If I can get a hard rubber board of the height you want to earn and drilled and bolted it up, I can make it work, but …………………
I feel like I've been grabbed by a hell of a HaGap for the first time in a long time.
I think you should have at least a countermeasure Washer in the package ω
If you have any intelligence, you should extend the All Screw section a few more inches now.
I'll report back when I've done the DIY.
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
I don't even think it's new.
Maybe it's just a matter of price, but
Nut is rusty. The paint is peeling.
Painting is required for installation.
Maybe it's not a problem in terms of yesterday.
Quality control? It's like.
View detail
Installed on SUPER CUB110
I bought the one for the LITTLE CUB by mistake, but I thought I could install it on the SUPER CUB110 as well.
I bought it because it's quite handy when you're camping, etc.
The texture is quite solid and feels like it's made in Japan as expected.
I tried bending it with a lot of force and it didn't distort at all, so I think it's pretty strong.
Since the frame of both LITTLE CUB and SUPER CUB110 are the same, I thought I could use these parts of the frame, but it looks like Daruma (?). does not go in (first picture).
I tried it to see if it was backwards, and it went in here (second picture).
If you try to turn the one that doesn't fit, it seems to be inaccurate because of the lines in the circle (3rd picture).
I struggled for half an hour and tried a lot of things, but I couldn't get it installed even though it was close enough to get in, so I gave up.
I emailed the Manufacturer and after more than a month of trying to contact them, I never heard back, so I stopped installing this product and it is still sitting on the edge of the house.
View detail
I bought it and lost it
I applied Locktite and installed it, but after just a few tours, I was able to get three of them Quantity:2pc. Set is gone Now, the Bolt is a replacement for Spikes Should I have made it a long Bolt from the beginning? View detail
Not same as pic
I got the kick stand but not look the same as a pic at all is kind of west of time , the wrong product that I have is ok just have to make it work very disappoint... View detail
It's not a problem to use
First, my GORILLA is a 4 cm Long Swing Arm, 110-80-8Inch I cannot use DAYTONA 285mm Rear Suspension Spec I looked at the Impression and measured the Side Stand that is now attached to it and it was 175mm It is regrettable that there is no hole in the moving part of sensor, so it needs some processing It is View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Is it unnecessary for MONKEY 125?
Like Grom, MONKEY 125 thinks that it is impossible to start the engine with Side Stand set up.
However, in fact it is possible to start the engine even if the Side Stand stands up.
Then there is no reason to install this part and leave it alone.
Although I should have properly studied, there is also a display of MONKEY 125 in the compatible model at the web shopping.
Manufacturer also did not grasp the possibility Large.
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
To be sorry
I purchased it because it can adjust the height.
When attaching it, the ground plane shifts and only the corner is grounded to the ground.
I bent after I fixed it so that it would not move to carry Motorcycle.
It is still weak compared with OEM.
When carrying, I think that it is better to use another STAND.
View detail
Fits: HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA jazz, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty, HONDA magna fifty
Since it changed into the die length of the pure Front fork from the Long fork, when a Side stands used a STAND by the object for Long forks, the Motorcycle became almost right-angled, and the pure Side stands was looked for, but since it did not come out
Since it changed into the die length of the pure Front fork from the Long fork, when a Side stands used a STAND by the object for Long forks, the Motorcycle became almost right-angled, and the pure Side stands was looked for, but since it did not come out, the shorter one thought that it was good and purchased rather than long.
It actually attaches, and since the Motorcycle is settled in tolerance although it inclined beyond anticipation, I think that it is good.
Since the Motorcycle merely inclined too much, and operation is possible stand [ the STAND of a Motorcycle ], I think that cautions are required.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although attachment took time in position doubling for a while, it was easy. However, since the angle was also fixation short [ the die length of an Arm ], there was only an effect about better than nothing as assistant engine performance when t
Although attachment took time in position doubling for a while, it was easy.
However, since the angle was also fixation short [ the die length of an Arm ], there was only an effect about better than nothing as
assistant engine performance when taking out a STAND.
View detail
"The side stand of NISHIMOTO was attached originally. With lowdown-izing, I wanted the shorter one and purchased this product. Appearance and a using feeling are very good, and I like it. Why is this evaluation of 2 stars? It is because it is written also
"The side stand of NISHIMOTO was attached originally. With lowdown-izing, I wanted the shorter one and purchased this product. Appearance and a using feeling are very good, and I like it. Why is this evaluation of 2 stars? It is because it is written also in the others impressions, but when attaching to my zoomer (ruckus), a frame and form of the components put in inside did not suit, and I deleted and united it. Although it may be the individual specificity of vehicles, shaving and attaching a new product is something bad feeling." View detail