Reviews
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
PMC Adjustable side stand
The movable part of OEM's Side Stand worn out. It's pretty pretty so I bought it.
Easy to install and adjust the length of the STAND is also easy. However, I fixed it with Screw lock because it will become loose during driving.
I am satisfied that it looks cool as well.
View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
MajestyS Side StandS / W Can Sera Installation.
☆ Majesty S, installation location.
Remove Side cowl of Right Side and Side StandS / Wiring from W is Blue Coupler..
After that, remove the Coupler and install the product and the work is completed.
* We are wearing DAYTONA's Suspension and Lowdown Bracket, and it was in a state where Center Stand can not be used.
During the morning's warming, I am glad that the Engine hangs with the Side Stand coming out (* '艸 `)
View detail
Totally good products
Simultaneous installation with the company's Rear Sets installation
STAND is easier to apply than OEM, and of course there is nothing to hinder Shift change
Well, in individual differences and Setting situations Length may not match, but in my Motorcycle there was no problem.
View detail
It is good to be able to adjust!
I used it for Grom's 181 Full Custom.
Even at Grom Meeting, there was no person exchanging until Side Stand, and there was a sense of superiority.
Exchange of Front's Inner and Rear suspension, the car height was a little higher, the inclination of Motorcycle was getting stronger.
However, this item can adjust the length.
When it stretched about 15 mm from NORMAL, it got a good gradient, and it looked more like a custom motorcycle.
Although it is the preciseness of the Cut-out of the bottom, I feel that it is somewhat inferior to Takekawa etc..
But, this may be normal.
It feels like running, but there is no rubbing even if it is banked, there is no funny feeling at all.
From this price, I think that it is a good product.
View detail
I can stop with confidence
It's very easy to install because it's just sandwiching.
As a performance I was able to park with confidence on the rain camping place, on the turf.
Because it is a special item, you can choose colors without interference with Chain. However, because there is a thickness, when STAND is set up, we recommend that you check firmly as you may get to the ground before you can stand.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
I needed strength unexpectedly
900 NINJA to 17 in. It became necessary as I changed it. I needed a lot of strength to install Spring. It is only there that suffered
In my case (GALE SPEEDRear 4. 50 Inch wheel, Eccentric reverse attachment, TireMichelin PP2CT, car height adjustment is not assembled) 20mm Long was just right. It is slightly upright. When stopping, it is scary unless you leave Handlebar to Left firmly.
View detail
To respond to changes in car height ...
Because I got too sleepy in OEMSTAND where I lowered the car height that accompanied with Rear 17 ", it was good to have exchanged ... before Damage came to Frame, anxiety. Suspended to the maximum Large limit.
I chose this because I heard that the adjustment formula is not good, but I would like to think about whether to add additional vehicle height or use Long Type End eye or extend Swingarm.
I would appreciate it if there is an indication of how high the car height is supposed.
It will be difficult, but.
View detail
STAND became easier to put out.
I decided to purchase because OEMParts was cheap and difficult to put out rather than for Dress-up. Although it is a slightly flashy product, I may have matched the car body because I installed a lot of Optional parts. It is a solid making, but the welded part felt somewhat sloppy. Since there was a possibility of knocking down the car body without installation, there was a possibility of knocking down the car body, so we completed installation in a short time, but because it is a shape that does not firmly adhere to the ground surface, unlike "OEM Product, Grassy etc etc. Please be careful when parking in.
I was told that it is a passing point Total.
View detail
Fits: YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street
good
Easy to install, perfect looking.
It's really nice..
Because it is for TREET, it is not short, not long
Just right
I am installing today, so it will be durable afterwards.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Texture is good.
Making and texture are good, but there was more weight than I thought.
I think that the amount of gold is also high, but I think that it is optimal for vehicles that raised the car.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
There is no difference between the clouds
This time, following the ADDRESS 110, it was mounted on PCX 125 delivered suddenly.
It is very convenient for photography of commuter buddy & touring.
Until now, when I got to a vending machine, it was EngineOFF every time,
None after wearing this!
I found a composition that I liked in the middle of the morning sun and the landscape,
Stand up Side Stand, take a picture.
You can start off without having to restart.
When installing, you have to remove Under Cowl,
Because it is not such a difficult part, please only be careful of nail folding.
I can keep on riding more securely than pulling out Sensor's Bolt.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
This is required
I changed to MULTISTRADA 1200. In accordance with transfer, we purchased various information on Net, but this is the best thing that cheaper and the effect was visible.
As I refer to other people's impressions, the gold amount was cheap so I tried installing it at the time of car delivery, but there is no sense of security at presence or absence. When getting off Motorcycle, I think that it is mostly better to get off Side Stand, but MULTISTRADA does not know where Side Stand can not see from the top in a sitting state (I think that you will understand if you get used to it).
I barely saw in this state that I was able to withdraw Side Stand by somehow only with this installed product.
From the perspective of Design importance, I think this product is a pros and cons, but from the standpoint of standstill prevention, I think this product is essential.
Regarding price, other parts are expensive so it may have been A little paralyzed, but I think that it is a price.
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI ADDRESSV125S
Recommended use at your own risk.
Attached to new model ADDRESS 110.
I also thought about winding out with Wiring and wrapping it with WaterproofTape, but it is easy to install and easy to distinguish between Green and White, so choose here!
As a result, even when taking a picture such as taking a picture, Engine will not stop as satisfactorily and satisfied!
It became easy to warm up!
View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
Useful Items
MAJESTYS 'Side stands switchCancellation.
Installation is easy. You can recommend it because it will be convenient only by attaching this.
There is neither good nor bad building. I think that I can build it by myself, but it is cheaper to purchase if I think about the trouble.
View detail
It may be a pain if the shape does not match
The goods themselves are well made, painting is also beautiful and perfect.
I also say other people but it will be a hard time if the shape does not fit.
In my case, the shape did not fit, I dropped it all by iron file for about 1 or 2 hours.
It was hard for Parts itself to be hard and not to be able to easily scrape.
I think that work can be shortened considerably if you have Disc Grinder.
I think that you can work on Smooth if you prepare the paint for the Rust prevention measure of the shaved part.
Looking at the above, I think that only Minus, Design - Easy to use, Large I am strange.
View detail
Fits: SUZUKI swish, SUZUKI ADDRESS110, SUZUKI Address125, SUZUKI ADDRESSV125S
Easy operation!
It is a handy part that can be easily canceled without preparing anything in advance at reasonable price.
There are various ways of Cancellation,
Yes, just pull this part in and out.
Usage? Each person.
Effect? ??It's amazingly convenient !!
View detail
I bought it for CROSSCUB.
I bought it for CROSSCUB. I think that I do not use it much, but I think that Right Side can also support Motorcycle and it is a useful product. I think that it is a recommended product. View detail
With 10 IN dedicated STAND!
By the time we customized it 20 years ago, we only had an expensive Side Stand of a famous Manufacturer, so we extended the Side Stand for 8 Inch by welding
But since this price, we purchased immediately without thinking welding etc.
It is a place to worry about the strength of the ground contact area and the feeling of painting, but I would like to check it in the future
For 10 Inch, 12 cm Long, 300 mm Shock combination, it was Side Stand with a good slope
View detail
Fits: YAMAHA Cygnus X, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA AxisZ, YAMAHA NMax
Depending on generation, Large changeable recommendation.
For me who was an original Chari Small priest in the 1980s, I felt very uncomfortable with the recent unexpected safety measures that the Engine stopped when I took down Side Stand. I still do not get used to it..... Side stands There was also a hand to physically open the switch, but it is inexpensive because we have exclusive items well so I bought it.
There is a manual also finished work in about 5 minutes, finally released from that sense of incongruity.
View detail
GCraft Aluminum Stand
It is for APE but installed in GROM. It is convenient because you can adjust Length. Just because GROM is heavier than other 4 mini, the tip is small, so it is a little unstable so I think I need attention when I can stop. View detail