Reviews
sv650KIJIMAEngine Guard
KIJIMAEngine Guard installed on sv650.:Pair (for Left and Right) The part that connects the Quantity with the Lock nut is the Quantity:Pair (for Left and Right) It was difficult to tighten evenly. Other than that, it is easy. I am not sure how effective it is, but I like it because it is firm and comfortable. View detail
… Failure.
It is not attached to the '23 model because of a model type mistake.
I gave it to a friend.
View detail
Universal Engine Guard
Not only does it simply protect your motorcycle, but it is also highly universal as it can be fitted with a variety of accessories.
Installation requires a panda jack or Torque wrench, so it is not easy for everyone, but in the end, it is a Bolt On product in the extreme, since all you have to do is remove the Bolt and install it.
Panda Jack and Torque wrench are cheap enough, so if you need to buy more, it will cost about 5000 yen or so, or about 15,000 yen if you order from the Shop.
It is easy to do if you watch YouTube for reference.
Drink holder, Glass Holder, Tool Box and Fog Lamp
Multi Bar named Engine Guard.
Since other companies' Engine Guard cannot be installed in various ways, I recommend this product from KIJIMA.
View detail
I like it.
While choosing a product that would suit the z900rs and also provide reliable protection to the engine cover in case it falls over, I chose a product that seemed to have an appropriate size and wide protection range. When I received it in person, it was as good as I expected. -------------------------------------------------- -------- In the case of the Z900RS, but in the case of falling in place, I chose the product, which has a suitable size and a wide range of protection while choosing a product that can certainly protect the engine cover. It was as good as I expected when I received it in real life. Powered by Google Translator View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Neat product
I previously installed a K-speed bumper guard, but I didn't like it because it was a plastic injection product and was attached with a sticker.
While searching for we bikes, I found the Kijima bumper guard and installed it.
Products imported into Korea can only be installed if the license plate bracket is replaced. -------------------------------------------------- -------- I didn't like it because it was attached to K-SPEED Bumper Guard, but it was attached as a plastic injection product. While searching for Webike, I searched for Kijima Bumper Guard. Products imported in Korea can be installed only by replacing the license plate bracket. Powered by Google Translator
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
CROSS CUB would be this!
Excellent stability, especially when loaded with Large luggage
Much more stable than DRC's LongSTAND
The base is wobbly, but according to the Instruction Manual, that is the spec.
View detail
big
Slightly protruding? In the event of a fall
LargeDurable?
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Dress-up effect
The Instruction Manual says to remove the Rear Carrier, so I expected to do a lot of work, but the point is that the Hexagon Socket Bolt on the Stop Lamp should turn. If you use this rough technique, you can install the carriers by simply removing and attaching the plate. I removed only the bolt fixing the carrier and floated the rear suspension bolt on the axis at an angle.
The upper side has a long hole so that it can be adjusted so that it does not contact the Stop-lamp, but it does hit the Blinker hard enough to make an individual difference. It seems to be able to prevent a thin branch, but it seems to be not so effective as a Guard. It is a good for dress-up purpose because it becomes a robust Image.
View detail
Good
The price is a little high, but it has good footing.
STAND is hard, which helps.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50PRO, HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CRM50, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA FTR250, HONDA MBX50, HONDA MT125ELSINORE, HONDA NS50F, HONDA NS50F, HONDA NSR50, HONDA NSR50
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Fairly subtle.
Worn on Harley XL1200C SPORTSTER 1200 xl1200cx
Frankly, it's better than nothing,
Level.
First, the position is low.
I think a higher position would work if it could be done.
In addition, the position of the notch where the Engine is fixed is not aligned.
The FrontEngine side is not firmly fitted and is shallow.
Coating is solid and non-slip.
For these reasons, the value of buying
View detail
Rust and peeling paint
I had them installed by Yamaha when my car was new and they rusted and the paint peeled off after about a year, even though it was not in a wet environment. Worst quality ever.
The paint is not adhered to the Gold genus, so if you scrape it with your fingernail, the paint will peel off.
Motorcycle is Polished everywhere, only this part is already dead.
View detail
Fits: HONDA C70 A-PASSPORT, HONDA C70/71/72 (DREAM), HONDA CB125S, HONDA CH150 A-ELITE 150, HONDA CH150D AC-ELITE 150 DELUXE, HONDA CT125 A-TRAIL 125 S, HONDA CT70 TRAIL 70, HONDA TLR200, HONDA XL100 A, HONDA XL100S, HONDA XL125, HONDA XL70 A, HONDA XL75, HONDA ZB50 A, HONDA SUPER CUB110PRO, HONDA BENLY50CD90, HONDA LITTLE CUB, HONDA SUPER CUB 90, HONDA SUPER CUB70, HONDA SUPER CUB 50PRO
ยางรองขาตั้ง kijima อันนี้รูปทรงกวนๆดีครับ ช่วยได้เวลาลืมเอาขาตั้งขึ้น ขี่ออกรถไปเวลาโดนพื้นถนนจะดีดขึ้นเข้าที่ครับ View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 Super Four, HONDA CB1300SUPERTouring
About our products
I thought it was not as good as Design, but the effect and performance are very good. View detail
Add photo
After installation, I haven't mossed it yet, so the protective properties are fumi-rice. View detail
Fits: HARLEY-DAVIDSON XL1200CX, HARLEY-DAVIDSON XL1200N, HARLEY-DAVIDSON XL1200NS, HARLEY-DAVIDSON XL1200T, HARLEY-DAVIDSON XL1200X, HARLEY-DAVIDSON XL1200XS, HARLEY-DAVIDSON XL883L, HARLEY-DAVIDSON XL883N
XL1200XS
I wonder if it's easier to get STAND in and out. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
A word of stability.
Since I have the Top Case installed, the OEM Side Stand would not be stable when the Top Case is fully loaded and heavy, but the product I purchased this time has eliminated such concerns. View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
I've got it.
LargeLargeIt seems to be sturdy even when loaded with luggage, it is solid.
I think the best length for me, considering various situations, would be somewhere in between NORMAL and NORMAL.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSSCUB110 Kumamon VERSION, HONDA CROSSCUB110
I can't go back to NORMAL.
Motorcycle is much more stable than NORMAL.
I can't go back to NORMAL anymore.
As others have written.
The gap between the Bracket and the STAND is governed by the gap between the Bracket and the STAND.
Do not install as is.
It is necessary to devise a way to narrow the gap by hitting it with Hammeretc.
Did I put in RubberWasher?
In any case, simply replacing them will make stopping much less frustrating.
I'm currently also using KITAKO's for RightSide Stand, but
If possible, I would like you to make a for RightSide Stand with this Concept.
View detail
I think it's good
It would be nice to be able to install it at the same time as Rear Sets. View detail