Reviews
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Good shape!
The streamlined shape is very cool, not the common Round Type.
The price is higher but it is a good buy because it reduces direct Damage to Cowl.
View detail
Slider for 23 years
We selected it as a Slider that has been on the market for less than six months and is compatible with the product.
The installation itself is not difficult, but since there are several screws with different Hexa diameters, you should make sure that you have a HexaWrench of that size before installation.
I like it very much because it is very close to Cowl's color.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
It is taller but more Compact than OEM.
Since it is a car model-specific part, it can be attached tightly and comfortably.
To install, simply remove the Under Cowl and screw the Base onto the OEM Slider, then put the Under Cowl back on and screw the Body onto the Base.
Personally, I think it would have been better if the angle of the body could be fixed by a notch or something like that.
I really like the product itself, both the texture and the shape Parenthesis.
View detail
Review for the classic style (round) sliders
Good looking frame sliders, overall build quality is very good. The mechanism for installing the slider into the bike frame hole is a pair of aluminium plugs that are threaded onto the bolt for the slider. The end plug has a small cutout for the original engine bolt head to rest against. When the slider is tightened into place, the two plugs are forced together & expand, securing the slider in place. I have no idea how well this product will perform in a crash, but it appears sturdy enough to protect against tip overs at least. View detail
Fits: KAWASAKI Z250 (2013-), KAWASAKI NINJA300, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR
Axle Shaft Replacement
OEMShaft was shaved off due to a fender bender and replaced.
The first difference with OEM is that it eliminates the need to use Split Pin.
This will lead to a MechanicalAdvantage when changing Tire later on.
Next, reduce Damage to Axle Shaft and Handlebar in the event of a fall.
Slider itself is an expensive consumable item, but it is a small expense considering the damage to the handlebar, footpeg, exhaust system, etc. when it falls over.
The 5mm hex Cap bolt allows for quick replacement.
Demerit is that there is no Instruction Manual for handling.
I am not sure about the Torque for tightening the Cap bolt and Axle Nut.
I had no choice but to tighten the nut side with the OEM specified torque and the cap bolt with 10Nm, but I am not sure if it is correct or not.
Next, Cap bolt must be visible.
There was a scattering of imprints that pointed out a few things, so it is possible that rust will occur over time.
If this is the case, please purchase a separate Cap cover.
When installing, be sure to apply grease to the shaft.
I applied Bell Hammer Grease No.0 to the wheel side and No.2 to the nut side to prevent rust, lubrication, scratches, and friction loss.
Unlike hollow shafts, the most outstanding feature of this product is that it can be easily installed and removed, but the lack of a handling instruction manual is the minus point.
The Ninja 250R and Ninja 250 are compatible with this model. (EX250L/M・EX250P) Therefore, it is recommended that you make sure that your motorcycle is compatible with the system.
View detail
Wow that's cool
It was bigger than I expected.
It's best not to fall over, but, well, Large seems sturdy.
To install, simply insert it into the hole and tighten with an 8mm Hexagonal Wrench.
It said to tighten at 40N, but there was only Torque wrench up to 25N, so I may have to check for looseness or something every now and then.
View detail
Fits: KAWASAKI Ninja H2 SX SE +, KAWASAKI Ninja H2 SX SE, KAWASAKI Ninja H2 SX
I hope I never have to use it.
It was installed to reduce damage in the event of a fall.
I chose typeE because I preferred this shape.
View detail
Think of it as a good luck charm.
If you fall over and repair or replace Cowl or Leveretc. it may not be worth 20,000 to 30,000.
I am Touring is Main, but when I took delivery of my current 10R, I decided to put it on as a good luck charm.
With 10R, it is easy to work without removing the cowl.
Since it is a Slider, it may seem poor in the event of a fall compared to the Guard, but with or without it, there is a difference in the sense of security.
Also, it looks cool.
View detail
Fits: KAWASAKI Z1000, KAWASAKI , KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
Trickster's Front Axle Slider
I wanted a Simple Front Axle Slider and this was it. I haven't rolled it so I don't know how effective it is, but I also think it looks good while being Simple. I think it's a good product in terms of what kind of atmosphere I want my vehicle to have, and in terms of damage reduction in case of an emergency! View detail
Not much in this form.
[How is it used?
Engine Guard...right?
I put it on when I took delivery of my car. It was cool because it was a design (at the time) that no other company had.
I have decided. Installation will be with the car when it is delivered.
How was your experience with it?
I have not used it w I hope that I will never have to use it.
View detail
Pricey, but the stuff is good.
[How is it used?
Fits ZX-6R 2023
Used for chain adjustment and wheel removal/attachment.
Was the one you received as per Image?
It arrived in beautiful condition with no scratches.
Was the installation difficult?
It is easy to install with Bolt1 pc.
It is necessary to have a certain sense of the material, since the stipulated Torque is not explained in particular, but Material:Since it is a DURACON Slider, even if it becomes Overtorque, the resin part will be crushed, so you may not have to be so nervous.
How was your experience with it?
The common Anodized Treatment Stand Hooks are noticeably scratched and scraped when used, so even if it is not a problem in practical use, it is bothersome.:I chose DURACON, and even with DURACON, scratches will appear, but they will not be like peeling paint, so they are somewhat less noticeable.
The fact that it also doubles as a Swing Arm Slider was another point that led us to purchase it.
Material on all SS such as ZX-6R.:AluminumSwing Arm is vulnerable to strong impacts and is expensive, so we chose Stand Hook, which offers the best protection possible.
[Was there anything that disappointed you?
It's a little pricey, and I wish it were cheaper since it's UniversalParts, but the thing is well made.
[Good to have].
BoltMarker, Screw lock agent
It depends on how often you use the Stand Hook and how often you ride your motorcycle, but I think it would be safer to have a stand hook because it is also a place where loads are applied.
View detail
Slider
I was told that it is better to fix it to the Engine than to attach it to the Frame.
I purchased it. I don't know how well it performs because I haven't mocked it up yet.
Installation is easy (The process of removing Cowl is troublesome.)
I think it looks good Parenthesis well.
View detail
Parenthesis good at best.
It is the quintessential Trickster.
It is also highly accurate and gives a sense of high quality.
I was not comfortable with the cylindrical shape, so I went with this one, but I am satisfied with the Parenthesis and Large.
View detail
Best Look!!
This is the best-looking I've ever seen Material and appearance are very nice Fits perfectly with my bike I love it so much Installation is very easy *Quality check should be improved View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
Trickster for Kawasaki cars
Low cost compared to other companies.
I bought these parts because they protected my front fork when I crashed in the Circuit on another vehicle.
I don't want to try it again (laughs).
View detail
It is easy to install.Stand Hook。
It is easy to install. View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-14R, KAWASAKI ZX-6R, KAWASAKI ZZR1400, KAWASAKI ZZR1400
TricksterFront Axle Slider
Slider, the last resort, all put together by Trickster.
A sense of unity - wonderful!
View detail
TricksterFrame Slider
I love the 3-piece set.
Trickster
Frame Slider、Front Axle Slider、
TricksterLever GuardQuantity:Set Kawasakifor VehicleGreen Light
I am satisfied with Large change
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900, KAWASAKI Z900RS
Frame Slider
It is easy to install. Repair parts are also available.
Be careful not to order Repair Parts.
View detail
Fits: KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
The OEM has folded
When I fell over with the OEM Slider, it snapped and shaved the cowl, so I installed a replacement.
I understand the part about breaking it to release the impact, but I'm afraid of getting my foot caught or injured, so next time I'll get something that's harder to break!
When I was choosing a new product, I had the opportunity to learn about the condition of a fall during a race run with this product, and I felt confident that this would be a good choice.
View detail