Reviews
Simple stand hook roller
[How is it used?
YamahaYZF-R1 (2CR) The stand hook is used as a Stand Hook for the
I would have been happy with any manufacturer's product, but I bought it because it was an inexpensive and reliable MORIWAKI product.
Was the one you received as per Image?
The quality and texture were absolutely perfect.
I'm not sure about the M6 Bolt, as it is a Yamaha car. (Lol)
Was the installation difficult?
It takes less than a minute to install because all you have to do is round and round with a Hexagonal Wrench.
How was your experience with it?
Simple stand hook roller.
There is nothing special to mention, but it is working fine.
[Included Parts:were they on?
Quantity as shown in the product image:It arrived as a Set.
[Was there anything that disappointed you?
Not particularly
【Review】
This stand hook roller is inexpensive and safe to use.
If you are not particularly particular about the design aspect, I would recommend it.
View detail
If it's an off-road vehicle, I'd like to have it.
DF200 DJEBEL does not have an Under Guard, even though it is an off-road motorcycle.
When driving on rough roads, Crankcase and Frame are covered with quite a bit of mud, and I think Small stones are also bouncing up and down.
On one occasion, a large branch was stuck in the crevice between the Crankcase and the Frame.
So, I took the plunge and bought it.
As it is an Exclusive Design product of the car model, we did not have to worry about the installation, and it was installed EXACTLY.
Front Fender and Side cover are White Material.:Because it is Plastic, it fits in as if it had been there from the beginning.
The DF200 DJEBEL/125 is small enough to cover only the lower part of the crankcase and the under frame, and the drain bolt is notched in a round shape.
Scraping out the mud that gets between the Crankcase and the Crankcase is also a simple matter of keeping it attached.
The price is a bit high.
However, I am grateful that they still continue to sell Parts for the DF200 DJEBEL, and if I think of it as the price Gold, it makes sense.
View detail
good-looking
It sticks tight like OEM. The ankle grips are good and easy to stand on. The ORing for the fixation may break someday, but it can be fastened with a bundle of wires, and the mechanics at the motorcycle shop liked it. View detail
countermeasure against standing up
Coloring also matched Cafe in Black??Gold.
We won't know the effect until we take it down, but installing it as an insurance policy gave us great peace of mind.
View detail
Fits well on NC750X DCT 2023
Received the order within the week via EMS. Item fits well on my NC750XDCT 2023. Workshop installed the stand and works perfectly although the bike is generally heavy thus can be difficult to mount/dismount. Highly recommended. View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
Purchased outside of the intended use
No quality problems at all.
I purchased it for a non-purpose, but now that its purpose has been defeated, it is in storage.
We have already installed a higher grade Stand Hook on our Motorcycle.
View detail
Stability is improved.
When I loaded the AA04 with luggage, it seemed to fall over when I hung the Side Stand on it, and I was worried about its stability, so I installed it.
The product itself is heavy and solidly built, so durability is not a problem.
Installation takes about 10 minutes if you have the right tools.
View detail
Cutting off the Main Cause of Failure
I have a JumpCoupler that I made by myself, but I wasted the cost of 3.500 for one jump coupler, so it would be better to buy one. It's a WaterproofCoupler, so it's safe from now on! View detail
Unobtrusively Custom
I bought it because I wanted to increase the number of BlackParts as much as possible.
It is also nice to see that the Pipe diameter is slightly larger than OEM.
I was wearing Zita's Under Guard.
The interfering area on the Right Side was shaved off.
View detail
I like it.
While choosing a product that would suit the z900rs and also provide reliable protection to the engine cover in case it falls over, I chose a product that seemed to have an appropriate size and wide protection range. When I received it in person, it was as good as I expected. -------------------------------------------------- -------- In the case of the Z900RS, but in the case of falling in place, I chose the product, which has a suitable size and a wide range of protection while choosing a product that can certainly protect the engine cover. It was as good as I expected when I received it in real life. Powered by Google Translator View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R 40th, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
It's sticking out more than I thought it would, and I think it's going to be effective.
We selected this product as an OEMOption for the purchase of a '24 ZX-6R.
I was wondering if SS would be a good choice for an external Slider without floating? I was also thinking about it, but I chose this one because the OEM seems to have a relatively high reputation.
The real thing looks more outwardly protruding than Cowl, which seems to be more effective...
I don't want to verify (laughs).
View detail
Installation Exactly, looks good.
I am not sure about the protective properties yet. It gives a sense of security. I think it looks good on me. View detail
It's very powerful.
The Pipe diameter is thicker and more powerful than OEM.
The mounting portion also has a sturdy welded joint that will also serve as a guard.
I used to use Diablo's Engine Guard, but it was not rigid and bent when I shook the Engine Guard, but not this one.
I am very satisfied with the shape of the body, which is very sturdy, and when I grab the Guard and shake it, the whole body is shaken.
View detail
It's good quality and pretty.
Changed from K-speed engine giard to daytona engine guard.
The K-speed engine guard does not sell the bumper separately, so the entire bumper must be replaced if it is damaged, but this is not the case with this product.
The shape is also bigger and prettier. -------------------------------------------------- -------- Changed from K-SPEED Engine Giard to DAYTONA Engine Guard. The K-SPEED Engine Guard does not sell the bumper separately, so you have to exchange the whole when it is damaged. The shape is bigger and more beautiful. Powered by Google Translator
View detail
Moriwaki skid plate
From genuine skid plate to Moriwaki skid plate black
There is no difference in functionality, but I liked that it had the brand name moriwaki on it.
Can be installed on Ja65 2023 model. -------------------------------------------------- -------- Moriwaki Skid Plate BLACK from genuine skid plate I changed it, but there was no difference in function, but it was good to have a brand name Moriwaki. JA65 can be mounted on the model in 2023. Powered by Google Translator
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Neat product
I previously installed a K-speed bumper guard, but I didn't like it because it was a plastic injection product and was attached with a sticker.
While searching for we bikes, I found the Kijima bumper guard and installed it.
Products imported into Korea can only be installed if the license plate bracket is replaced. -------------------------------------------------- -------- I didn't like it because it was attached to K-SPEED Bumper Guard, but it was attached as a plastic injection product. While searching for Webike, I searched for Kijima Bumper Guard. Products imported in Korea can be installed only by replacing the license plate bracket. Powered by Google Translator
View detail
Rather, Parts that cure the defects of CT125
The completely unreliable NORMAL Side Stand is changed to a reliable Large Stand.
Before the replacement, it was unreliable with nothing on it.
Installing a Box on the Rear is already on the verge of mocking up.
After replacement, it is so stable that you don't feel the need to add STAND.
The STAND, which was originally squishy, is now tightly
(Endurance does not recommend it) in a STAND out state.
Stable when standing on footpeg
It should be this way from the beginning.
Parts to cure CT125 defects
When replaced, the body of the car is more upright than before.
Handlebar must be turned off to Left to be stable.
Become better at ground under Left than horizontal.
Instruction manual not attached Download required
No mention of pre-installation preparation Unfriendly
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cb400Sf main stand
Wow item is very easy to fix and solid too. Shipment is fantastic! Super fast shipment! Definitely will purchase more! Thanks Webike! View detail
Guard of Engine Guard. w
[How is it used?
I installed an OEM Engine Guard on my KTM390DUKE and added a Slider to prevent damage in the event of a fall! (Lol)
Was the one you received as per Image?
It is burly and looks quite sturdy.
Was the installation difficult?
The installation itself is easy, but since the pipe diameter of KTM's OEM Engine Guard is a bit narrow, we applied thick double-sided tape to the pipe before installing the Slider. Therefore, the slider seems to gap when it tumbles because it is not firmly fixed.
How was your experience with it?
I haven't tipped over yet, so I don't know the true value of the W.
I did not Gap while driving for the moment.
[Included Parts:were they on?
Four Bolts are included.
[Was there anything that disappointed you?
Not particularly
View detail
Required when using Maintenance Stand.
I purchased it together with the Maintenance Stand to replace the ChainMaintenance and Exhaust System. I am very satisfied with the low price and good quality. There is no rattling when using it, and it is very easy to install. I bought it together with Y's Gear's Maintenance Stand, but if you are using yzf-r3.r25 and looking for a Swingarm Spool, I think you can't go wrong if you buy this one. View detail