Reviews
Genuine GBRacing Frame Slider Set for YZF-R6
This bike came in and the customer wanted the full kit of protection for their bike as they were planning on taking it to the track this year. My very first thought was of course GBRacing as they are well reknowned for excellent protection. Webike do stock a lot of GBRacing products for various models and manufacturers. I found the correct part by cross referencing GBRacing website.The price was about the same as I could get locally but they did not have the stock, Webike did. With a few other parts, all shipped by EMS and arrived undamaged in 5 days.These crash protectors are a sturdy piece of kit. You can see that there is a lot of material to wear away before any damage can be made to your engine or surrounding parts. I personally have had a small low side and the crash protector did their job perfectly. With these added, this is what we are hoping for too. The machining is brilliant, very well presented. The bolts they provide which are of course longer than you remove are stainless steel so will be just fine. A word of warning if you do not already know, put a support underneath the engine itself. Just remove one side at a time or you risk the engine dropping and then you might come into difficulty. If all else fails, I do tend to have a jack under the rngine before I remove or even loosen any bolts for these items. Take your time, make sure you do not cross thread the bolts and you will be just fine. Torque to instructions and off you go. Thanks Webike, very happy. View detail
Slider
I installed it myself and it was very easy. I can ride my motorcycle with peace of mind. View detail
2017 CB1100EX Active Frame
Excellent product shipped all the way to Canada very promptly. It is a quality item that I look forward to installing. Customer service from Webike was also excellent and I already have a list of other items that I will be buying from them. View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
Used for ZX-4R
I was worried about whether I could attach it to the 4R because I couldn't find any information about it, but I was able to attach it without any problem. View detail
Easy install, great protection, great quality
Installation on motorcycle frame is easy. Does not require removal of engine mount bolt. The slider mounts using a small hole underneath the main engine bolt. All bolts provided. Tested it by falling my bike over on the left side. Handlebars and footpegs do not touch the ground. Great purchase for the price! Item quality is great. View detail
easy to install engine slider
About quality and texture : solid product build About the feeling of use : i feel safe using this slider on road Products to buy together : u can use this on Gixxer 250 Difficulty of installation : easy , just remove original bolts and install bolts provided Cost performance and comparison with other products , pricey but not easy to find similar high quality products About shipping and packaging : very well packaged, fast shipping Any concerns, cautions, or advice when purchasing : product quality is good View detail
I like it so much
First of all, the delivery is very fast
Product condition, packaging condition, finish, etc.
I like it so much
And the manual was also well packaged.
I wish you all the best in the future...
...
...
...
...
...
...
...
...
...
...
...
...
...------------------------------------------------------------- ----------- First of all, delivery is quietly fast Products, packaging status, finish, etc. I like it so much And the manual has also been well packed Thank you for your future ... Of Of Of Of Of Of Of Of Of Of Of Of Of Of Of Of Powered by Google Translator
View detail
Genuine Polisport Frame Protectors for CRF250R
As this bike does take a lot of stick when it comes to being ridden in bad conditions, the purpose here was to get some better frame protectors. I have personally never used Polisport before but the customer specifically asked for this brand. Finding the part was not difficult at all as Polisport search function is really simple to use and you are greeted with what ever part is needed. The price from Webike was good value as they were actually in a sale at the time of ordering. I do have always some other parts to order so got them all shipped together via EMS. My order arrived very well packaged and 100% perfect condition. The frame porectors themselves a re a nifty piece of work. They are really a really tough rigid plastic composite but have a small amount of bend which makes this easy to fit. The finish and quality of these frame protectors is excellent as far as I can tell. They have a smoothed out matt look which works very well with the bike colour scheme. They attach pretty easily with the cable ties already included. If you wanted to go more permanent you could bond them on but cable ties for if you ever need to change them. Very pleased with this purchase and will look at Polisport in the future for other bikes if needed. Thanks Webike. View detail
Nice and discreet.
The installation method was easy to understand and quick and easy to install.
If the Bolt on the Engine Mount can be removed. But, it's a story of "if".
If you are a woman, or if you are not strong, or if you don't have the proper tools, have the store put them on for you.
I am very satisfied with this product because it is not a big slider, it is small in shape, and it does not require any processing for cowl.
So far I haven't had any help. (Not falling down) I don't know how effective it is.
View detail
Fits: SUZUKI gsx1100s katana (sword), SUZUKI gsx1100s katana (sword)
Slider installation
It is not cheap, but it has a good quality. After installation, I think the parenthesis has improved. I don't know how effective it is because I haven't rolled on it. The installation was done by one person, but it was a little difficult to tighten the wrench lever while pressing it down with my foot from the bottom because it is co-tightened from the Both Sides. View detail
Mast for Exhaust System replacement
Center stand stopper is required when replacing OEM Exhaust System with external Exhaust System.
OEMCenterSTANDStopper is attached to the Exhaust System. The OEMCenterSTANDStopper is attached to the Exhaust System body, but not to the Exhaust System outside the company.
The Center Stand is a part that can be used without hitting the Exhaust System or Frame, or not being able to stand the car body up using the Center Stand.
Quantities of the Center stand stopper frame mounting bracket and rubber, which are lost when the OEM exhaust system is replaced.:FI Vehicles are also acceptable.
good point
Easy to install.
The rubberized stopper absorbs the shock well.
The use of the Center Stand makes it easy to perform chain lubrication, oil replacement, and other operations.
The shape is beautiful compared to other companies' products.
There is no Demerit, so I will not write about the bad points.
It would be a shame to damage the CoolExhaust System, and the Center Stand is really useful when it is available, so I think this is a must.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 400
Mounted on ZEPHYRX
The installation was easy, and the installation was done according to the instruction manual with the Torque indication. The engine looks quite large at first after installation, but I hope this will be enough to guard the engine. I will ride carefully so that I don't have to take care of this product. View detail
Custom parts that go unnoticed
Installed on Z900RS.
Trial purchase for the purpose of Blacking out.
I guess Recommendation for those who are considering Custom inexpensively.
View detail
PetitCustom feeling too!
Lowdown so I went to Short Side Stand because I was standing too much in NORMAL Side Stand.
Then this one tilts too much….
I put Boots on and it was a bit of a nice tilt.
A little processing was required, but it is easy to do.
I like it because of the PetitCustom feel.
View detail
Recommended for those who are concerned about stopping posture when using Lowdown Link!
I installed a Y's Gear Lowdown Link when I purchased the vehicle, but when parking Standing still. I was always concerned about the posture of the
I was considering modifying the OEMSide Stand, and when I saw a post on Impreza about a person who had similar problems that were improved by installing this product, I immediately purchased it.
Installation is also easy if you are confident in your arm strength.
After installation, I feel very secure when parking the car.
The precision of the product is comparable to OEMParts and is not different at all.
I would recommend it to anyone with similar problems.
View detail
Mounted on REBEL 1100
I bought it to install it by myself, but I had to remove the Mount Bolt from the Engine... I thought it was too much to handle, so I had the Shop install it for me. It took about 2 hours even for the experienced staff. I am satisfied with the tightening of the foot and the improvement of the parenthesis. View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), BMW S1000RR, DUCATI , HONDA , KAWASAKI Z800, SUZUKI , TRIUMPH DAYTONA675, BMW S1000RR
The texture is elegant.
I bought it just for the looks.
The quality is good and I have no complaints.
View detail
I've been using it well since purchasing it.
hello. I am the owner of a 19 year old Z900RS Hongryeon in Korea. I purchased the engine guard I always wanted at WeBike with a 20% discount on the overlacing engine guard.
A jockey is required to install this product, so be sure to install it at the center!
I hope there will be more sales in the future ------------------------------------------- --------------- hello. He is the owner of the Z900RS 19-year red lotus in Korea. I bought an engine guard I usually wanted to have with a 20%discount on the over -racing engine guard at Wewbike. Be sure to install it in the center because you need jaki to install the product! I hope there will be more sales in the future. Powered by Google Translator
View detail
Fits: DUCATI Panigale V4, DUCATI PANIGALE V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER V4 S
Side Stand is perfect!
Panigale and Streetfighter boots do not have good footing for most Japanese people. I am 177cm tall, but when I use a type of racing boots with the heel covered with a resin protector, like the ones from Pine Starz, the part where the heel hooks onto the side stand is too short and I slip and run away. When I am in the riding position, I can get it out with about a 50/50 chance, so when I am in good health, such as when I am refueling, I can stick it out a few times, but when I am tired, I can't get it out. No more." and I had to get off the Motorcycle and take out the Side Stand. If I had a normal leather or rubber bike, I would be able to get off the motorcycle and put out the Side Stand without any problem.
The AELLA product is almost twice as long as the AELLA product, so the Side Stand can be easily produced.
View detail
Wow that's cool
I installed it because I was lonely around the Front.
Circuit also runs, so Protector in the event of a fall.
I hope it will be ??
View detail