Reviews
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Interference with exhaust pipe of PowerBOX.
Exhaust pipe is SP Tadao's PowerBOX and Silencer is YOSHIMURA. However, when we tried to install the bracket, the bracket interfered with the exhaust pipe and could not be installed. I was able to install the bracket by shaving 5mm off the interference part with a grinder.
As for defenses, this will certainly protect Radiator.
It seems to be easy to wake up in case of a fall. (^^)
It looks Matcho and it looks good!
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
The product was more beautiful than the picture.
I still liked the color. View detail
Frame protection and improved gripping
Off-road motorcycles tend to peel off the paint on the frame when riding in Boots, because the frame is inevitably caught between the legs when standing.
From the viewpoint of preventing paint from peeling off and rusting, it is recommended to install frame guards.
Installation is easy because it is only fastened with a washer (sturdy rubber), but side covers and sprocket covers cannot be installed properly unless they are removed, even if it is a pain in the ass. It is a bit of a hassle, but it would be better to remove the Cover before installation.
View detail
It could be installed on the 2024MODEL.
*Caution [The official Manufacturer's Compatibility List does not include the 2024 MODEL TENERE700! As of March 2024
Please read this in light of the above.
As it turns out, I was able to install it on my TENERE700 (2024MODEL) without any large modifications.
The position of the Screw hole is slightly gapped and may require modification in some cases.
The Exhaust Pipe Guard interferes with the installation, so the installation can be done by bending it slightly.
The distance between the Left Radiator and the LowerGuard is close, but the product itself is rigid and does not seem to interfere unless it is knocked down too hard.
Installation prevents the Shroud from becoming cracked.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom250, SUZUKI V-Strom1000, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S125 ABS, SUZUKI GSX-S125, SUZUKI GSX-R125 ABS, SUZUKI GSX-R125, SUZUKI GSX-S750
YOSHIMURA.
I wanted Blue when I first purchased it.
I had no choice but to buy Red. Now I have Blue.
I noticed that it was on sale and bought it.
View detail
Fits: KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja ZX-25R, SUZUKI GSX250R, KAWASAKI Z650RS, KAWASAKI Ninja650, KAWASAKI Ninja400, KAWASAKI Ninja250, SUZUKI GSX250R, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI V-Strom250
Yoshimura rear stand bracket
Item received... material super nice..colour superbe red..install on bike and look super cool.highly recommend..thank you webike.packing was super awsome.my 9th purchase and never disappointing. View detail
Jack-up required
When you look down while straddling it, it has a cool Machine feel to it.
I am quite satisfied, but there is a caveat.
Although not mentioned in the Instruction Manual, the Engine must be supported by a Jack or the Bolt may not fit.
Specifically, when removing the OEM FrontEngineMounting Bolt and replacing it with the Engine Mount Collar Bolt, the Engine was lowered and the Bolt did not fit properly.
To prevent this, the Engine must be supported by Jack.
If it does not fit easily, fine-tune the position with Jack and never forcefully tighten Bolt.
You should really be careful because the worst that can happen is that the Engine side will be damaged and you will fly hundreds of thousands of dollars for repair and replacement.
Even if you ask Shop to install it, it is safer to ask a reliable place such as Plaza.
The Instruction Manual does not list the tightening Torque, so there is also a risk in that regard if you ask a contractor who does not refer to the Service Manual.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
No interference with POWER BOX
I installed it on my CRF-RALLY (MD47) and was not sure whether to purchase it or not because I had installed SP Tadao POWERBOXPipe item number:CR2-PB-21 on the exhaust pipe and there was a possibility that it might interfere with the power box. (Incidentally, ZETAPipeTank Guard item number:ZE55-1010 was answered that the POWER BOX part would hit the tank, so we decided not to purchase this item. I bought it with the intention of shaving it with a grinder if the need arises.
As a result, the Limit was not hit. Installation was not too difficult, and there was no interference with the frame or cowl. The style is now more adventure-like. The protection is still unknown because I haven't run or rubbed it yet, so I give it 4 stars.
DirtFreak's response to my last inquiry was very fast, and their response was very thorough and favorable.
View detail
… Failure.
It is not attached to the '23 model because of a model type mistake.
I gave it to a friend.
View detail
Fits: KTM EXC150 TPI, KTM SX125, KTM SX150, KTM XC125, KTM XC-W125, KTM XC-W150 TPI, HUSQVARNA TC125, HUSQVARNA TE150I, HUSQVARNA TX125, GASGAS MC125
be too soft
Used on a KTM 150EXC.
Purchased because it has a slightly wider range of protection than the Under Guard that comes with the OEM and is more reasonably priced.
The back end is hooked to the Frame and the front end is bolted via a special Bracket.
I was driving on a rocky OffRoad course and I noticed that the back end had come off and bLOOVE it. I thought that was ridiculous and reinstalled it by deflecting the product with my hand. It went back on easily. No, if it bends and distorts so easily, that's why it comes off right away. As I expected, it came off right away and I was in love with it.
I had no choice but to fix the back end with a thick Tie Band and ran that day, but I immediately returned to the OEM one and it has been in the drawer ever since.
It seems to come off easily when you go igoigo with the underbelly applied, so I guess it is good if the course has no stir, such as a rocky area. It seems that the position of the bolt fastening at the front end is too far forward, which is also not good.
I don't know about the SX and the Guard itself, as they seem to share the same fixing method, but the Guard itself is too soft anyway.
I also hit a rock hard under the belly with this Guard on and it dented the Frame a little. I am very disappointed, however, because I have never had a Damage on the Frame with the OEM Guard in the same way.
View detail
![[IDEAL] Swingarm Stand Hook](https://img.webike-cdn.net/catalogue/11500/006-S0801bkb_TS.jpg)
Fits: Others , KTM 1190 RC8R, KTM 1190 RC8, HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP, HONDA VTR1000 SP1, HONDA VTR1000 SP2
Casual Dress-up
For Front Axle Slider and Engine slider
I have Babyface on and a Stand Hook.
The same Manufacturer is used for this product.
View detail
It protected me from standing moss.
I had the same thing installed when I purchased the vehicle. It was not the original purpose of the Slider, but it helped. I only replaced one of the sliders. When I was replacing it, I was playing with the one I had installed and the Black Anodized was peeling off. .... How is it in terms of quality? I feel like I have to ask myself, "How is the quality of the product?" But there are not many other options for this type of car. I just hope I won't have a chance to replace it next time. I am very happy with the quality of the product and the points it comes with. View detail
Wide range of Guard
It is more solidly built than I had expected, and my imagination that it was just a plastic board was betrayed in a good way.
Installation is easy, as only four screws are needed for installation.
I think it is better to install it after Grease up well because the screw holes are likely to be rusted by water in the location.
Since it covers the underside of the Crankcase, I think the construction is quite promising in terms of Engine protection.
View detail
Great Looking Engine Guard
Out of all the available engine guard in the market, this Endurance Engine Guard blends in the best with the bike itself. Standing afar, you would not be able to differentiate the guard from the black original frame. The tapering of the guard creates a very nice flattering silhouette. Love it very much. View detail
To insure against standing over.
It was a little odd that the cowl had to be removed, so it was a little large, but I was able to install it. I don't know the Torque for tightening, so it would have been helpful if it was written in the Instruction Manual. View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
unaffected and sober
I chose it for its simple appearance because it is supposed to be left on. It works well when on duty without asserting itself. View detail
Axle Slider
Easy installation, just insert and tighten up, but the instructions are not good and some washers need to be added to tighten up. Looks good. View detail
Installed on CBR600RR (8BL-PC40) released in 2024
It was unclear if it would fit the CBR600RR (8BL-PC40) released in 2024,
Engine slider (item no. 006-SH041).
I'm a beginner, but how to remove Cowl and install Engine slider on Youtube,
By looking at it many times, I was able to install it without any problems.
Torque wrench, liquid Gasket, and Screw lock agent are required.
Digital Caliper helps in the selection of parts for assembly.
Photos are for reference only.
Since the body color is Matte Black, the base is anodized black.
I also wanted to make the slider cone a little more Large, so I changed it to L100D.
View detail
Can also be installed on SUPER CUB110 JA59
Installed on SUPER CUB110 JA59.
The work itself can be easily installed with no problem at all, but it is too long for the SUPER CUB and the body will stand up a little.
View detail
Custom
Items we do not want to be indebted to you.
The appearance of custom feeling will be increased.
View detail