Reviews
Good texture
I purchased the zrx1200daeg because the Handlebar area was too tight to fit the Smartphone Holder and USB power supply.
Although a Handlebar Clamp needs to be purchased separately, I am satisfied because the Smartphone Holder and USB power supply are mounted a little higher than the Handlebar.
View detail
As Handlebar MountingPoint.
Installed on '23 CB1300SB SP.
I found the quality of the Single Item to be very good. There was of course no extra rattling or BALI, and an L-shaped hexagonal wrench was included for assembly.
After installation, I did not expect it to be effective as a Brace bar because I am not at a Level where I can tell the difference as a running bar, but I think it is valuable enough as an installation point for Smartphone Holder, power supply, etc. I think it is worthwhile as an attachment point for a Smartphone Holder or power supply, etc. Since it is a product that can be adjusted in length to begin with, its rigidity as a Brace bar is a bit of a puzzle.
Nevertheless, I am satisfied with the firmness after tightening each part, and I think it is universal enough for various types of cars, so I felt it is a good product. On the other hand, I am a little worried about how the clamp part will attack the handlebar.
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
OK
[How is it used?
about a month
Was the one you received as per Image?
Yes
Was the installation difficult?
It's so easy!
How was your experience with it?
I used to use Slim type.
Changed to use Smartphone Holder here.
Easy to install, but parallel, or should I say straight.
How far you are willing to compromise is up to you.
For perfection, the only way is to use a Motorcycle stand and a level.
The price is a little high, but...
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
To install Holderetc.
I purchased this to attach a Smartphone Holder and USB power supply. The thickness is uniform, so it can be positioned freely. View detail
Fits: SUZUKI V-STROM250, SUZUKI SV650, SUZUKI SV650, SUZUKI GSX-S125, SUZUKI V-STROM250, SUZUKI V-STROM250, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA MONKEY125, HONDA MONKEY125, HONDA DAX125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX
I put it on for appearance.
I bought it because I wanted to put a Handlebar Cross Bar on my Grom.
I'm not going to put a Smartphone Holder on the bar, but I wanted to try it anyway.
Another reason we purchased the product was that we wanted it to be BlackGold color.
However, when I put it on, Parenthesis was surprisingly good, and my wife loved it.
View detail
Fits: HONDA FORZAX/Z(MF08/10) PS250, SUZUKI SKYWAVEtypeS/M(CJ/CK44A CJ45A/46A), YAMAHA MAXAM_MAJESTYC, Others for Φ7/8-Inches Handlebar
Surprisingly effective.
I happened to use it before on an XG250 TRICKER.
I had put it in storage after replacing the Handlebar on my XG250 TRICKER, but I was concerned about the distortion and restlessness of the OEM Handlebar Up Type on my Z125PRO, which I believe is for the Z.
I wondered if I could reuse these parts, which are essential for off-road vehicles, and installed them.
Installation is also easy, as it is simply fixed horizontally to the point where there is no play.
After installation, the handlebar unexpectedly or surprisingly calmed down considerably and improved maneuverability.
Negative sensation also increases the Direct feeling on the road surface, so if you are nervous, you may be bothered by the vibration, I found it easier to ride with less firmness and unnecessary movement of Steering.
By the way, recently, many people seem to be attaching it for fixing Camera and Smartphone.
View detail
Fits: HONDA GROM, SUZUKI V-STROM250, SUZUKI GSX-S125, SUZUKI V-STROM250, YAMAHA MAJESTYS, SUZUKI GSX-S125, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX160, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, SUZUKI V-STROM250, HONDA PCX150, SUZUKI GSX-S125, HONDA PCX150, SUZUKI SV650
The SV650
[How is it used?
For mounting Smartphone Holder and USB
Was the one you received as per Image?
Yes
Was the installation difficult?
It is only a Hexagonal Wrench, so anyone can do it quickly.
How was your experience with it?
I'm not sure about the vibration as I put it on right after I bought the Motorcycle.
It would be a great place to attach Smartphone Holder or USB
[Included Parts:were they on?
Included Parts:were not available
[Was there anything that disappointed you?
There wasn't one.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA MAJESTYS, YAMAHA MAJESTYS, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX eHEV, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM
Installed on a JC75 Grom.
The Grom is a single cylinder, so there is quite a bit of vibration.
During prolonged continuous operation, the vibration of the Handlebar causes numbness in both hands.
I replaced the Bar End with a heavier one, but it was still burning out, so I purchased this product.
Installation itself was easy with only a Hexagonal Wrench, but I had to be careful to adjust the angle of the Clamp so that there would be no gap, and to assemble the bars parallel to each other.
Compared to before installation, the rigidity of the handlebar has increased and the vibration transmitted to the hand has decreased.
The degree of burble in Idling has also changed.
In the future, we may attach a Smartphone Holder, etc., so it will be convenient to use in that case.
View detail
Fits: HONDA CT125・CT110 HUNTER CUB, HONDA CT125・CT110 HUNTER CUB, HONDA CL250, HONDA CL500, KAWASAKI Z650RS, SUZUKI Gixxer 150., SUZUKI Gixxer 150., SUZUKI Gixxer 250, SUZUKI GSX250R, SUZUKI V-STROM250SX
Tightens around the handlebar.
The appearance around the Handlebar is very tight.
It is also convenient for attaching the Smartphone Holder.
It was very easy to install
The price is low and very satisfactory.
View detail
Adjustable brace bar
I changed to a wider handlebar and couldn't find a brace bar to fit in until I found this adjustable bar by SSK. Overall, I like it very much as I'm able to mount a switch for additional spotlights. View detail
Easily organize around Handlebar
The handlebar area is now organized and refreshed, and the style is more to my liking. View detail
A little overpriced.
The Red color has faded away so I replaced it with Silver. I don't remember the length of the brace, but the standard length brace has a quantity angle for CB400.:Pair (for Left and Right) Brace is recommended to be a little shorter. I wrap a gap tape around the handlebar clamp to prevent damage to the handlebar and then tighten the clamp. View detail
Fits: HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION, HONDA CB1100 EX
It is beautifully made.
Recommended for customization around Handlebar!
Makes for a gorgeous Handlebar surround!
It's solidly structured and built, and has a high-end feel to it!
View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI SV650, YAMAHA MAJESTYS, SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-S125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA GROM, HONDA PCX, HONDA PCX, HONDA PCX
Handlebar shake is gone!
It was the right decision to put it on.
No more blurring during the GEAR Chain!
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
I put it on my NC750S.
I had 5InchNavigation directly attached to the Handlebar, but decided to install this product when I replaced it with 7InchNavigation. I thought it would be a little bit in the way because the parking brake is located on the left side of the handlebar, but I was able to install the Limit.
7InchNavigation and a smart phone are attached to this Brace. 。 Large Navigation is now easier to see because it can be attached straight instead of at an angle. 。 Size is "S" 255mm.
View detail
It is the picture attached to the normal handle of XR230. It cannot attach, although the bar pad was also purchased. He repented [ that what was necessary was just to have purchased LONG on a one size, and ]. This place is sold off by Yahoo! A
It is the picture attached to the normal handle of XR230.
It cannot attach, although the bar pad was also purchased.
He repented [ that what was necessary was just to have purchased LONG on a one size, and ].
This place is sold off by Yahoo! Auctions, and is newly Mr. Webike, and is due to purchase LONG.
When it measures, I would like to see it exactly to the place of LONG whose MINI size is newer than the standard on it, although the bar pad purchased the MINI size of ZETA.
View detail
A set of the circumferences of a preparations handle was changed into commuter rapid-service specification. As a result of examining many things, the product made from POSH out of which a feeling of unification comes was used. A handle bracket, a
A set of the circumferences of a preparations handle was changed into commuter rapid-service specification.
As a result of examining many things, the product made from POSH out of which a feeling of unification comes was used.
A handle bracket, a handlebar, a handle brace, a handle brace clamp, bar end, and a heavy weight nut were made the product made from POSH.
Color was unified by champagne gold.
When the vibration at the time of a run was reduced, there is also Schopp's recommendation and it equipped with the handle brace and the handle brace clamp.
Since the direction of the effect carried out simultaneous wearing also of heavy weight bar end and the heavy weight nut, the effect of the simple substance was not able to be checked, but it became the feel gently carried out compared with normal as the whole being operative.
Since there were also the master cylinder of a brake and a clutch and hose exchange besides the above, attachment was requested from Schopp.
However, as long as a configuration is seen, even if it equips by itself, I think that it is possible in about several minutes.
Since the master cylinder of a brake and a clutch also chose the gold of the daytona nisshin, there is a feeling of unification, and it was finished in the satisfying thing.
View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
Handlebar Brace
I purchased the wrong product and returned it, but as far as I could see from the bag the product seemed to be of good quality.
Most of the Big scooter's Pipe Handlebar seems to be able to be installed.
View detail
Fits: KAWASAKI Z125 Pro, HONDA PCX125, HONDA PCX150, HONDA PS250, HONDA glom, HONDA FAZE, HONDA FAZE Type S, HONDA FORZA Z ABS, HONDA FORZA(MF08), YAMAHA MAXAM, YAMAHA MAJESTY250(SG03J), SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S
Used with GSF1200HURRICANEHandlebar
Vibration on the Steering is reduced. 22.2, so a Smartphone Holder or USBCharger can also be attached. View detail
Fits: HONDA CB1100 EX, HONDA CB1100 EX, HONDA CB1100 RS, HONDA FUSION, HONDA FUSION, HONDA FUSION
Best for Europe4 type
[How is it used?
Installed on a HURRICANEEuropean4 type.
Was the one you received as per Image?
I think it is the usual HURRICANE quality. I like the honest, non-flamboyant design.
Was the installation difficult?
No problem.
How was your experience with it?
I installed it to prevent a large vibration of the entire handlebar, and it has eliminated the shaking of the entire handlebar, but instead, the grip now vibrates with a relatively large amplitude.
I'm changing the Grip to Pro grip so it's not unbearable.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I would like to run around with the handlebar installed to see which is more comfortable, the vibration around the grips or the vibration of the whole handlebar.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I had a lot of trouble deciding which size to buy when I purchased the product. In the end, I measured the handlebar after it arrived and ordered the MSize based on my guess. The result was OK, but I think it would be helpful if you could list the Large or other compatible sizes for each handlebar model, even if it is only for the Made by HURRICANEHandlebar.
View detail