Reviews
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
Scooter for commuting
I installed it after I replaced it with the HURRICANEHandlebar Kit. It looks much better. View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
Extra thick and not bad looking.
I was wondering if the length would fit, but I was able to install it with the SS Size, and since the Handlebar is black, I think it fits well with all black. View detail
As long as it's in place, it's fine.
It's in the reviews of others. "Adjust comes loose on the road. It's not likely to come loose if it's tightened firmly in either direction. I've been walking about 100km in the mountains, but it didn't loosen up. It is not loose if you tighten it firmly to either tighten or shrink it according to the shape of Handlebar because I was worried about it. View detail
The variable-length Handlebar Brace is really useful.
I installed this Handlebar Brace on the CT125CT110 HUNTER CUB to use for various mountings.
Concretely, I will mount the Universal Screen of the Handlebar Mount of MRA to this Handlebar Brace instead of Handlebar.
Delayed delivery
With the Handlebar Mount installation, the range of motion is usually wide, but in reality, there is little or no adjustment range.
As I have a herniated cervical disc, it is absolutely necessary to have a windscreen with high wind protection, so it is mounted on a horizontal bar to secure the range of motion.
This way, if you just want to swing up and down, you can move completely freely.
It is possible to cover up to the top of the screen, although there are some restrictions on the screen's installation angle.
Of course, I'm also going to install Ram Mount's XGrip Ta BrettMount and Droreko BodyMonitor's Mount
View detail
Solidly built.
I bought it with the same manufacturer, Brace, but I didn't learn enough and it was too Exactly I couldn't adjust Clamps, so I shaved a little bit with Grinder, but I shaved it off. The cylinder hides the cylinder so there should be no problem with its appearance.
View detail
That would be handy
Later, I bought it to attach a Porch to put in a Small object etc. 。 You can also attach a smartphone holder to this product if it's attached, and you can also use the A I recommend it because it gives a little bit of a custom feel. 。 View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
It's more than a utility bar
It's my intention to make the Handlebar area as simple as possible, but it seems to be the case that the Grom's The thin iron Pipe is not encouraging and looks shabby; it's a Large standing bar I'm also somewhat worried about the strength In fact, when I pick up the Gap while HardCornering, it is a little bit shaky I thought about replacing the Handlebar, especially to make it aluminum (a little more forward leaning) I don't have a suitable one (and it's easier to ride), though I'm worried about the strength if I don't make it a fat bar Clamp has to be changed, and I'm worried about handling Hose and Cable, so much for that I don't want to do it As far as I'm concerned, as long as it has the necessary strength, it doesn't matter if it's iron or not So, what do you think of this kind of Handlebar Brace? I've always thought it was a standard reinforcement method for Off cars
But, according to my trusted motorcycle shop, the It's just for decoration, you know, because a lot of people wear their phones and stuff Well, do it with a USB power supply, smartphone holder, etc I don't want to Of course I don't need ETC, and I don't want to use RAM-MOUNT's clamp type (not resident) It's very easy to use, and Navigation is rarely used Since you won't need it, you can only clamp to the Handlebar when you really need it, and You can only use the Smartphone Holder for that time Then, when I shoot driving videos with my GoPro, I like to have a place to clamp it There is also a method of clamping directly to the Handlebar, but the angle is quite high So it is somewhat difficult to adjust the position
So...I decided to put this Handlebar Brace on First of all, I only expected it to be an utility bar. 22mm thick type I didn't want to make it stronger or anything, but simply because it's the same thickness as the Handlebar The RAMClamp is easy to install
As a result, the parts that arrived were extremely heavy It's actually very heavy It's very difficult to adjust the angle of the clamps Clamps are not in between, so I have to loosen up Perfect rigid mount with 4 screws After fixing the bar, the position of Lever was returned
So when I ran after installing it, I was pleasantly surprised by the miscalculation As I mentioned above, I wasn't expecting it to function as a Handlebar Brace at all The feel has changed properly First of all, the vibration is reduced There may be an effect of the vibration absorbing Hand guard that I just installed the other day It's even less And yet, it feels like you're touching something extremely hard, and the front area is even more relaxed It was Example Brrrr There is no face White, I deliberately picked up the Gap with the front wheel many times, but I went over the stoner and It is
At best, it's nimble and at worst, restless, which is the fate of the front and rear 12-inches groms Front in particular is vulnerable to disturbances, and when you step on the Gap in the middle of Corner, it's quite unpleasant! It got better Of course, the Stem Stabilizer from OUTEX, which has already been addressed, and KOOD's Thanks to the ChromolyShaft, Front was already better for Large I'm not satisfied yet, and I've already decided to change Spring and Fork oil Parts have been ordered Brake will be strengthened in the future So, considering that the load on the Front will become even more The Handlebar Brace feels reassuring
At first, I only intended to add a utility bar, so it was a nice miscalculation Ta I mean, the product is properly named Handlebar Brace! So I think it will meet the expectations in that direction as well If it were just about strength, though, I think the thin one would be enough
View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
I think it has excellent performance, looks and cost performance
The purpose of purchasing the Handlebar Brace was to get a dress-up and a handlebar surround It was for the installation of Mobile phone and others
The first purpose of the Dress-up is as plain as I aimed to be when I saw it installed in person (lol)
I wanted to create a tighter look by using Black in the various color products sold on the market was good
I think that this product itself is simple and is a good product However, if it is possible, please make the Cap screw of the attachment also Black to match the color of the body I wanted it ← Is it too plain? (Laughs)
It's a length, but at 240mm in SSSize, I think it's just right for me
The next step is to increase the rigidity of the car when it is entering the corner and while cornering The vehicle body will not be stable when adjusting it, but the handlebar area, front fork We thought it would be better if we increased the rigidity
There are several parts to increase the rigidity of the front area, but this time we will use the Handlebar I chose the Brace After I installed the Brace, I took it for a test run on a short mountain road that I often drive on, but it was pretty good So-so? It came to be able to trace the Line as I thought To become able to be able to do Cornering comfortably, there is still more to be done including the skill
Regarding the installation of the last Mobile phone etc., it is Mobile I haven't received my phoneHolder, so I haven't been able to try Mobile phone I installed a WearLOVE Le Camera (GoPro) But I didn't want to use it because the visibility of the meter would be compromised & the Camera position would be too high
These are the ratings for Large bodies
I'd like to add a review if I find out any other details
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
It is in use with W800 after replacing EZ-FIT-Bar
EZ-FIT-Bar (For GSX 1400) It is in use at
I was worried about the Handlebar Brace from another company, but the beauty of Plating made me think about it I chose HURRICANE
The above EZ-FIT-Bar is Exactly 255mm size
What did I think of the installation? It's not very good It's not very good, I feel like it's far from the classical images of old cars I think it's a very good product But the product itself is good quality and good in my personal opinion
But it's Neck that's a bit expensive
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
You're glowing
A painful work scooter, SEA BASSCJ42A, which I installed in my 17th year of redecorating I got the HURRICANEHandlebar from We-Big and the Touring? Quantity:It is Pair The recommendation is MSize, but it seems to interfere with Brake master This time I used SSize255? I was troubled a lot I selected and erased and selected and erased View detail
Fits: KAWASAKI Z125 Pro, YAMAHA MAJESTY250(SG03J), YAMAHA MAXAM, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgman TypeM, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FAZE Type S, HONDA FAZE, HONDA glom, HONDA PS250, HONDA PCX150, HONDA PCX125
I am satisfied
It has enough texture and feel
If it was a little cheaper at this quality, I would be Large satisfied with it!
The vibration of the Handlebar was suppressed and the rigidity of the Handlebar was improved I haven't noticed any changes, but I haven't noticed them because I can only run them in a humble way It may be that
View detail
Reliable quality
I used it in combination with EFFEX EZ-FitBAR
It was very short and just the right length
It is made by a famous manufacturer, HARDY, and although it is not cheap, I am satisfied with the construction and texture It is
There was a little bit of a clatter in the Brace section, so I put a RubberRing between them
View detail
Do you think it's expensive?
I bought it to install the ActionCam mount to the D-TRACKER125 It is good that it is easy to choose from a wide range of colors and lengths, but the clamp part must be purchased separately I can't afford not to install it If you buy both, it will cost you a lot of gold But in my case, I really wanted to match the color of the OEM handlebar It's safe to say that I had no choice It's not a good idea to buy a cheap one that doesn't match the colour because you won't be happy with it anyway Installation is very simple but Quantity:Pair (for Left and Right) I had to adjust the height of the bar, otherwise it would be attached at an angle, so I installed it while making fine adjustments The color is perfect! The color is so perfect that you'd think it was OEM parts for the D-TRACKER 125! View detail
Fits: HONDA MSX125 (GROM), HONDA MSX125 (GROM), HONDA MSX125 (GROM), HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX125, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA MONKEY125, SUZUKI GSX-S125, YAMAHA MAJESTYS, YAMAHA MAJESTYS
Attachment abundant
While installing, I lost Bolt by losing it and I was despairing, but there was exactly the same thing at Home center and I got a jobless thing.
It is equipped with Smartphone Holder and Drive Recorder, but it can be used without problems.
View detail
If it looks good
If the mounting angle is fixed, if the diameter of the bar is a little thicker ○ Kana, so far as I use it for Helmet's Wire lock, afterwards with Parenthesis View detail
Dress-up than vibration countermeasure
I installed it in the CB 750.
Besides the price, the quality is not good.
As a countermeasure against vibration, I did not expect it, but is it some enhancement of Handlebar?
It is not well understood.
It is Large effect as Dress-up. The Universal nature of Handlebar is also quite high.
Installation is easy. There is neither looseness nor gap in Gap. I think that it is a conscientious product though it may be safe.
It would be better if the color variations were more abstracted.
View detail
Fits: HONDA 400X, KAWASAKI W800, KAWASAKI EPSILON150, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE400 burgman Type S, HONDA CB500X
handle bar brace s size
my bike honda ps250 im bought handle bar brace s size blue very well fitable my bike ps250 able bar brace m size but s size is better View detail
It was useless..
I did not match pcx! I ordered it by looking at the impule that conformed to pcx, but unfortunately it did not fit. There is no help but I give it up.. To be sorry View detail
Feeling fiddling. I will soak in my self-satisfaction.
I installed it on the ZrX 1100. It is OEMHandlebar.
Choose Blue to fit the car body color. Installation is simple. OK with on-board tool. The texture is satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
I tried to actually run, but after running it did not slip or loose.
Impression sentences are the same as Shaft, but I changed the pictures.
View detail
I have a good texture.
I installed it on the ZrX 1100.
It is OEMHandlebar. Choose Blue to fit the car body color.
Installation is simple. OK with on-board tool. Feel satisfactory.
Although there is no change in running, there is a sense of messing around and I am immersed in considerable self-satisfaction.
The purchase reason is the installation of ActionCamera. It got together beautifully.
Shaft and Quick Release Brace Clamp purchased with Set.
Shaft does not come with us, so please join us.
Since both Color are abundant, various combinations can be done.
I tried to Blue and Matte Black. I like it..
Impression sentences are the same as Shaft, but I changed the pictures.
View detail