Reviews
Angle the Mirror
The Mirror Holder for the external Master Cylinder is only 90 degrees to the Cylinder, and the angle is different from that of the Normal Clutch Side Holder. Although this is not the normal way to use the Mirror Holder, this product can be used to match the angle and position of the Mirror Holder on the NORMAL side without any discomfort. The angle is about 20 degree backward inclination. When I used it for brembo, I had to widen the hole slightly, but when I used it for MT-10's Normal clutch, I felt almost no discomfort. View detail
Good product
The MRMirror I own has a footing Plate B Type and I have just purchased this product to install on my ZrX400.
The price is high, but the accuracy is perfect because it is a dedicated product.
View detail
Conversion fixed
The Fixing Screw diameter of the Mirror I tried to install seems to be different, and I wanted to fix it with M10→M8.
The price is not too expensive, the size is not too large, and it can be fixed in a good way.
View detail
Adjust Mirror position
Spacer is included to accommodate multiple handlebar diameters.
Because of the Spacer of the genus Gold, it may damage the Handlebar in some cases.
Convenient for adjusting the angle and position of Mirror.
View detail
Only Yamaha can do it.
Since RoseRose is the way to sell Mirror by Manufacturer, I would like Adapter to think of various combinations and sell them as well. View detail
Opposite Thread Screw Adapter
I purchased the Opposite Thread Screw Adapter because it is essential for Yamaha cars.
However, the Mirror position is higher due to the Adapter, so it would be better to have a lower Adapter.
View detail
Height adjustment
I bought a pair of mirror and did not notice the mounting on the left hand side is lower. As such, I need a higher adapter. Quality wise is quite solid and good but shipping is a bit pricey. View detail
Design is good
This is a quintessential Tanax.
It is an itchy product.
Quantity:I would be more than happy if they were sold in 1pc. units instead of 1 set of 2pcs.
View detail
Used for Mirror of the same Brand
[How is it used?
Used for Mirror of the same Brand.
Was the one you received as per Image?
Yes, it could be used normally.
Was the installation difficult?
It is easy because all you have to do is turn it.
How was your experience with it?
It's working fine
[Included Parts:were they on?
Adapter only.
View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
Used for Mirror position adjustment
It was matte and rough, not the smooth look I had imagined from the picture.
It is expensive, but I am happy that I put it on.
View detail
Savior in times of trouble
I purchased this product because of the lack of adjustability after replacing the Handlebar&Mirror.
There is no problem in terms of quality, but it looks like it was made by welding Bolt/Nut, and I would like to see a clean look like Cut-out.
The lack of the desired Mirror adjustment range has been resolved, so there is no problem in terms of functionality.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
Yamaha's Opposite Thread Screw is a pain!
Since Yamaha's MotorcycleRight Side is an Opposite Thread Screw, it is a gate that everyone must pass through when replacing the Mirror.
I have to bother to bite the Adapter, but I can't help it since it is a Spec. (Lol)
As for durability, it is Steel and will eventually get Rust. In my case, I am sorry to say that the Screw pile somehow lost out to Aluminum and was crushed.
View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Mirror adapter.
Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... Acquired for moto Honda Monkey. Once again I take these adapters and once again I have to edit the internal thread. The price of adapters is rising, but unfortunately there is no alternative. Sadness... View detail
For Mirror height adjustment
I bought this in the store to adjust the height of the movable mirror. I'm very happy with it. View detail
Fits: HONDA Monkey Limited (MONKEYLIMITED), HONDA SUPER CUB 110 (SUPER CUB), HONDA Monkey (MONKEY), HONDA ZOOMER (ZOOMER), HONDA ZOOMER, HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA SUPER CUB (SUPER CUB), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 STD (CUB PRESS), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA SUPER CUB 110 (SUPER CUB), HONDA PRESS CUB 50 DX (CUB PRESS), HONDA LITTLE CUB (LITTLE CUB)
Mirror adapter NTB
A useful detail. There are no complaints about the material and external thread, but the internal thread was poorly executed. I had to go to the master for internal threading. Due to the fact that there is no alternative to these adapters, in the future I will order them and roll threads if necessary. A useful detail. There are no complaints about the material and external thread, but the internal thread was poorly executed. I had to go to the master for internal threading. Due to the fact that there is no alternative to these adapters, in the future I will order them and roll threads if necessary. View detail
I used it for MeterCustom in DAX.
When replacing the DAX Meter with a Takegawa
I used it as a mount base to the Handlebar.
Compact both horizontally and vertically, so you have a lot of flexibility.
It's easy to see and I was able to put the Meter in just the right place.
I think they are the same as the Navigation Holder Parts, but they are 22.mm and 25mm.
It can be used with both Handlebar, so it is useful for Custom use.
View detail
The Adapter for Shark mirror
I bought the Shark Mirror 4, but the Brake master cylinder seems to interfere with it, so I bought this one. It is a solid construction because it is made by Tanax.
However, for some reason, the screw on the Mirror side has a forward and reverse Quantity:Set。
Quantity of positive and positive or reverse and reverse:I think that the lack of Set is not a good thing cosmetically. I wanted the reverse and the opposite, I had to buy two.
View detail
Expected
I bought and used it as a spacer because the mirror position of other companies is low. I am satisfied with the sense of unity that I cannot think of the other company's product. It is convenient if there is a little longer use. View detail
APE 100
Used for APE 100
TypeDMASTER is positioned in front of the
I bought it for adjustment because the Takekawa Clutch lever is later than the MASTER with Handlebar core.
The height is possible by adjusting the Mirror
Quite a bit of back and forth Quantity:Pair (for Left and Right) It takes a long time to match them evenly, etc., but there is no scope for compromise and self-satisfaction.
Quantity:Pair (for Left and Right) It is good if this price in …
View detail
![Spare Parts [Spare Parts]](https://img.webike-cdn.net/catalogue/images/40953/G18BB927-G18BB930_TS.jpg)
The number of pieces at the time of purchase 1 is a Single ItemQuantity:Pair (for Left and Right) Not, and Size is careful.
It is only marked 13mm, but it is for 13-17mm
Single Item, so Quantity:Pair (for Left and Right) The quantity to fit in:2pc. Set required
I'm a newbie to Motorcycle, so I didn't know what to expect, so I just bought it and it was a Single Item.
The Handlebar inner diameter is only 13mm, but it is for 13mm-17mm.
Please note that it takes quite some time.
Webik should be a bit more annotated.
View detail